Intezze INTZ003D6 Core Sport True Wireless Earbuds User Manual
- June 5, 2024
- Intezze
Table of Contents
Intezze INTZ003D6 Core Sport True Wireless Earbuds User Manual
Intezze INTZ003D6 Core Sport True Wireless Earbuds
-
What’s in the box?
-
Product description
-
Charging
• Remove the protective film from the earbuds when using for the first time.
• Fully charge both earbuds and the charging case before the first-time using.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging!!!
- Charging Case Indicator
If the charging case has totally run out of battery, it will enter into deep-
sleep status, and will not light up until keep charging
for 20 mins to activate the charging case.
The earbuds indicator will automatically turn off when the earbuds fully
charged.
-
How to fit?
1. Identify the left and right earbuds
2. Rotate the earbuds and ajust to find the best angle
3. Make sure the ear tip seals in the ear canal
Badly sealed ear canal reduces the effect of passive soundproofing and can
degrade sound.
-
Power On / Power Off
• Both earbuds will automatically turn on when take them out from charging case (the green LED lights flashing).
• Put the earbuds back to the charging case, earbuds will automatically turn off. -
Pairing your earbuds
• Both earbuds will automatically turn on and enter into pairing mode after
take them out from charge case
• Selet “Intezze CORE” from the list of devices shown
Note:
The earbuds will automatically connect with the device their last paired with
when earbuds are power on.
-
Function
“Volume UP/Down
Volume+: Long press Left earbud.
Volume-:Long press Right earbud.
“Voice-Assistant
Play / Pause
Press either earbud once Next Track double press Right earbud
Previous Track double press Left earbud
-
Heaphone reset
If you fail to build connection between two earbuds, or between two earbuds and your phone, please try the follow steps:
Step 1: Delete the old connection on your device.
Step 2: Power on both earbuds, quick click Left or Right earbuds 5 times when they are in pairing mode.
Step 3: Turn on your smart devices and select Intezze CORE to confirm pairing. -
Parameters
-
Caution
To enable connection of the charging pins, you must first remove the
protective film from the pins on the earbuds. Fully charge the case together
with the earbuds prior to first use.
If you are not using the earbuds for an extended time, keep charging the
earbuds and case regularly, to avoid damaging the batteries (shortening their
lifespan).
Keep the volume at the lowest possible level.
Listening at loud volumes for an extended time may damage your hearing
irreversibly!
Children must be supervised by an adult when using the earbuds. Risk of
swallowing small parts.
Clean using a slightly damp cloth only.
Do not use the earbuds outside their supported temperature range of -15°C to
+50°C.
Do not charge the case or earbuds in places with a temperature below 0°C.
Do not expose the earbuds or case to direct sunlight for extended periods.
Never disassemble or otherwise try to repair the earbuds.
Keep the mesh on both earbuds clean to avoid sound quality degradation.
Put the headphones in the case dry !!!
-
Warranty conditions
The warranty does not cover the following situations:
Damage caused by unauthorised tampering with the device.
Filters clogged by earwax (may not be immediately visible) or otherwise
needing cleaning. Cleaning must be done by an authorised service and a fee is
charged.
Earbuds with their duct filters removed.
Physical damage to the earbuds caused by a fall or impact.
Damage caused by force majeure.
Content subject to change www.intezze.cz / www.intezze.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>