ALPHA Waterproof Bone Conduction Headphone User Manual
- June 3, 2024
- Alpha
Table of Contents
ALPHA Waterproof Bone Conduction Headphone
Thank you！
Welcome to purchase Alpha Waterproof Bone Conduction Headphone that
manufactured by our company. We do believe that you will enjoy wonderful music
at any time in your daily life.
With advanced technologies and exquisite workmanship, we hope that Alpha
Waterproof Bone Conduction Headphone satisfies you with its superior quality
and functions.
Notice to Users
- Please read this user manual carefully before using the product, so that you could easily and freely operate the headphone. We think that you have already read this manual when using the product.
- Please keep this manual properly for future reference.
- To protect your legitimate rights and interests from infringement, please keep the Warranty Card properly when buying our products and ask for a valid purchase voucher.
- All parts of the product, including accessories, and their related intellectual property rights are owned by our company or the relevant subject authorized by company. Without the permission of the right subject, they can not be copied, extracted or translated.
- As this product involves upgrading or improvement, our company reserves the right to change the software and hardware specifications in this manual at any time without prior notice. The product specifications and information mentioned in this manual are for reference only.
- Although all information has been carefully checked, there are inevitably errors and omissions, and our Company reserves the right of final interpretation.
Safety Notice
Please read the following messages, to ensure you could safely use the product.
- The maintenance of product can only be carried out by professional technicians, please DO NOT disassemble the product by your own.
- To avoid any problems caused by electromagnetic interference or electromagnetic compatibility, please power the product off at places with signs as “ Radio Off ”, such as hospitals, other health care places, and when taking an airplane etc.
- In a vehicle with airbag, DO NOT place the product in the area where the airbag may be deployed.
- Please power the product off before entering into explosive or flammable environment.
- Please DO NOT charge the product in flammable or explosive environment.
- Please power the product off before approaching the blasting area and lightning area
FCC WARNING
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device mustaccept any interference received, including interference that may cause undesired operation.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
- The device has been evaluated to meet general RF exposure requirement.
- This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Unpack Checking
Please carefully open the packaging to confirm if the items are included as listed below in box, please contact your local dealer in time if there is any item lost or damaged.
Accessories
| Parts | Quantity |
|---|---|
| Headphone | 1 |
| Warranty Card | 1 |
| Magnetic Charging/Data Cable | 1 |
| User Manual | 1 |
| Waterproof Earplugs | 1 |
Battery Information
Charging Precautions
If the battery of product runs out or without being used for quite a long
time, please charge the product before using. The battery capacity can be
optimized by charging / discharging for 2-3 cycles. The battery needs to be
charged when the power is low.
Cautions
- Please DO NOT throw the battery into fire.
- While charging the product, please power it off to ensure that the battery can be fully charged.
- Please DO NOT always connect the product with charging cable after the battery is fully charged, continuously charging will shorten the battery life.
- Please DO NOT charge the product with fully charged battery, it may reduce the cycle life of battery.
- Please try to keep the battery in an indoor environment of about 25 ℃. The battery is prone to failure when the temperature is lower than – 10 ℃ for a long time.
- When the temperature is higher than 35 ℃ or lower than – 10 ℃, the discharge capacity of the battery may decrease, which is determined by the physical characteristics of the lithium battery
Battery Charging
- Plug the power adapter of 5V 1000mA into qualified AC power output socket.
- Connect the magnetic charge cable with the charging port of product.
- Red flowing indicator indicates that currently the battery is charged with low power. Yellow flowing indicator indicates that currently the battery is charged with medium power.
- Green breath indicator is on after the battery is charged for around 4 hours. And the indicator is out after 5 minutes, it indicates that the battery is fully charged.
- Disconnect the magnetic charging cable after the indicator is out for 30 minutes to an hour, so the battery reaches the best condition.
- Unplug the power adapter from AC power output socket.
Cautions
- The battery of product is not charged when leaving the factory, please charge the product for the very first use.
- Please power the product off when the battery is being charged.
- When a new battery is charged for the first time or a battery stored for a long time (more than 2 months) is charged for the first time, it should be recharged several times to reach the normal battery capacity. It should be ensured that the battery is charged at least once every three months.
- When the battery is fully charged, please DO NOT charge the battery to avoid affecting battery life and performance.
Product Layout
General Operation
- Power ON / OFF
- Keep pressing the power button for 3 seconds with the product in power off status, it will be powered on and remind the current battery volume.
- Keep pressing the power button for 3 seconds with the product in power on status, it will be powered off.
- Bluetooth Pairing
- With power on status, the LED flashes, indicating that the headphone enters into pairing state and waiting for being paired.
- Activate the Bluetooth seeing function of mobile device, select ” Swonder Alpha “, hear the voice prompt ” Bluetooth connected “, and comes with Blue flow LED performance.
- Switch Bluetooth / Built-in Memory Playing Mode
Double press Power button to switch Bluetooth / Built-in memory playing mode with voice prompt “ Bluetooth Mode ”or “ Built-in Memory Playing Mode ”, audio files downloaded to the headset memory can be played in later mode.
Common Faults & Troubleshooting Methods
| No. | Fault Phenomenon | Fault Reasons and Troubleshooting |
|---|
1
|
Failed to Power On
| A.Run out of power: please connect the power adapter to charge the headphone.
B.Defect of Switch or other problems: please send and repair the headphone to assigned
maintenance station.
C.The battery is in the protection state, please connect the charger to reactivate the battery.
2| Can ot be paired with cellphone| A. Confirm the current mode and try to pair in Bluetooth mode again.
B. Please select memory playing mode when swimming.
C. In public places or other environments with Bluetooth interference, please stay away from the environment before use.
3
|
Failed to use memory playing mode
|
A. Confirm that the current mode is in memory playing mode.
B.Confirm that the audio files have been transferred to product.
C.Confirm whether the audio format is correct ( MP3, WAV, APE, FLAC, AAC, WMA ).
---|---|---