Lumens VC-TA50 Auto Tracking PTZ Camera Datasheet
- June 4, 2024
- Lumens
Table of Contents
VC-TA50 Auto Tracking PTZ Camera
Datasheet
Connections
SWITCH Settings
2.1 OUTPUT SWITCH
2.2 IR SELECT
Configure IR SELECT to control 3 cameras using the remote controller
2.3 Camera Address Selector
| Setting | Function Descriptions |
|---|---|
| 0~7 | ID 0~7 |
| 8~9 | Reserved |
2.4 System Switch
| Setting | Function Descriptions |
|---|---|
| DIP 1 | RS-232C/RS-422 selector |
OFF: RS-232C/ON: RS-422
DIP 2| Infrared signal output switch
OFF: Off /ON: On
DIP 3| Communication baud rate selector
OFF: 9600 / ON: 38400
DIP 4| Reserved
Precautions for Installation
- Use the provided DC 12V power cord or a PoE router or hub to supply power via a network cable.
- VC-TA50 supports PoE+ (IEEE802.3at)
2. Tracking distance range: 4m-15m. The optimal tracking distance is 8m.
3. Vertical mounting height: 2m-3m, Optimal installation height: 2.4m.
*
For best tracking results, avoid placing images of people on posters or
screens behind the subject.
Ceiling Installation
-
Please adjust the resolution on SWITCH prior to installation.
(Please refer to) SWITCH Settings -
Fix base plate A to the camera with 4x silver-colored M3 screws.
-
Screw ceiling plate B to the ceiling
*Caution:
(1) This should be undertaken in accordance with guidelines.
(2) Do not obstruct the cable passing thru the hole -
Attach base plate A to the camera base plate B
▼Push base plate A up to the ceiling and slide to the right to latch on to plate B.
▼Secure with 2x M3 silver screws and 1x M3 black screws.
- After the camera is inverted, press the [Mirror] button on the remote control to flip the screen [Flip]
Start Tracking
- Press the remote control to start the auto-tracking function
*Power LED flashes green when the tracking function of the camera is activated
| Items | Button Name | Function |
|---|---|---|
| 1 | Auto Tracking | Enable/Disable Auto Tracking |
| 2 | Full | When the presenter’s full body is framed by the camera |
| 3 | Upper | When the speaker’s torso is framed by the camera |
| 4 | Switch | Force switch to a different presenter |
- For advanced tracking, please download the VC-TA50 User Manual from the Lumens website
Webpage Settings
- Open your web browser and enter the IP address in the address bar.
-
The IP address can be verified on a connected monitor by clicking [MENU] =>[Ethernet] => [IP Address] on the remote control
-
If the camera is not connected to a DHCP router, the default IP address is 192.168.100.150
- Enter the user name and password to view the camera images, control the camera and manage advanced settings.
User Name: admin
Password: 9999
- Enter the user name and password to view the camera images, control the camera and manage advanced settings.
-
Please visit YouTube [My Lumens] channel to watch the related videos for instructions
https://www.youtube.com/c/MyLumens
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>