Lumens DC200 LED Work Light User Guide
- June 3, 2024
- Lumens
Table of Contents
Lumens DC200 LED Work Light
Important
Please activate your warranty at https://www.MyLumens.com/reg
Please visit our website https://www.MyLumens.com/en/Page/70 to download
latest version of Software, User Manual and Quick Start Guide.
I/O Interface
| NO. | Item | Function description |
|---|---|---|
| 1. | Power socket | Use the power adapter from enclosed accessories for power |
supply
2.| HDMI Output| Connect the HDMI output equipment
3.| USB Type-B port| Use the USB cable to connect DC200 and the
computer; install Lumens™ software to retrieve images
4.| HDMI Input| Connect the HDMI input signal source
5.| Flash drive slot| Allow the flash drive to plug in and to store
videos and photographs recorded by DC200
Getting Started
- O Place an object to be displayed under the camera.
- Turn the power on .
- Adjust the gooseneck and lens to appropriate position.
- Press the [ AUTO TUNE ] button to optimize the image.
You are ready to teach/ present.
Each time the camera head is moved, press the [ FOCUS ] button to refocus the lens.
Installation & Connection
Connect a Projector, Monitor or HDTV
Connect to a Computer and Use Lumens’ Software
Software can be downloaded from Lumens website.
Connect a Computer, Projector, Monitor or HDTV simultaneously
Connect to an Interactive Whiteboard (IWB)
Press [ SOURCE J button to switch the image source.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>