Lumens VC-A51P Full HD PTZ Camera Installation Guide
- June 3, 2024
- Lumens
Table of Contents
VC-A51P/VC-A51PN Quick
Installation Guide
VC-A51P Full HD PTZ Camera
- A view of the camera’s I/O interface
- Instruction on DIP SWITCH setting
2.1 OUTPUT SWITC****
| Output Mode | Setting |
|---|---|
| 1920×1080/60p | |
| 1920×1080/50p | |
| 1920×1080/30p | |
| 1920×1080/25p | |
| 1920×1080/60i | |
| 1920×1080/50i | |
| 1280×720/60p | |
| 1280×720/50p | |
| 1080/59.94p | |
| 1080/59.94i | |
| 1080/29.97p | |
| 720/59.94p |
2.2 IR SELECT
After the IR SELECT is configured, it can be switched from the Camera Select
on the
| ID | Setting |
|---|---|
| 1 | |
| 2 | |
| 3 |
2.3 Camera Address Selector
| Setting | Function Descriptions |
|---|---|
| 0~7 | ID 0~7 |
| 8~9 | Reserved |
2.4 System Switch
| Setting | Function Descriptions |
|---|---|
| DIP 1 | RS-232C/RS-422 selector OFF: RS-232C / ON : RS-422 |
| DIP 2 | Infrared signal output switch OFF: Off / ON : On |
| DIP 3 | Communication baud rate selector OFF: 9600 / ON : 38400 |
| DIP 4 | Reserved |
Install the camera on the ceiling
-
Please adjust the resolution on DIP SWITCH prior to installation.
(Please refer to 2. Instruction on DIP SWITCH setting ) -
Fix the metal plate A on the machine base with 4 M3 silver screws.
-
Lock the metal plate B on ceiling mounted hanger
*Caution:
(1) Please use the hanger that has obtained UL security approval.
(2) Please reserve the hole for the connecting wires of the camera. -
Combine the metal plate A and the metal plate B
▼Push the metal plate A up to the ceiling and then to the right to latch the metal plate B.
▼And then secure with 2 M3 silver screws and 1 M3 black screw.
4. About the power supply
- Connect the DC12V power adapter for power supply
- Access power by using a router that supports PoE or connecting to a hub with a network cable
※ VC-A51P/VC-A51PN supports PoE+(IEEE802.3at)
Camera connection description
Web page setting
Open the browser, enter the camera IP address, enter the account and password,
you can enter the web page to set and control the camera.
The IP address can be verified by clicking [MENU] => [Ethernet] => [IP Address] on the remote control
If it is not connected to a DHCP router, the default IP address is
*For the NDI|HX operation of VC-A51PN, please download the latest NDI software from the NewTek website.
Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>