BubblyNet G4 plus G7 Touchscreen Instruction Manual
- June 3, 2024
- BubblyNet
Table of Contents
BubblyNet G4 plus G7 Touchscreen
G4 + G7 TOUCHSCREEN INSTALLATION INSTRUCTIONS
WARNING – RISK OF FIRE AND ELECTRICAL SHOCK. DEVICE MUST BE INSTALLED BY
A QUALIFIED ELECTRICIAN ONLY. DEVICE IS INTENDED FOR INSTALLATION IN
ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL AND FEDERAL
SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
CUTOUT TABLE
| TOUCHSCREEN | CUTOUT |
|---|---|
| 4” SCREEN | 4.7” X 3.3” |
| 7” SCREEN | 7.125” X 4.725” |
TOUCHSCREEN INSTALLATION
- MAKE A CUT OUT AS PER THE CUTOUT TABLE IN THE WALL USING APPROPRIATE CUTTING TOOL. CUT OUT CAN BE LANDSCAPE OR POTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C AND ETHERNET CABLE THROUGH THE CUT OUT. (FIGURE 1)
- CONNECT THE USB-C AND ETHERNET CABLE TO THE TOUCH SCREEN. USB-C IS FOR POWER AND NECESSARY FOR OPERATION, ETHERNET IS OPTIONAL BUT RECOMMENDED.(FIGURE 2)
- PULL THE SPRINGS BACK ( FIGURE 3)
- INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.(FIGURE 4)
- FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.(FIGURE 5)
WIRING DIAGRAM
INPUT POWER: 5V, 3A, USB-C
- Consult Spec Sheet for full data on voltage range and current compatibility.
For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx
727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions
and specifications at any time without notice. The manufacturer accepts no
liability for consequential damage which is occasioned to the user based on
the data provided.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>