BubblyNet T7 Touchscreen Instruction Manual
- June 3, 2024
- BubblyNet
Table of Contents
BubblyNet T7 Touchscreen
WARNING
RISK OF FIRE AND ELECTRICAL SHOCK. THE DEVICE MUST BE INSTALLED BY A QUALIFIED
ELECTRICIAN ONLY. THE DEVICE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH
THE NATIONAL ELECTRICAL CODE, AND LOCAL AND FEDERAL SPECIFICATIONS. DISCONNECT
POWER AT THE ELECTRICAL PANEL BEFORE SERVICING.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE
CUTOUT TABLE
| TOUCHSCREEN | CUTOUT |
|---|---|
| 4” SCREEN | 4.7” X 3.3” |
| 7” SCREEN | 7.2” X 4.725” |
TOUCHSCREEN INSTALLATION
- MAKE A CUT-OUT AS PER THE CUTOUT TABLE IN THE WALL USING THE APPROPRIATE CUTTING TOOL. CUT OUT CAN BE LANDSCAPE OR PORTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C THROUGH THE CUTOUT. (FIGURE 1)
- CONNECT THE USB-C TO THE TOUCH SCREEN. USB-C IS FOR POWER AND NECESSARY FOR OPERATION.(FIGURE 2)
- PULL THE SPRINGS BACK ( FIGURE 3)
- INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.(FIGURE 4)
- FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.(FIGURE 5)
WIRING DIAGRAM
- INPUT POWER: 5V, 3A, USB-C
- Consult Spec Sheet for full data on voltage range and current compatibility.
For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com.
The manufacturer reserves the right to change or modify the design, dimensions, and specifications at any time without notice. The manufacturer accepts no liability for consequential damage which is occasioned to the user based on the data provided.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>