PlayStation PS5 Disk Edition
- June 14, 2024
- PlayStation
Table of Contents
PlayStation PS5 Disk Edition
How to fix CE-108255-1
An error occurred in the application.
- Make sure your system software and application are updated.
- If the error occurs after launching a game, delete the game from Settings > Storage, and reinstall it.
- Start your PS5 console in Safe Mode and select Rebuild Database.
- If the error occurs again, reset your PS5 console from Settings > System > System Software > Reset Options > Reset Your Console, and try installing the application again. Please back up your data if possible.
For other error code’s troubleshooting please refer to below link: https://www.playstation.com/en-in/support/error-codes/ps5/
Troubleshoot PS5 console disc reading issues
Reinsert the disc into your console after each of these steps.
1. When your PS5TM console is oriented vertically on the console stand, the
labelled side of the disc should face left as you insert it.
-
Clean the disc with a soft, clean cloth to remove any dirt or prints.
-
Try inserting another game, Blu-Ray disc, or DVD. PS5TM consoles can’t play burned discs or audio CDs. 3
-
Access Safe Mode and select Clear Cache and Rebuild Database.
-
If the Rebuild Database option doesn’t resolve the issue, access Safe Mode and select Reset PS5 (Reinstall System Software).
Warning: Selecting Reset PS5 (Reinstall System Software) deletes all information on the console, including the System Software. Visit the guide below to download the reinstallation version of the PS5 console system software.
If these troubleshooting steps don’t fix the issue, please visit PlayStation Repairs.
How to remove a stuck disc from a PS5 console
Before you begin, you need:
- A well-lit room with a table to work on.
- A #1 Phillips or cross-hatch screwdriver.
- A small flashlight (optional).
Note: Don’t turn on or play on your console with the cover off.
- Press and hold the power button for three seconds to turn off your PS5 console, then remove all cables and devices from the console.
- Place the console on a soft cloth on a flat surface and remove the base.
- Position the console so the screw hole for the base is facing you, the PS logo is facedown, and the disc slot is on your left side.
- Place your palms near the top corners and grip the edge of the cover. Gently pull the cover up and toward yourself. You may hear a click. The cover lifts away.
- With the cover removed, look for black rings on the optical drive, including a circle of black plastic film. You can remove this film, or push through it to reach the screw it is covering. (Newer consoles may not have this plastic cover.)
- Using a #1 Phillips or a cross-hatch screwdriver, turn the screw CLOCKWISE until the full disc is almost completely visible.
- Gently remove the disc. Do not forcibly pull the disc from the optical drive.
- Replace the bottom cover by positioning it slightly away (about 2cm or 3/4 inch) from the top edge and sliding it back into place.
- You will hear an audible click when the cover is secured.
- Reconnect all cables and turn on the console.
Check the disc for scratches and dirt
- Clean a scratched or dirty disc using a lint-free cleaning cloth made specifically for cleaning Bluray Discs or DVDs.
- Clean the disc by wiping from the center towards the edge of the disc
References
- PlayStation 5 Error codes | PlayStation Support
- How to troubleshoot PS5 console disc issues
- How to troubleshoot PS5 console disc issues
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>