nVent HOFFMAN AL23SS Junction Box And Wireway Owner’s Manual

nVent HOFFMAN AL23SS Junction Box And Wireway

Specifications

• Brand : HOFFMAN
• Product Type: Fast-operating clamp for Junction Box and Wireway
• Material: Stainless Steel 304
• Finish : Polished
• Catalog Number: AL23SS
• Thickness: 14 ga
• Weight: 0.16 lb

Product Usage Instructions

Installation

1. Identify the standard clamp bracket used on the Junction Box or Wireway where you want to install the fast-operating clamp.
2. Place the fast-operating clamp over the bracket, ensuring it aligns properly with the screw clamps on the box or wireway.
3. Secure the clamp in place using the provided washers. Make sure the clamp is tight and properly positioned.

Usage
The fast-operating clamp is designed to provide quick access to Junction Boxes and Wireways with screw clamps. To open the clamp:

1. Locate the handle of the fast-operating clamp.
2. Operate the handle to release the clamp from the bracket.
3. Safely access the Junction Box or Wireway as needed.

CATALOG NUMBER

AL23SS
Provides quick access to Junction Box and Wireway which have screw clamps. Installs on standard clamp bracket used on Junction Box, Type 12 Trough and Wireway, Type 4X Wireway and similar custom enclosures. Clamps are available in plated steel or stainless steel.

FEATURES

Each kit has one fast-operating clamp and four washers

PRODUCT ATTRIBUTES

• Article Number : 26220
• Material: Stainless Steel 304
• Finish : Polished
• Colour : Unpainted
• Thickness : 14 ga
• Weight : 0.16 lb

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

FAQ

Q: Can I use this clamp on other types of enclosures?
A: The fast-operating clamp is designed to be compatible with standard clamp brackets used on Junction Boxes, Type 12 Trough, Wireway Type 4X, and similar custom enclosures. It may not be suitable for other types of enclosures.

Q: What should I do if the clamp is not tightening properly?
A: If you encounter issues with tightening the clamp, ensure that the clamp is aligned correctly with the screw clamps on the box or wireway. Double-check the placement of washers and make sure they are tightened securely.

Q: Is it necessary to periodically lubricate the fast-operating clamp?
A: It is recommended to periodically inspect the clamp for any signs of wear or corrosion. Lubrication may be beneficial to maintain smooth operation over time, especially in harsh environments.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>