LUMENS RM-CG Nureva Dual Instruction Manual
- June 1, 2024
- Lumens
Table of Contents
LUMENS RM-CG Nureva Dual
Get Hardware connection
Install & step by Nureva Console client
Install Nureva Console client
- Using Console client for step Nureva DHL300
- Download [Console Client] https://support.nureva.com/97341-download/win-mac-download-nureva-console-client
Setup Nureva Console client
After Nureva Console client setup is completed, launch Console client app and
USB cable connect from Nureva connect module to PC.
Setup Nureva Dual HDL300 integration
A: Drag the vertical scroll bar of the Console client down
B: Scroll down until you see the ‘Integrations’ option
C: Click the down arrow of [Local integrations] 
Setup camera tracking integration
A: Click the scroll bar to enable [Network integration settings] B:
Copy this IP, and we will use it to fill it in [Device IP] of CamConnect Pro
C: Fill the IP of CamConnect Pro and Enter.
Setup camera tracking integration
A: Fill the IP which copy from Nureva Console client [Network integration
settings] B: Press [Apply] button and the toggle [connect] bar to enabled
Nureva default port is 8931. Please confirm the
port is allowed to connect with your PC.
Set angle position setting
Setup angle position setting
Note: “Azimuth Angle” maximum angle range is from -70 to +70 degrees,
which makes 0 degree as its center point.
The schematic diagram above shows a sound source detected in the 0 degree
region.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>