digitech SL-3515 Rechargeable LED PAR Light User Manual

: June 5, 2024
: Digitech

Table of Contents

Box Contents:
Product Diagram:
Operation:
Remote Control:
Safety:
Specifications:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SL-3515 Rechargeable LED PAR Light
User Manual

Box Contents:

1 x Rechargeable LED PAR Light
1 x Infrared Remote Control
1 x USB to DC Charging Cable

Product Diagram:

#	Feature:	Description:
1.	Infrared Port	Used to operate the infrared remote control
2.	LEDs	6 x 1.5W red, green and blue (RGB) LEDs
3.	Mode/Power Switch (Rear)	Select between sound-activated mode, automatic

Operation:

It is suggested to charge the product before use; connect the DC plug of the USB cable to the rear DC power socket of the LED PAR Light.
Connect the opposite end of the USB cable to a suitable SVDC USB mains power adaptor or a USB port of a computer or power bank to start charging the product.
You can use the internal rechargeable battery or connect the light to a USB for it to be powered permanently.
Press the rear mode/power switch to either automatic which will start Automatic mode or sound which is sound activation and will flash to the sound of the music you’re playing.
You can also operate the LED PAR light by using the included infrared remote control to change the colors, modes, or speed.

Remote Control:

digitech SL 3515 Rechargeable LED PAR Light - Remote
Control

Safety:

Do not open the case of the party light to avoid damage and injury.
Keep the party light away from high temperatures as it may cause damage to the unit
Do not expose the party light to water or liquids to prevent the unit from being damaged.
WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN, as the remote control contains Lithium button cell batteries which may be harmful.
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus.
If you suspect your child has swallowed or inserted a button battery. immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764-766 (New Zealand) for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured, e.g. that the mechanical fastener is tightened. Do not use it if the compartment is not secure.
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

Specifications:

LED: 6 x 1.5W (RGB)
Run Time: 3-6 Hours
Charge Time: 3-4 Hours
Battery: 3.7V Li-ion, 2200mAh
Power: 5VDC, 500mA
Dimensions: 160(H) x 150(W) x 70(D)mm

WARNING! KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN

If swallowed a lithium button battery may lead to serious or fatal injury in as little as 2 hours, due to chemical burns and potential perforation of the esophagus.
Non-lithium button batteries battery can cause serious injuries if it is swallowed or placed inside any part of the body.
All button batteries must be kept away from children regardless if they are new or used.
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
If your child is having difficulty breathing contact 000 (Australia) or 111 (New Zealand).
Dispose of used button batteries immediately and safely out of the reach of children. A battery can still be dangerous even when it can no longer operate the device.
As soon as you have finished using a button battery, put sticky tape around both sides of it. This will make it harder for children to swallow the button battery and avoid the risk of the battery catching fire.
Immediately dispose of button batteries immediately out of reach of children, or recycle using a child-resistant container and take used cells to your local battery collection center.

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.electusdlstrtbutlon.com.au