ardo Bellis Electric Breastpump Instruction Manual

ardo Bellis Electric Breastpump

The breast shell size is correct if:

• the nipple moves freely in the funnel and can follow the rhythmic movements of the breastpump.
• no part, or very little, of the areola is in the funnel.
• the milk flows and the breast feels uniformly soft after expression.

Product description

• Ardo Bellis breastpump
• Connection port for pumpset
• Power adapter with USB cable
• Connection opening for USB power adapter

Ardo Bellis is a vacuum pump for collecting breast milk and is intended for use at home and in professional environment. It expresses in two phases (stimulation and expression modes) that imitate the sucking behaviour of the baby.
With Ardo Bellis you can express milk from one breast or both breasts at the same time.
The German text is the reference for the contents.
Instructions for the accessories: Only use Ardo pumpsets. Breast shells are available in the sizes ø 22 / 26 / 28 / 31, and 36 mm (see accompanying instructions for use for “Pumpset and accessories”).

Control elements and symbols

The illustrations of the control elements and symbols are located on the fold- out page of the cover. The active elements or symbols light up.

• On/Off button (standby button) Switches the breastpump on and off
• Memory Plus button Press the Memory Plus button: Saves the expression history of a pumping session. Memory Plus button lights up: Sequence is saved but is not displayed. Memory Plus button flashes: Saved expression history is displayed.
•  Power Pumping button Automatically starts the Power Pumping program (interval pumping over an hour). The different segments light up green (during expressing) or white (during the pauses) depending on the progress of the interval pumping.
• Bluetooth® Shows the connection of the breastpump via Bluetooth
• Battery display Shows the charge level of the rechargeable battery
• Vacuum display Step indicator for vacuum (suction level)
• Cycle display Step indicator for cycle (suction frequency)
• Vacuum buttons Increase or decrease the vacuum (suction level)
• Cycle buttons Increase or decrease the cycle (suction frequency)
• Mode button Displays the current mode and enables manual switching between stimulation and expression modes
•  Stimulation mode Upper semicircle lights up orange in stimulation mode
•  Expression mode Lower semicircle lights up green in expression mode
• Timer Displays the expressing time

Important safety instructions and warnings

Ardo Bellis is an electrically operated reliable medical device. It has been developed and is manufactured according to CE guidelines and the relevant safety standards. For your safety and to prevent damage to the device and to avoid the risk of electric shock, injury, or fire, please follow the safety instructions below.
READ THE INSTRUCTIONS FOR USE COMPLETELY BEFORE USING THIS
BREASTPUMP.
Not following these instructions for use may lead to damage to the device or personal injury.
KEEP THESE INSTRUCTIONS FOR USE.
For help with the initial setup or if something unexpected happens, please contact the point of sale, the hire center, or the customer service team at the manufacturer Ardo medical AG.

Note to the user
Any complaints, problems, or safety concerns should be reported to the manufacturer or the distributor.
In the European Union (according to Regulation (EU) 2017/745 on medical devices) any serious incidents occurring in rela-tion with the product must be reported to the manufacturer and the competent authorities in the Member State in which the user resides.

Risk due to contamination / infection

• To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.
• Only use original Ardo pumpsets. If parts from other manufacturers are used, there is a risk of microbial contamination of parts as well as the breast milk because the parts are not compatible.

Risk of health problems and serious injuries

• This device must not be used during pregnancy because expressing breast milk can start contractions.
• Do not use this device while driving a car (even as a passenger).
• Do not use this breastpump if you are overtired and may fall asleep during use, because this may lead to irritation of the nipples.
• Make sure that this device is not used unsupervised by children or by people with reduced mental capabilities.
  Ardo Bellis may only be used for the purposes described in Chapter 3. For all uses apart from the intended use, all warranty and liability claims against the manufacturer are excluded.

Risk of an electric shock

• The Ardo Bellis breastpump with the power adapter is only suitable for use indoors. Do not use outdoors.
• Only use this breastpump with the supplied Ardo original USB cable and power adapter.
• Ensure that the power adapter can always be easily accessed.
• Ardo Bellis is not waterproof.
  • The device must therefore not be immersed in water or other liquids nor used or stored in locations where it could fall into water.
  • Do not use in the bath or when showering.
  • Do not clean in the dishwasher, under running water, or by immersing in water.
  • The pump unit must not be used if it has fallen into water or is wet. If this happens, contact your service partner or the manufacturer!
• This breastpump must not be opened or modified in any way without the permission of the manufacturer. It does not contain any parts that are maintained by the user.
• Handle this device with care and avoid all shocks, blows, or vibrations (e.g., do not allow it to drop onto the floor). If this device is nevertheless exposed to one of the mechanical effects described above, carefully inspect the device for damage before the next use. If the device is damaged, contact the point of sale, the hire center or the customer service team at Ardo medical AG.

Risk of fire or toxic vapors
Keep the pump unit, USB cable with power adapter, and accessories away from sources of heat.

Risk of damage to the device or an unwanted change in the vacuum
Do not insert or suck up any objects or liquids into the tube connector port of the device.

Risk of injury due to the vacuum generated by the device or strangulation
Make sure that the device is not used unsupervised by children or by people with reduced mental capabilities.

Risk of incorrect mode of operation and reduction of the performance characteristics

• Using this device near other devices or stacked with other devices should be avoided.
• Portable and mobile RF communication equipment (radio devices including their accessories such as antennas and external antennas) should not be used at a distance less than 30 cm (or 12 inches) from the parts and cords of the device labeled by the manufacturer.
• The use of accessories, power adapters, and cords other than those defined or provided by the manufacturer of this device may result in increased electromagnetic noise emissions or a reduced electromagnetic immunity for the device and lead to a faulty mode of operation.

Cybersecurity: The device is protected from piracy and unauthorized use. I If you have any indication of a violation of cybersecurity protection please contact the manufacturer.

Intended use

The Ardo Bellis electric breastpump is used to express and collect breast milk from lactating or, to be more precise, from breastfeeding women by generating a defined vacuum at the breast. It can be used for single or double pumping. The breastpump is intended for use indoors. The Ardo Bellis breastpump is intended for multiple users.

Operation and expressing

You can find more information about operating and using Ardo Bellis at www.ardomedical.com.
If you need additional help, please contact the point of sale, the hire center, or the customer service team at Ardo medical AG or speak to a lactation consultant or midwife.

Terms used

• 2-phase breastpump Ardo Bellis expresses in two phases: the stimulation and the expression modes, which imitate the sucking behavior of the baby. This means a rapid cycle (suction frequency) with low vacuum (suction level) to stimulate the let-down reflex and a high vacuum with a slow cycle for efficient suction.
• Stimulation mode A rapid cycle (suction frequency) and low vacuum (suction level) start the breast milk flowing or trigger the let-down reflex.
• Expression mode Slower cycle (suction frequency) and high comfortable vacuum (suction level) for efficient expressing of breast milk once the let-down reflex has been triggered.
• Cycles Suction frequency / suction speed
• Vacuum Suction level
• Single pumping Expressing from one breast
• Double pumping Expressing from both breasts
• Let-down reflex A reflex that starts the breast milk flowing.
• Memory Plus Saves the personal expression history including settings and time in stimulation and expression mode. When the breastpump is next switched on, the saved expression history starts.
• Power Pumping Interval pumping over one hour to increase the breast milk volume “Vacuum Seal” technology Closed pump system with hygiene barriers in the breast shell itself.

Start-up

WARNING: Risk due to contamination / infection
To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.
You can operate Ardo Bellis with the enclosed USB cable or the integrated rechargeable battery.
Mains operation
Pull the flap down, insert the USB cable into the USB port on the breastpump, and connect the power adapter to the mains power supply.
Battery operation
It is not necessary to fully charge the rechargeable battery before the first use. You can connect Ardo Bellis with the USB power adapter and charge the rechargeable battery during the first five hours of use at the same time (see Chapter 5).

Preparing the Ardo Bellis breastpump

Connecting the pumpset

• Single pumping Attach the tube connec-tor to the Ardo Bellis. The second opening of the tube connector stays closed.

• Double pumping Open the second opening of the tube connector and connect the tube of the second pumpset. Connect the tube connector to the Ardo Bellis.

The use of the pumpset is described in the enclosed instructions for use “Pumpset and accessories”.

Visual inspection before each use
Every time you use the breastpump, check that …
… the USB cable and power adapter are undamaged.
… the pumpset is clean, correctly assembled, and intact.
… the pumpset is correctly connected.

Operation and procedure for expressing

Warning: Risk due to contamination / infection
To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.

Basic functions—step-by-step procedure

1. Find a comfortable position for expressing, hold the pumpset on the breast shell, and center the nipple.

2. Press the On/Off button to start expressing.

3. The breastpump is in stimulation mode.
   This can be seen by the upper segment of the mode button that lights up orange.

4. Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you. The vacuum and the cycle can be increased using the button or decreased using the button. By pressing the particular button, the intensity of the vacuum or cycle is changed by one step or bar.

5. After two minutes, the stimulation mode switches automatically to the expression mode .

6. If the breast milk starts to flow before this, press the mode button to manually switch to the expression mode.

7. If the let-down reflex has not been triggered after the preset two minutes, press the mode button to extend the stimulation by another two minutes.

8. The breastpump is in expression mode. This can be seen by the lower segment of the mode button that lights up green.

9. Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.
   The vacuum and the cycle can be increased using the button or decreased using the button. By pressing the particular button, the intensity of the vacuum or cycle is changed by one step or bar. Expressing is most successful if you select the vacuum and cycle settings that are comfortable for you.

10. The timer starts automatically when the Ardo Bellis is switched on and continuously displays the expressing time.

11. Massage the breast while expressing. This increases the volume of milk expressed.

12. By holding down the On/Off button , you can switch off the breastpump.

Silent Start
If the Ardo Bellis is switched on but not connected to a pumpset, it runs very quietly without pumping.
When the pumpset is inserted, you can start to express (see Chapter 4.4).

Memory function—Individual expressing at the touch of a button

You have found your ideal settings when your breast milk flows freely and you can express most successfully. Activating the memory button saves your expression history. When you next switch the breastpump on, you can automatically express using the saved expression history in the stimulation mode and then in expression mode. The Ardo Bellis breastpump stops automatically after the saved time. You can nevertheless change the values for the vacuum and cycle manually at any time and define a new time for the length of the expression history. This takes you out of save mode. When you have finished expressing, you can save any changes to the expression history. If you do not save the new values, the previous settings are kept.
Whenever the Memory Plus button is lit up, your expression history is saved and when the breastpump is switched on, it automatically starts to express using your personal data.
Using the Memory Plus function—step-by-step procedure

1. Expressing
   Express using your favorite settings.

2. Saving an expression history
   At the end of your expressing session, press the Memory Plus button to save your individual expression history.

3. Accessing your expression history
   Switch the breastpump on. You express straightaway using the saved data. The Memory Plus button slowly throughout.

Deleting data
You can delete the saved data at any time if you do not want to express with the memory function. By holding down the Memory Plus button once, the saved data is deleted and the button no longer lights up.

Power Pumping—Increasing the milk volume

Automatic Power Pumping is a pre-defined one-hour interval pumping program— expressing three times with two pauses—that aims to increase the volume of milk you produce. During the pauses you can remove the pumpset and move around freely.
The operation corresponds to the basic functions (see Chapter 4.4.1). The progress of the expressing is indicated by the green and white segments that light up. Power Pumping imitates the natural sucking behavior of babies. There are times—usually in the evenings—when newborns or older babies want to be breastfed at 10-minute intervals to stimulate milk production (cluster feeding). More information can be found in Chapter 7.4.
Using the Power Pumping function—step-by-step procedure

• Expressing
  Switch the breastpump on and press the Power Pumping button.

• First expressing phase
  The first segment of the button starts to light up green and the breastpump starts in stimulation mode. You can adjust the vacuum and the cycle to what is comfortable for you. After two minutes, Ardo Bellis switches to the expression mode. Again, you can select the vacuum and cycle that work for you. The color of the mode button tells you which mode the breastpump is in.

• First pause
  After 20 minutes a tone sounds and the first 10 minute pause starts. The second segment of the button lights up white. At the end of the pause, a reminder signal sounds.
  You then have 5 minutes to press the Power Pumping button and continue expressing (during this time, the segments flash and a regular beep sounds). Otherwise, the breastpump switches off.

• Second expressing phase
  Ardo Bellis expresses for 10 minutes. The settings for vacuum and cycle from the first expressing phase are used automatically. However, you can adjust these values at any time to suit your needs.

• Second pause
  After 10 minutes a tone sounds and the second pause starts (see first pause for the sequence).

• Third expressing phase
  The settings for vacuum and cycle from the second expressing phase are used. However, you can adjust these values at any time to suit your needs. After 10 minutes the Power Pumping stops and Ardo Bellis switches off automatically.

The time indicator counts down the specified time in each phase.

Battery operation

• The breastpump has a built-in rechargeable battery. The battery cannot be replaced. The rechargeable battery is automatically charged when the supplied power adapter is connected to the mains power. The charging time is
  about 2 hours.

• If the device is operated while the battery is charging, the charging time is extended. Only use the power adapter and the USB cable that are supplied with the breastpump.

• It is not necessary to fully charge the rechargeable battery before the first use. The device can be operated with mains power and the rechargeable battery will be charged at the same time during the first 5 hours of use.

• You can express about 8 times with a fully charged battery.

• Air travel: The Ardo Bellis has a lithium ion rechargeable battery. Please check if there are national restrictions on carrying lithium ion batteries when flying.

Charging the rechargeable battery
Insert the USB power adapter into the breastpump and connect it to the mains power.
When charging, the indicator moves from left to right until the battery is fully charged and the three bars light up white.
If the last bar of the battery symbol lights up red, the breastpump needs to be recharged soon.

Cleaning / maintenance

• Cleaning at home
  Disconnect the breastpump from the mains power before cleaning. Wipe the device as needed with a damp cloth and normal dishwashing liquid. Please follow the safety instructions in Chapter 2.

• Cleaning the pumpset
  The cleaning instructions for the pumpset are described in the enclosed instructions for use for the “Pumpset and accessories”.

• Reprocessing at the hire center
  More detailed information is included in the service instructions.

Useful tips for expressing

Triggering the let-down reflex

The let-down reflex may occur later when expressing than when breastfeeding. The following measures may help the breast milk to flow in addition to the stimulation mode:

• Relax and think about your baby.
• Look at a video or photo of your baby.
• Massage the breast before expressing.
• Extend the stimulation mode (see Chapter 4.4.1).
• Place a warm compress on the breast before expressing.

Comfortable settings for vacuum and cycle

What determines the level of the vacuum is your personal well-being and not the maximum vacuum that can be set. Therefore, express using your comfortable vacuum setting. This will help you to express more breast milk, your breast milk will flow better, and your nipples will remain intact.

Combination of massage and expressing

When you massage the breast while using the breastpump, this can increase your milk production and improve the milk flow.

Increasing the milk volume—Power Pumping

Use the unique automatic Power Pumping function of the Ardo Bellis over one hour (see Chapter 4.6) in addition to your usual breastfeeding or expressing routine.

• Express from both breasts at the same time if possible. Double pumping increases the milk volume.
• Use the special bra for double pumping or take an old bra and cut out a hole for the breast shells.
• Use the 10 minute pauses to relax, drink a little, eat something, have a shower, read a book, listen to some music, do small chores around the house, and so on.
• Use the Power Pumping 1–2 times a day.
•  It may be that in the first few days you can only express a few drops. Don’t worry about this and persevere with the Power Pumping. By regularly stimulating your breasts, the milk volume will increase. It may take 3–4 days or even longer until the volume of breast milk increases.
• The expressed breast milk only has to be placed in the refrigerator at the end of the Power Pumping.

Pain when expressing

Expressing must not be painful. If it hurts, the following possible reasons must be eliminated:

• The vacuum is set too high. Adjust the settings so that they are comfortable for you (see Chapter 7.2).
• The nipples are not centered. Ensure that your nipples are in the middle of the breast shell.
• The funnel of the breast shell does not fit. It is too small or too big. The breast shell size is right if:
  • your nipples move freely in the funnel when expressing and track the rhythmical movements of the breastpump (about 3 mm space between the funnel and the nipple).
  •  none or only a little bit of the areola is located in the funnel.
  • the breast milk flows and the breast feels soft all over after the expressing.
• The breastpump with the pumpset is switched on before positioning the breast shell. As a result, the nipple is difficult to center.

Order the correct size breast shell from Ardo, your specialist retailer, or your qualified consultant. Ardo has the following breast shell sizes in stock: ø 22 / 26 / 28 / 31, and 36 mm (see fold-out page).

Troubleshooting

The breastpump barely sucks or does not suck at all

• Ensure that the pumpset has been correctly assembled and is not damaged (see instructions for use for the “Pumpset and accessories“).
• Check that the pumpset is connected firmly to the breastpump.
• Check whether the USB cable and the power adapter are correctly attached and connected to the mains power.

If these steps do not resolve the problem, please contact the point of sale, the hire center, or the customer service team at the manufacturer Ardo medical AG.

Spare parts

• Ardo Bellis breastpump (body) Art. no. 63.00.521
• USB cable with power adapter EU Art. no. 63.00.541
• USB cable with power adapter UK Art. no. 63.00.542
• USB cable with power adapter US Art. no. 63.00.543
• USB cable with power adapter AU Art. no. 63.00.544
• USB cable with power adapter CN Art. no. 63.00.545
• USB cable with power adapter KR Art. no. 63.00.546
• Pumpset See instructions for use for the “Pumpset and accessories”

Warranty

The warranty period for the Ardo Bellis breastpump is 1 year after the purchase date; the receipt with the date is considered to be the certificate of warranty. The warranty period for the lithium ion rechargeable battery for the Ardo Bellis is 6 months after the purchase date; the receipt with the date is considered to be the certificate of warranty.

General terms and conditions

Ardo medical AG guarantees that the products manufactured by it are free from material and manufacturing defects. With proper use, any faulty material will be replaced free of charge during the warranty period. To preserve the right to make any warranty claims and to ensure the flawless function of the device, the instructions for use must be followed
and only accessories from Ardo medical AG are to be used. The warranty coverage will be void if modifications are made in or to the device.

Technical information / symbols

Pump unit

• Pump unit
• Vacuum pump type moderate vacuum, low flow rate
• Vacuum range at 0–2000 MAMSL 30–330 mbar
• Weight 620 g
• Battery capacity 2600 mAh
• Dimensions 210 × 150 × 90 mm
• Protection class Class II
• Applied part Class BF
• BLE radio frequency band 2.4 GHz ISM
• IP protection class IP 22 (protected against solid objects up to 12 mm and protection against dripping water when the housing is tilted at up to 15°)
• Life time of device incl. power adapter 800 hours
• Operating conditions +5°C to +40°C 10% to 93% RH 700–1060 hPa
• Storage and transport conditions -10°C to +60°C 10% to 93% RH 700–1060 hPa
• Power adapter
• Input voltage 100–240 V, 50/60 Hz, max. 0.5 A
• Output voltage 5 V / 2.0 A (*2.1 A)
• Max. cable length 1.5 m
• IP protection class IPX0 (no protection against solid objects or water)
• Approved models EU: MKC-0502000VEUU (#99.05.025)
• EU: XY-0030A (#99.05.025)*
• UK: MKC-0502000VUKU (#99.05.026)
• UK: XY-0030AUK (#99.05.026)*
• US: MKC-0502000VU (#99.05.027)
• US: XY-0030A (#99.05.027)*
• AU: MKC-0502000VAUU (#99.05.028)
• AU: XY-0030AAU (#99.05.028)*
• CN: MKC-0502000XXX (#99.05.029)
• CN: XY-0030ACN (#99.05.029)*
• KR: MKC-0502000XXX (#99.05.030)
• KR: XY-0030AKC (#99.05.030)*

Disposal

The device can be returned to the manufacturer or be dismantled and recycled in an environmentally responsible manner by a recycling company specializing in electric devices. There are no special or increased risk factors. Waste must be disposed of in compliance with local regulations.

Electromagnetic compatibility

The Ardo Bellis breastpump meets all the relevant requirements for the applicable standards relating to interference emissions and immunity for operation in medical and domestic environments.
More information about the electromagnetic tests is provided in the chapter “Emission and Immunity Tests” (page 93).

References

• Ardo products for breastfeeding, pregnancy and childbirth

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>