AUDIBAX Snow 600 User Manual
- June 3, 2024
- AUDIBAX
Table of Contents
AUDIBAX Snow 600
Please read the manual before using the product
Warning
- Read the instruction manual thoroughly prior to using the unit.
- Keep this manual for future reference.
- Keep the packaging so that the unit can be shipped in the original packaging in order to avoid damage.
- For indoor use only.
- Make sure that there is sufficient cooling in the mounting area.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet.
- Keep away from heat and direct sunlight. Make sure that neither liquids nor small objects can enter the unit through the ventilation holes.
- Only clean the unit with a damp, dust-free cloth. Do not use cleaners or solvents!
- Do not use contact spray or cleaning agents to clean the switches and pot meters.
- Repairs have to be carried out by a qualified technician only.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
- Always unplug the unit during a thunderstorm or when it is not in use.
- When you unplug the unit from the mains always pull the plug, never the lead.
- The unit does not contain any user-replaceable parts other than those specified in this manual.
- When you unplug the unit from the mains always pull the plug, never the lead.
- In order to prevent the dropping of the unit, a safety fastening needs to be installed. This can be a solid chain, a steel cable, etc. which has to be fastened separately from the mounting bracket.
- The supplied bracket is the main fixing and must be used to solidly mount the light effect.
- In order to avoid accidents on public premises, local legal requirements and safety regulations/warnings must be fulfilled.
- Keep out of the reach of children.
Introduction
This high-performance 600W snow machine creates a winter nature during any party. The artificial snowflakes whirl meters away and provide a nice atmosphere and an extra dimension e.g. an après-ski atmosphere. Supplied with remote control.
Safety Recommendations
Always connect the snow machine to a wall outlet or an earthed mains lead! Be careful when filling the tank. Unplug the unit from the mains first! Open the tank and fill it by means of a suitable funnel. Do not obstruct the openings on top of the housing in order to ensure proper cooling. Do not place any objects on the snow machine.
Installation and use
Unpack the unit. Fill the tank via a funnel and plug the unit into the main outlet. Switch the compressor motor on by pressing the button on the remote control. The snow machine produces immediately a nice flow of artificial snow at a distance of about 6m.
Location
Place the snow machine at a location where it can be easily filled. The
machine can also be hung via the supplied adjustable bracket.
Switching the unit off
Switch the unit off by unplugging it from the mains
Specifications
- Power supply: 230V~/50Hz
- Power: 600Watts Heat
- Snow volume: ca. 5m3/minute
- Tank capacity: ca 0.9 liters
- Dims: 320×205 x 155mm
- Weight: 3.74 kg