Intezze EGO 2 TWS EARPHONES User Manual
- June 7, 2024
- Intezze
Table of Contents
Intezze EGO 2 TWS EARPHONES User Manual
Earphone description
ON/OFF
ATTENTION! Fully charge the earphones together with the case prior to first use.
- The earphones automatically switch on after removing them from the case and switch off after inserting them back.
- You can switch the earphones on manually by holding the touch area for approx. 5 seconds (switch off by holding for approx. 5 s).
- The earphones will switch off automatically if they are not connected to any device for 5 minutes.
Pairing
Prior to the first use with every device, it is necessary to pair the earphones. Pairing does not have to be performed again and the earphones automatically try to connect to any previously paired devices within range.
- Remove both earphones from the case and wait for about 3 seconds before pairing mode is activated.
- Select “Intezze EGO 2” from the available BT devices on your phone and select connect (if necessary, confirm the intention to pair the earphones).
Operation
Charging
Charging the earphones
After inserting the earphones into the case, automatic charging is activated.
The case must be sufficiently charged or connected to the charger.
Charging the case
Use the supplied USB-C cable to charge the case. Fully charge the earphones
together with the case prior to first use.
Pairing one earphone (MONO)
In order to listen with only one earphone, pair both earphones with the phone first. Then insert both earphones back into the case and remove only the earphone that you want to use. Only one earphone will connect automatically
RESET function
If the earphones fail to connect/only one of the earphones is functional, you can reset them using the reset function:
- Delete “Intezze EGO 2” from the list of paired devices on the phone.
- Remove both earphones from the case and switch them off by holding the touch areas for approx. 5 seconds.
- Activate the RESET function by holding the touch areas for approx. 10 seconds. Successful reset is confirmed by the LED indicator lights, which quickly flash red 3 times on both earphones.
- Now switch on the earphones again and repeat the pairing process with the phone.
LED indication on the case
Case charge status (after inserting the earphones):
Warning
- Fully charge the case together with the earphones prior to first use.
- If you do not use the earphones for a longer period, charge them together with the case approx. once a month so that the battery life is not shortened.
- Keep the set volume at the lowest possible level. Listening to loud volumes for an extended period may damage your hearing irreversibly!
- Children must be supervised by an adult when using the earphones. Risk of swallowing small parts.
- Do not expose the earphones to water for extended periods. The earphones are not designed for swimming, showering, or diving.
- Using the earphones in a very dusty or humid environment may result in damage to the earphones.
- Do not use the earphones out of the allowed temperature range of -15 °C to +40 °C.
- Do not charge the case or earphones in places with a temperature lower than 0 °C.
- Do not expose the earphones or case to direct sunlight for extended periods.
- Never disassemble or otherwise repair the earphones yourself.
- Only use a slightly damp cloth to clean the earphones.
- Keep the earphone grille clean on both earphones in order to avoid sound degradation.
Warranty conditions
The warranty does not cover the following types of defects:
- Damage caused by tampering with the device.
- Filters clogged by earwax (may not be properly visible) or otherwise dirty. Cleaning must be performed by an authorised service provider and is charged.
- Earphones with the earphone duct filters removed.
- Physical damage to the headphones caused by a fall or impact.
- Damage caused by force majeure.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>