intezze INZGOANCBK GO ANC Noise Cancelling Headphones User Manual

intezze INZGOANCBK GO ANC Noise Cancelling Headphones

Headphone description

1. ANC ON/OFF
2. AMBIENT ON/OFF
3. Battery charge status
4. USB-C charging port
5. Volume +, Next track
6. Multifunction button (MFB)
7. Volume -, Previous track
8. Audio cable input

ON/OFF

ATTENTION! Fully charge the headphones prior to first use.
To turn on the headphones, press and hold the multifunction button (MFB) for approx. 3 seconds. Follow the same procedure to turn off the headphones.

Pairing

It is necessary to pair the headphones with every device you want to use them with prior to first using the device. Pairing does not have to be performed again and the headphones automatically try to connect to any previously paired devices within range.

1. With the headphones switched off, press and hold the multifunction button for approx. 5 seconds, until the LED indicator light flashes red and blue alternately.
2. Select “Intezze ANC” from the available BT devices on your phone and select Connect (if necessary, confirm pairing as well).

Operation

Function: ANC ON /OFF
Command: Move the ANC switch to the ON/OFF position

Function: Ambient ON /OFF
Command : With ANC switched on, press the Ambient button (L) once

• ON/OFF Press and hold the MFB for approx. 2-3 seconds (R)
• Play/Pause Press the MFB quickly
• Answer a call Press the MFB quickly
• Reject a call Press the MFB twice quickly
• Call the last number Press the MFB twice quickly
• Volume UP Press and hold the Volume + button
• Volume DOWN Press and hold the Volume – button
• Next track Press the Volume + button quickly
• Previous track Press the Volume – button quickly

Charging

If the battery charge is less than 10 %, the LED indicator light starts flashing red and a beep sound can be heard in the headphones every 5 minutes. Charge the headphones with the supplied USB cable using a phone charger (faster) or using a powered USB port on another device (slower).

Headphone charge LED indicator

Pairing history deletion

To delete the pairing history, press and hold the MFB of the switched off headphones until the LED indicator turns purple for 2 seconds.

Ear presence sensor

The headphones are equipped with an ear presence sensor. As soon as you remove the headphones from your head, the music is paused automatically. When you put the headphones on again, the music is resumed again automatically.

ANC

ANC – active noise cancellation – is used to increase the comfort of listening in a noisy environment. Activate the ANC switch on the left earphone.

Ambient function

The ambient function allows you to hear ambient sounds better without having to take the headphones off your head. With ANC switched on, quickly press the Ambient button on the left earphone. The volume of ambient sounds is increased immediately (station announcements, paying at a cash register).

Multipoint pairing

To be able to listen to music from your laptop and handle any incoming calls on your phone with the headphones, you can pair the headphones with two devices at the same time. To pair the headphones with two devices, use the following procedure:

1. Pair the headphones with device A by following the instructions in the chapter on pairing.
2. Deactivate the Bluetooth function of device A and switch the headphones to pairing mode again (by pressing and holding the MFB of the switched off headphones for approx. 5 seconds – LED indicator light will start flashing red and blue).
3. Pair the headphones with device B by following the instructions in the chapter on pairing.
4. Switch on the Bluetooth function of device A again and confirm the headphone connection on the device again.

The headphones will be connected to devices A and B simultaneously. Switching between them is automatic (according to active playback or an incoming call).

Warning

1. Fully charge the headphones prior to first use.
2. We recommend that you switch off the headphones before inserting them into the case to prevent accidental activation of some functions.
3. If you do not use the headphones for a long time, charge them regularly to avoid damaging the batteries (shortening their service life).
4. Keep the set volume at the lowest possible level. Listening to loud volumes for an extended period may damage your hearing irreversibly!
5. Do not expose the headphones to water. Only use a slightly damp cloth to clean them.
6. Using the headphones in a very dusty or humid environment may result in damage to the headphones.
7. Do not use the headphones out of the allowed temperature range of -15 °C to +50 °C.
8. Do not charge the headphones in places with a temperature lower than 0 °C.
9. Do not leave the headphones in direct sunlight for a prolonged period of time.
10. Never disassemble or otherwise repair the headphones yourself. There is a risk of damage.

Warranty conditions

The warranty does not cover the following types of defects:

1. Damage caused by tampering with the device.
2. Physical damage to the headphones caused by a fall or impact.
3. Damage caused by force majeure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>