BAKKER ELKHUIZEN EnergyByLight LED Desk Lamp User Manual
- June 2, 2024
- BAKKER ELKHUIZEN
Table of Contents
EnergyByLight LED Desk Lamp
User Manual
Package Contents
- Brightness & on-off
- Colour temperature
- Only with brightness can you turn on the lamp and turn it off with a short press.
- Window for direct task lighting. Pay attention : Do not look directly into this window, you will look directly into the LED and this poses a risk of eye damage.
A EnergyByLight
B Adapter
C Plug attachements
D Manual
Installation
Never look directly into the LED. That creates a risk of eye
injury!
Place the lamp on the opposite side of the keyboard to where your mouse sits.
Circadian rhythm activated via the app?
If you manually change the rhythm on the lamp using the buttons on top of the
EnergyByLight (brightness and/or colour temperature), the circadian rhythm
will only go back automatically when the EnergyByLight is switched on again.
Safety
For your safety
The EnergyByLight is designed according to the latest standards, manufactured
with the greatest care, high-quality materials and extensively tested.
Nevertheless, its use may pose a risk to persons or cause material damage.
Please read the instructions and the installation steps carefully before use.
Failure to do so may result in injury or material damage. Always keep this
manual for future reference and keep it accessible.
-
The EnergyByLight is intended for biodynamic (task) illumination of a workplace in
dry indoor areas at a maximum ambient temperature of 25 degrees Celsius. -
Safety class
-
Protection class
-
Only use the EnergyByLight if it is in good technical condition
Electrical Safety
-
Fire hazard: Do not place any objects on top of the EnergyByLight.
Do not cover the EnergyByLight with a blanket, cloth or other objects. -
Do not use the EnergyByLight in damp areas, do not allow the EnergyByLight to come into contact with water/moisture.
-
Connect the EnergyByLight to an earthed mains socket which is technically in order.
-
Ensure that the mains connection corresponds to the connection details of the EnergyByLight.
-
Do not pull the mains cable out of the socket by the cable, but by the plug.
Never do this with wet hands. -
Ensure that the power cable is not damaged (during operation). If it’s damaged, it must be replaced by an original cable from the supplier or a similar qualified person in order to avoid a hazard.
-
If the power cable is damaged, pull it out of the power socket immediately.
Never use the EnergyByLight with a damaged power cable. -
Before carrying out any work on the EnergyByLight, the power cable must be disconnected from the socket.
-
The light source of the EnergyByLight cannot be replaced. If the LED has reached the end of its service life, the entire product must be replaced.
Maintenance & Service
Technical specifications
Bluetooth specification:
| • Frequency band: | 2402-2480 MHz |
|---|---|
| • Maximum power: | 7.8 dBm |
Power supply
• Rated voltage:
• Nominal frequency:
• Plugtypes:
• Power:
• Output:| 220-230V
50-60Hz
EU, UK
15Watt
48V, 24Watt, 0,5A
---|---
Cleaning and maintenance
- Clean the EnergyByLight with a very slightly damp cloth (use diluted soap solution) and a soft microfibre cloth. Afterwards, treat the EnergyByLight with an anti-static agent using a soft cloth.
- Caution: Risk of damage to product. Do not use aggressive cleaning agents, solvents or abrasive and sharp objects.
- Danger: Danger to life due to electric shock. Never immerse the EnergyByLight in water.
Service
Customer service can be reached at:
- Telephone: +44 (0) 203 6083569
- E-mail via [email protected]
If you have any questions, always quote the serial number of the EnergyByLight, which can be found on the underside of the product, and the firmware version, which can be found in the EnergyByLight App.
Disposal
• **** The EnergyByLight is an electrical product with this symbol, which
means that the product must always be disposed of separately and must not be
disposed of with household waste.
• If in doubt, ask your local authority how to dispose of the EnergyByLight in
an environmentally friendly manner.
Packaging
This packaging is made of recycled material to protect the environment. Please
ensure that this packaging is reused or recycled.
Notes
BakkerElkhuizen
Taalstraat 151
5261 BC Vught
The Netherlands
+31 (0)36 546 7265
email. [email protected]
www.bakkerelkhuizen.com
All rights reserved. All trade names are registered trademarks of the
respective manufacturers. All specifications are subject to change
of changes without notice
EBL-D-01