VEVOR JL-WB05-3 Workbench with Pegboard User Manual

VEVOR JL-WB05-3 Workbench with Pegboard User Manual

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFE INSTRUCTIONS

Please read this user manual carefully ！

Assembly Precautions

1. Assemble only according to these Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
3. Keep assembly area clean and well
4. Keep bystanders out of the area during
5. Do not assemble when tired or when under the influence of alcohol, drugs or
6. Weight capacity and other product capabilities apply to properly and completely assembled product
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded

Use Precautions

7. Do not attach or mount this product to a vehicle.This may cause personal injury or product
8. Do not stand or step on this You may fall which may cause personal injury.
9. Keep the product on level surfaces.The product may become unstable and tip if stored or moved on an unlevel surface,which may cause personal injury or product
10. Lock the drawers before moving this product.The drawers could come open and make the product unstable and tip,which may cause personal or product
11. Keep children and bystanders away while loading,unloading and moving the
12. Do not lift the product directly with a forklift or tow with any mechanical devices.
13. Do not exceed the maximum load capacity,including contents.Do not exceed the maximum load capacity of each Do not exceed the maximum load capacity of each tray.
14. Do not alter this product in any
15. The box contains some small components; please place them properly before installation to keep them away from kids and ensure
16. Before installing the socket, the desktop should be cleaned to ensure that there are no stains on the desktop. In particular, attention should be paid to not bringing water into the socket so as to avoid safety problems during subsequent

CAUTION: Carefully read instructions and procedures for safe operations.

SAVE THESE INSTRUCTIONS

PRODUCT INTRODUCTION

Model

SPEC.

| ****

JL-WB05-3

---|---
Maximum Load Capacity| 220lbs
Desktop Size| 12059.5cm
Material| MDF, Metal
Product Dimensions| 12060W*150cm

Rating(s)

| 120V~ 60Hz Max.1500W(Power Strip) with 14W LED Light
Pegboard| 118.5*59cm

STRUCTURE DIAGRAM

1. Pegboard 2.Desktop 3.Power strip    4.Leg    5. Drawer 6.LED Light

COMPONENTS

INSTALLATION INSTRUCTION

STEP 1 : Install the lower workbench support.

STEP 2 : Install the upper workbench support.

STEP 3: Assemble drawer and install drawer guide.

STEP 4:I nstall pegboard and supports.

STEP 5:I nstall roof and cover the upper and lower desktop. Install

power strip and LED light.

MAINTENANCE

1. Please try to avoid putting wet items on
2. Dust off regularly with a clean rag, and arrange items neatly on
3. Don’t let it sit in the sun for too
4. Check the table regularly to prevent screws from loosening and falling

VEVOR STORE INC

Address: 9448 RINCHMOND PL #E RANCHO CUCAMONGA,
California, 91730 United States of America
Made In China

**Technical Support and E-Warranty Certificate[ www.vevor.com/support**](https://www.vevor.com/support)

Read More About This Manual & Download PDF:

References

• Contact Us – Official VEVOR Support
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>