intezze MINI True Wireless Earbuds Instruction Manual

intezze MINI True Wireless Earbuds

SIMPLE OPERATING INSTRUCTIONS

TURNING THE EARPHONES ON/OFF

Before you begin using the earphones, remove the protective film from the charging pins. Both earphones turn on automatically after removal from the charging case. The LED diode on one earphone blinks in alternating red and white. This means that you can pair the earphones with your phone. When you return them to the charging case, they turn off automatically. The earphones can also be turned on manually by pressing the multi-function button for three seconds. The LED lights will blink red. The earphones can be turned on manually. Just press the multifunction button for three seconds. The lights will blink red three times. Turning off automatically – when the earphones disconnect from a device, they turn off after three minutes on their own.

EARPHONE FUNCTIONS

• Volume – Up/Down
• Volume +: Two short presses of the right earphone
• Volume -: Two short presses of the left earphone

Answering a call/Ending a call:

• One short press of either earphone

Rejecting a call:

• One long, 2-second press of either earphone

Play/Pause:

• One short press of either earphone

Next song:

• One long, 2-second press of the right earphone

Previous song:

• One long, 2-second press of the left earphone

WARRANTY

WARRANTY CONDITIONS – THE WARRANTY DOES NOT COVER THE FOLLOWING SITUATIONS:

1. Damage caused by unauthorised tampering with the device.
2. Filters clogged by earwax (may not be immediately visible) or otherwise needing cleaning. Cleaning must be done by an authorised service and a fee is charged.
3. Earbuds with their duct filters removed.
4. Physical damage to the earbuds caused by a fall or impact.
5. Damage caused by force majeure.

CAUTION

1. To enable connection of the charging pins, you must first remove the protective film from the pins on the earbuds.
2. Fully charge the case together with the earbuds prior to first use.
3. If you are not using the earbuds for an extended time,  keep charging the earbuds and case regularly, to avoid damaging the batteries (shortening their lifespan).
4. Keep the volume at the lowest possible level.
5. Listening at loud volumes for an extended time may damage your hearing irreversibly!
6. Children must be supervised by an adult when using the earbuds. Risk of swallowing small parts.
7. Clean using a slightly damp cloth only.
8. Do not use the earbuds outside their supported temperature range of -15°C to +50°C.
9. Do not charge the case or earbuds in places with a temperature below 0°C.
10. Do not expose the earbuds or case to direct sunlight for extended periods.
11. Never disassemble or otherwise try to repair the earbuds.
12. Keep the mesh on both earbuds clean to avoid sound quality degradation.
13. Using headphones in a dusty or humid environment can damage them.

SPECIFICATIONS

• Bluetooth version: 5.0
• Earphone battery capacity: 32 mAh (3.7 V)
• Case battery capacity: 200 mAh (3.7 V)
• Sensitivity: 105 dB ± 3 dB
• Signal range: 10 meters (in ideal conditions with no obstacles)
• Charging connector: Type-C
• Content subject to change
• Complete instructions can be found atwww.intezze.com
• Support Contactinfo@intezze.com

References

• Why wireless TWS headphones | Intezze

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>