AUDIBAX Tucson 60 User Manual
- June 3, 2024
- AUDIBAX
Table of Contents
Tucson 60
User Manual
Tucson 60
Please read the manual before using the product
| Project model | Tucson 60 |
|---|---|
| speaker unit | 3″ x 4, 2″x 1 |
| Rated power (RMS) | 60W |
| Frequency Range | 140Hz-20kHz |
| Sensitivity (1m, 1W) | 89± 3dB |
| Maximum sound pressure level (1 m) | 107±3dB |
| Product size (HxWxD) | 606x 109x102mm |
| Product packaging size | 725 x 280 x 160mm |
| Product Weight | 4KG |
| Product gross weight | 10KG |
Foreword
Thank you for choosing our products. All our products are strictly tested
before leaving the factory and keep our promise of quality.
The products are widely used in schools, gymnasiums, square venues, parks,
parking lots, railway stations, airports, villas, shopping malls and
supermarkets, and are ideal for public broadcasting.
In order to facilitate your installation, debugging and use of this product,
please read this instruction carefully before installation.
Features
This loudspeaker is made of aluminum alloy shell, and the surface is treated with UV anti-ultraviolet paint. It has a strong texture appearance, and can provide professional-level sound performance, which can meet the needs of demanding places.
- All-weather design, choose waterproof unit, suitable for both indoor and outdoor.
- Small and beautiful appearance, suitable for decoration in various places.
- The combination of 3″ gray polypropylene drum paper full-frequency cone woofer and 2″ tweeter has wide frequency response, clear bass level and clear and bright treble.
- Multi-level adjustable power, with independent adjustment knob, can adapt to the needs of different places.
- Sturdy aluminum alloy box, not easy to deform, not rust
Product information
| model | high | width | deep |
|---|---|---|---|
| Tucson 60 | 606 | 109 | 102 |
| Rated voltage | Tucson 60 |
|---|---|
| 70V | 2W-5W-10W-20W-30W-4Ω |
| 100V | 5W-10W-20W-40W-60W-4Ω |
⑤ Connect the audio broadcast transmission line; adjust the power knob as
needed.
Technical parameter
Install
Stand accessories
-
Divide the mounting bracket into 1, 2, and 3 parts. Install the two hex screws into the mounting slots on the back of the speaker (Horizontal placement of the frets helps to fit the screws）
！ When placing the speaker horizontally, please be careful not to touch or press the front grille of the speaker with the hard surface, otherwise the front grille will be deformed
-
Fix the mounting bracket 1 as shown in the figure, after adjusting the appropriate height according to the installation plan, tighten the screws.
-
According to the installation plan, after drilling holes on the wall, fix the bracket on the wall, and then assemble the installation bracket 1, the installation bracket 2, and the installation bracket 3 as shown in the figure. Make sure the mounting bracket is securely attached. (The screws for fixing the 3 parts of the mounting bracket are provided by yourself).
-
Please adjust the most suitable angle within the adjustable range according to the installation plan, and then tighten the screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>