PROSCAN PKAR305 Bluetooth Speaker with Karaoke Instruction Manual

June 5, 2024
ProScan

PKAR305 Bluetooth Speaker with Karaoke
Instruction ManualPROSCAN PKAR305 Bluetooth Speaker with
Karaoke

PLEASE READ BEFORE OPERATING THIS EQUIPMENT
PROScAN’v Is A REGISTERED TRADEMARK OF TECHNICOLOR USA INC. AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.

SAFETY INSTRUCTIONS

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under the warranty for this product.

INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable; protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and Jose in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be I determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consul: the dealer or an experienced radio/TV technician for help.

“FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”
Before using the unit, be sure to read al operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

  1. READ INSTRUCTIONS
    All the safe). and operating instructions should be read before the product is operated.

  2. REIM INSTRUCTIONS
    The safety and operating instructions should be retained for future reference

  3. HEED WARNINGS
    All warnings on the product and in the operating instructions should be adhered to

  4. FOLLOW INSTRUCTIONS
    All operating and use-ins: notices should be Id-lowed.

  5. CLEANING
    Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or across cleaners. Use a dry cloth for dealing.

  6. ATTACHMENTS
    Do not use attachments not recommended by the product’s manufacturer as they may cause hazards.

  7. WATER AND MOISTURE
    Do not use this product near water—for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pod.

  8. ACCESSORIES
    Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may tali causing serious injury and serious darn-age to the product. Use oily with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sdd with the product Any mounting ol the product should follow the manufacturer’s instill:di: es, and should use a mounting accessory recommended by the manufacturer. BA. An appliance and cart combination should be moved with care.
    Quick stops, excessive force, and uneven surfaces may cause the appliance and cal combination to overturn.

  9. VENTILATION
    Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect ti from overheating. These openings must not be Socked or covered. The openings should never be docked by placing the product on a bed, sofa, rug, or another similar surface. This product should never be placed near or over a radiator or healing source. This product should rat be placed in a bult-in install such as a bookcase or rack unless proper ventilation is proved or the manufacturer’s instructions have been archery too.

  10. POWER SOURCES
    This product should be operated only from a type of power source indicated on the marling label. If you are not sure of the type of power supply to your home, consult your appliance desk( or local power company. For products interned to operate from battery power, or other sources, refer to the operating instruction.

  11. GROUNDING OR POLARIZATION
    This product is equipped with a polarized tter-nating•currere km pbg (a pbg having one blade wider than the other). Tit pbg wit S into the parer out arty one way. This is a safety lea-lure. If you are unable to insert the fully into the cutlet, try reversing the plug. I the pig ski still fails to fit, contact your electrician to replace your obsolete cutlet Do not defeat the safety purpose of the polarized Am.

  12. POWER-CORD PROTECTION
    Power supply cords should be routed so trek they are not! key to be wafted on or Oohed by items placed upon cc against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

  13. WHINING
    Te protects your product from a Lighting storm. or when it is left unattended and unused for Log periods of time, unplug it from the wall outer and discerned the antenna or cattle system. This will prevent damage to the product due to Ighlitng and odweplitie surges.

  14. POWER LINES
    An outside antenna system sholid not be boat-ed in the vicinity of overhead power Ines or other electric light or CO’Ner circuits, or where it can fat into such power Ines or circuits. When inning an outside antenna system Mime care should be taken to keep Iron: coshing such power Imes cc c nuts as contact with Vern night be total.

  15. OVERLOADING Do
    NC: overload wall toolkits and Benenson cords as this can result in a risk of fire or ekcInc shock.

  16. OBJECT AND LIQUID ENTRY
    Wirer push optics of any kind into his pod Jul botch openings as They may touch Coupon voltage points or short out parts that could rest in fire or electric shock Never spill or spray any type of liquid on the product.

  17. OUTDOOR ANTENNA GROUNDING
    If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and buit- up static charges. Section 810 of the National Electric Code, ANSIINEPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna dis-charge product, size of grounding conductors, location of antenna discharge product, connec-tion to grounding electrodes and requirements for grounding electrodes.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

  1. SERVICING Do
    Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer al servicing to qualified service personnel

  2. REPLACEMENT PARTS
    When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

  3. SAFETY CHECK
    Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

  4. WALL OR CEILING MOUNTING
    The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

  5. DAMAGE REQUIRING SERVICE Unplug the product! from the  wall outlet and refer servicing tc qualified service personnel under the following conditions: a, When the power-supply cord or plug is damaged. ©, WBquid has been spilled or objects have fallen into the product, c. The product has been exposed to rain or waler, d, Wthe product does not operate normally by following the operating instructions, Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may resuk in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, @, The product has been dropped or the cabinet has been damaged, {. When the  product exhibits a distinct change in performance this indicates a need for service,

  6. HEAT
    The product should be situated away from heat sources such as radiators, heat registers, and stoves of other products (including amplifiers) that pro- duce heat.

  7. NOTE TO CATV SYSTEM INSTALLER
    This reminder is provided to call the CATV sys- LEM installer’s attention to Article 820-40 of the NEC that provides guidelines or proper grounds ing and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Your Bluetooth Speaker

Features

  • Supports Bluetooth v5.0 +EDR
  • Supports profile A2DP
  • Supports automatic device pairing
  • Wireless range: 30 feet
  • Power button
  • Play pause/pairing button
  • Source(Bluetooth/AUX)dights ON/OFF button
  • Mode indicator
  • Charging indicator
  • Internal rechargeable battery
  • DC input for battery recharging
  • 3.5mm AUX  IN jack for player etc
  • Microphone jack x 2
  • Microphone volume control
  • Echo control
  • Volume control
  • Light up LED speaker
  • Extendable microphone  stand Includes
  • Microphone x 1
  • Extendable microphone stand
  • Micro USB cable
  • User manual

Charging instructions

This unit operates on an internal Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC SV/1A and up.

Charging the battery for the first time

  1.  Charge the internal Legion battery a minimum of 3 hours prior to first use, Plug the unit into the USB port on your computer or into a USB power adaptor (not included)
    using the USB cable.

  2. The CHARGER indicator will fight red while charging and light off when the unit is fully charged. Unplug the USB cable from the power source once the battery is fully charged.

Assembly

Connect the pole to the speaker base.
Insert the microphone to the top of the microphone stand and connect the microphone cable to the speaker base unit either MIC 1 or MIC 2 jack. Adjust the height of the pole to the desired level.

Features & Controls

Features & Controls

1. MODE indicator
2. Charging indicator
3. DC input for battery recharging
4, AUXIN jack
5, Microphone jack 1
6, Microphone jack 2
7. Microphone volume control
8. Echo control
9. Volume control
10. POWER button
11. Play/pause button
12, SOURCE (Bluetooth/AUX}Mights ON/OFF button
13. Light up the speaker

Bluetooth operation

External devices that have a built-in Bluetooth feature can connect wirelessly to this Bluetooth Speaker.
GETTING CONNECTED

  1. Power on the unit by pressing the POWER button on top of the unit and the MODE the indicator will be light blue and fash,
  2. Set the Bhictooth function of your extemal device to ON and begin searching for devices. ole: Ths attracting dystonia Nnmesn pris Sodan al its BAT INS Haggarty S fT mutations (57 test)
  3. Once” Pro PKARI8S” appears and the paired device is of your external device, select it.
  4. you are asked for a password, enter “G000″.
  5. A Bluetooth-connected message will be heard and the MODE indicator fights blue steady,
  6. A few seconds later your Bluetooth connection should be ready to use,
  7. Press and hold the SOURCE button to turn off the light up speaker ON/OFF.

PLATING MUSIC FROM AN EXTERNAL BLUETOOTH DEVICE

  1. Follow the “GETTING CONNECTED’ steps above to pair your externa! dev ce.
  2. Tym or the music player program or your external device and set a Ic to play Normally, you can conto music payback with Bill button cn the Bluetooth Speaker.
  3. Audio played through the connected 2luetooth Dewce wl now be heard through Ite speaker.
  4. Adjust the VOLUME to obtain the desired volume level,
  5. Press the POWER button to tum off the uni,

Auxiliary operation
External (auxiliary) audio sources such as tablets smartphones or MP3 players can connect to the
Bluetooth Light up Speaker via aux-in.

  1. Press POWER button to turn the unit ON and then press SOURCE button to select the MODE indicator light blue in flashing (AUX mode),

  2. Sel the volume to the minimum level with the VOLUME knob.
    3. Plugin an AUX IN cable into the ALX IN jack on the top of the un:t

  3. Plug the other end of the cable into the headphone or Line-Out jack of the external source.

  4. Tum on the extemal audio device and set t to play. Tum the extemal audio device’s volume up to 2/3 If necessary, adjust the volume on the main until by turning the VOLUME knob.

Specification

Power Requirement:
DC input : DC 5V === 1A (Micro USB)
Battery: built-in rechargeable lithium battery
Bluetooth: Bluetooth V 5.0 + ED
Support profile A2DP
Audio Power Output: 5 W
Speaker: 8 W 4 Ohms, 5 inch

Trouble Shooting

PROBLEM I POSSIBLE CAUSE FOAMY
GENERAL

No Charging
The USB power adaptor (not included) is not plugged into a wall outlet or the USB cable (included) is not plugged into the mini USB jack on the unit.
Wall outlet is not functioning. Computer USE por is not functioning.| Plug the USB power adaptor (not included) into a wall outlet and plug the USB cable (included) into the mini USB jack on the unit..
Plug another device into the same outlet to confirm the outlet is working.
Make sure your computer power is turned on and try another USB port. Recharge:he unit battery.
Turn the volume knob to increase the sound level.
No Sound| The unit battery is exhausted
Volume set too low| Recline the tot Victory. Turn the Trajano knob 10 nut: reedy sound kW.
| |
BLUETOOTH
No sound when playing audio  via Bluetooth| Your Bluetooth device has been paired with the property.
The unit placement out of range.
The volume control of your Bluetooth device is set at too low.
The volume control of the main unit is set at too low.| Pairing your Bluetooth device according to the “Bluetooth Operation” section.
Relocate the unit within Bluetooth operating range (30 feet).
Increase the volume of your Bluetooth device.
Increase the volume of the main unit to turn to your wish..
AUXILIARY
No sound in AUX mode| Volume at minimum. External device not connected properly.| Adjust the volume knob.
Clear contact pins and connect again.

For service assistance and product information,
Please call: 1-800-968-9853.
Pour obtenir assistance et information appelez:
1-800-968-9853.
Curtis Intemational Ltd.
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3
www.curtisint.com

To make a warranty claim, please [email protected] or call 1-800-968-0653.
90day Warranty

This product i6 warranted to be tree Irom defects in material and workmanship for a period of ninety (90} days from the date of original purchase. During this petiod, your exclusive remedy is repair or replacement of this product or component found to be defective, al our option, however, you are responsible for all costs associated with returnéng the product to us if the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned io us.
This warranty does cover glass, Miers, wear from normal use, use Not in conformity with the printed directions., or damage to the product resulting from accident, alteration,  abuse, of misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, a6 proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified dating on the label (¢.9.. 120V~60r2).

‘We exclude all claims for special, incidental, and consequential damages caused by a breach of express or implied warranty. Al Stability is bruited lo the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty oF condition is limited te the duration of this written warranty. This warranty gives you specific legal Tights. You may have other legal rights  that vary depending on where you live Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply 10 you

For faster service. locale the modet, type, and serial numbers on your appliance.
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please nave the following information available when you contact the Support Team

  • Name, address, and telephone number.
  • Medel number and senal nurnber,
  •  Adair. a detailed description of the problem.
  •  Proof of purchase including dealer or retailer name, address, and date of purchase.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ProScan User Manuals

Related Manuals