Ditec CIVIK Automation for Sliding Doors Instruction Manual
- June 10, 2024
- Ditec
Table of Contents
- Ditec CIVIK Automation for Sliding Doors
- Product Information: Ditec CIVIK Automation System for Sliding Doors
- Product Usage Instructions
- The beauty of technology
- Installation example
- SPECIFIC ACCESSORIES
- TECHNICAL SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Ditec CIVIK Automation for Sliding Doors
Product Information: Ditec CIVIK Automation System for Sliding Doors
The Ditec CIVIK is an automation system for sliding doors that ensures elegance, versatility, and safety. The product consists of a casing, carriage unit, heads, cover, belt, and anti-panic system. It also includes specific accessories such as proximity sensors, radio receivers, and manual operation built-in sensors. The system has a sleek design with a brushed aluminum cover and is compact due to its 75 mm-high cover. It is versatile and suitable for generic frames, glass, and wood wings. The automation system has PUSH&GO and PULL&CLOSE features, which can be activated by sensors, pushbuttons, or radio command via the Ditec ZEN remote control. The product is safe to use as it has monitoring safety sensors in opening and closing and an internal LED indicating diagnostics and alarms. It also has a LOW ENERGY mode with a wide range of wing weight adjustment.
Technical Specifications
- Stroke control: EL51 (built-in)
- Maximum capacity: 1 motor
- Power supply: 24 Vdc
- Power input: 230 Vac / 50-60 Hz
- Torque / Thrust: 24 Vdc / 1.8 A
- Opening speed: 0 – 30 s
- Certification: Cert. n. 0957/6
Product Usage Instructions
To use the Ditec CIVIK automation system for sliding doors, follow these instructions:
- Ensure that the product is installed correctly with all the necessary components.
- Activate the automation system by using sensors, pushbuttons, or radio command via the Ditec ZEN remote control.
- The system has PUSH&GO and PULL&CLOSE features. Push the door to activate the PUSH&GO feature and pull the door to activate the PULL&CLOSE feature.
- The system has an anti-panic system that ensures safety in case of emergency. The anti-panic system can be activated manually by using the manual operation built-in sensor.
- The product has a LOW ENERGY mode with a wide range of wing weight adjustment. Use this mode to conserve energy.
- The internal LED indicates diagnostics and alarms. In case of any issues, refer to the user manual or contact Ditec Automations for assistance.
The beauty of technology
Quiet and light, but above all elegant: Ditec CIVIK brings together design, technology and practicality, combining a modern, compact design (just 75 mm high) with top performance (80 kg with two wings for a maximum opening width of 1610 mm) guaranteeing safety and compliance with the standards (including safety sensor monitoring, as per EN 16005). Ditec CIVIK is the ideal automation for any type of door frame, from the Ditec PAM series framed wing to the generic one, but it really comes into its own with glass models, perfect for residential and commercial contexts like offices, studios and restaurants.
Installation example
CIVIK WITH GLASS WING AND AC1356 CONNECTION
CIVIK WITH GLASS WING AND TECHNICAL CONNECTION
CIVIK WITH GENERIC FRAME
ELEGANT
- Sleek design
- Compact thanks to its 75 mm-high cover
- Brushed aluminium cover
VERSATILE
- Automation system suitable for generic frames, glass and wood wings
- PUSH&GO and PULL&CLOSE features
- Activation by sensors, pushbuttons or radio command Ditec ZEN remote control)
SAFE
- Monitoring safety sensors in opening and closing
- Internal LED indicating diagnostics and alarms
- LOW ENERGY mode with wide range of wing weight adjustment
SPECIFIC ACCESSORIES
-
PID24
Proximity sensor -
OCL
Radio receiver kit complete with wiring and transmitter -
CIVIKLA
Anti-panic system complete with brackets -
COMGC
Radio controlled programmer with 6 door status selection modes and open-close control, complete with transmitter and receiver -
COMGS
Optional display for COMGC -
CIVIKP
Manual operation built-in sensor -
PFP1
Rectangular elbow pushbutton -
PFP2
Stainless steel rectangular elbow pushbutton
TECHNICAL SPECIFICATIONS
| CIVIK
---|---
Description| electromechanical actuator for interior sliding doors
Stroke control| encoder
Maximum capacity| 60 kg (1 wing)
80 kg (2 wings)
Power supply| 230 Vac / 50-60 Hz
Power input| 0.2 A
Torque / Thrust| 30 N
Opening speed| 0.4 m/s (1 wing)
0.8 m/s (2 wings)
Closing speed| 0.2 m/s (1 wing)
0.4 m/s (2 wings)
Maximum opening width| 1610 mm
Anti-panic system| CIVIK LA
Operating temperature| -20°C / +55°C
Protection rating| IP 20
Product dimensions (H x D x L)| 75 x130 x L mm
Control panel| EL51 (built-in)
MAIN FUNCTIONS OF THE SYSTEM
| EL51
---|---
Description| control panel
for 1 motor 24 Vdc
Mains power supply| 230 Vac / 50-60 Hz
Number of motors| 1
Motor power supply| 24 Vdc / 1.8 A
Accessories power supply| 24 Vdc / 0.36 A
Electrolock| 24 Vdc / 0.5 A
Kinematic management with Encoder|
Obstacle detection
(causes stop when opening or reverse when closing)
|
Push opening (PUSH&GO)|
Pull closing (PULL&CLOSE)|
Open control|
Close control|
Timer-controlled automatic closing| 0 – 30 s
Monitored emergency reverse|
Monitored opening safety function (speed limiting)|
LOW ENERGY mode|
Ditec S.p.A.
Largo U. Boccioni, 1 21040 Origgio (VA) · Italy
Part of ASSA ABLOY
Tel +39 02 963911
Fax +39 02 9650314
info@ditecautomations.com
www.ditecautomations.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>