MISURA 1080 24 Inch Office Monitor User Manual
- August 26, 2024
- MISURA
Table of Contents
MISURA MONITOR 24″ FLAT
USER MANUAL ENGLISH
Model: P23GW24DFI01B – 75 Hz
GENERAL INFORMATION
Dear Customer,
Thank you for having purchased this product. This document describes how to
install and use the LED backlit LCD color monitor. Read this manual which
contains information for correct, safe use. Keep this manual at hand so that
you can refer to it when needed.
Product description and type of use.
The LED backlit LCD color monitor presents a very rugged structure. It is
designed for continuous operation and can be used in closed circuit TV systems
without risk of excessive fatigue. The Flat Panel Display has an active
matrix, thin-film transistor (TFT), liquid crystal display (LCD).
General features
- DC 12V Power Input
- Display area
- Wall mounting VESA standard 100 × 100 mm (Not included bracket)
- DP Input video input Interface
- HDMI Input video input Interface
- USB-C Input video input Interface
- Audio Input Interface
- Multilingual OSD menu for easy setting and optimization of the display
Opening the box
Check that the packing and the contents are not visibly damaged. Contact the
reseller immediately if parts are either missing or damaged. Do not attempt to
use the device in this case. Send the product back in its original packing if
it is damaged.
Contents of the box
- Monitor
- Power Adapter
- HDMI cable
- User’s manual
- Table stand
Important Note: Accessories may be changed without prior notice.
WARNINGS
Power
- Only use the power unit provided to power the device. Check mains rating before plugging the power unit in.
- Do not pull the cable to unplug the device.
Safety precautions
- Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have it inspected by qualified personnel.
- Never open the device. In all cases, contact the qualified personnel or authorized service center for repairs.
- Keep the device away from children, to prevent accidental damage.
- Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
- Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the device is used in such conditions. Contact the reseller or your installer.
- It is advisable to disconnect the power wire if the monitor is not used for an extended period.
Installation precautions
-
To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the casing. Ensure at least 5 cm of free space when installing inside a rack.
For the same reason, do not install near sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas subject to excessive dust, mechanical vibrations or shocks. -
Do not arrange this device onan unstable surface, such as a tottering or slanted table.
-
The device could fall causinginjury or mechanical failures.
-
Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water onto the device: risk of fire, electrocution or mechanical failure.
-
Stop using the device if water or other material should penetrate inside: risk of fire and electrocution. Contact the retailer or authorized installer.
-
Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
-
Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or increase internal temperature causing faults.
-
Do not cover the device with a cloth while it is running to prevent deforming the external casing and overheating the internal parts: risk of fire, electrocution and mechanical failure.
-
Keep magnets and magnetized objects away from the device to prevent faults.
-
Do not use the device in the presence of smoke, vapor, humidity, dust or intense vibrations.
-
Wait for a while before operating a device immediately after transporting it from a cold place to a warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to the new ambient temperature and/or humidity, etc.
-
The monitor is provided with a plastic base and rubber feet. It can be positioned on a horizontal surface, such as a desk or a table. Make sure that the device is fastened firmly and that it is not resting on unstable supports or surfaces. Dropping could cause severe injury and damage the device.
-
Remember to adjust the brightness and contrast to obtain a perfect image.
-
The monitor can also be installed on the wallby means of a bracket (not provided).
1.3.4 Cleaning the device
- Rub delicately with a dry cloth to remove dust and dirt.
- Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
- Do not use volatile liquids (such petrol, alcohol, solvents, etc.) or chemically treated cloths to clean the device to prevent deformation, deterioration or scratches to the paint finish.
1.3.5 Privacy and copyright
- The monitor is a device for CCTV systems. Recording of images is subject to the laws in force in your country. Recording of images protected by copyright is forbidden.
- Product users shall be responsible for checking and respecting all local rules and regulations concerning monitoring and recording video signals. The manufacturer SHALL NOT BE LIABLE for use of this product not in compliance with the laws in force.
MONITOR INPUTS
- HDMI port: Used to connect a compatible device.
- DP: Used to connect a compatible DP device
- USB-C: Used to connect a compatible device.
- Audio Out: The Audio Out Input Source
- DC input port: Connect the supplied power supply to power the monitor
MONITOR CONTROL BUTTONS
| 1 | M | Open the Main OSD Menu and Select submenu |
|---|---|---|
| 2 | E | Select signal source or Exit OSD |
| 3 | Go Up on the Main OSD Menu Increase the value of a selected iteml | |
| 4 | Go Down on the Main OSD Menu Decrease the value of a selected item | |
| 5 | **** | Turn the monitor on or Of f |
OSD MENU CONTROLS
Luminance
| Option | Function | Value |
|---|---|---|
| Brightness | It allows changing of image brightness, according to ambient | |
| light. | 0~100 | |
| Contrast | It allows changing of contrast between white and black areas of the | |
| image. | 0~100 | |
| Low Blue | It allows changing of image low blue, according to ambient light. |
0~100
Eco Mode| Energy Saving Mode| Standard/Internet/
Game/Movie
DCR| It means Dynamic Contras Ratio, provide enhanced contrast and sharpness|
ON/OFF
Over drive| It means Over drive, provide enhanced contrast and sharpness|
ON/OFF
Image Setup
| Option | Function | Value |
|---|---|---|
| Image Ratio | Adjust the aspect ratio | Auto/Wide/4:3 |
| Flicker Free | Set the Flicker Free Mode | ON/OFF |
Color Setup
| Option | Function | Value |
|---|---|---|
| Color Temp | Adjust color temperature | User/Cool/ |
Normal/Warm
OSD Setup
| Option | Function | Value |
|---|---|---|
| Language | Set the language of the OSD menu | English, Chinese etc. |
| H.positon | Move the menu position horizontally | 0 ~100 |
| V.positon | Move the menu position vertically | 0 ~100 |
| Timeout | Adjust the standing time of the menu | 5~100 |
| Transparency | Adjust the transparency of the menu | 0 ~100 |
Reset
| Option | Function | Value |
|---|---|---|
| Reset | Restore the factory settings |
Extra
| Option | Function | Value |
|---|---|---|
| Input Select | Select Input HDMI and VGA | |
| Osd Mute | Restore the factory settings | ON / OFF |
| Volume | Allows adjustment of the volume of themonitor from | 0~100 |
| FreeSync | Allows FreeSync to be turned | ON / OFF |
| HDR | Allows HDR to be turned | ON / OFF |
TECHNICAL SPECIFICATION
| Model | P23GW24DF101B -75 Hz |
|---|---|
| Size | 24″ |
| LCD | Panel Type |
| Pixel Pitch | 0.2745 (H) • 0.2745 (V) mm |
| Brightness (Max) | 250 cd/m2 |
| Contrast Ratio | 3000:1 (Typ.) |
| Display Color | 16.7 Million Colors |
| Viewing Angle | 178° (H) /178° N) |
| Response Time | 4 ms (with OD) |
| Resolution | 1920.1080 |
| Case Type | Black Plastic |
| Aspect Ratio | 16:09 |
| INTERFACE | HDMII/DP1/USB-C1 |
| Safety & EMC Certification | CE / FCC / RoHS |
| Electrical Ratings | 12V DC, 4A (AC 100-240V, 50/60 Hz) |
| Power Consumption | Typical 18W |
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Important Note: The specification may be changed without prior notice.
Open the English manual from here
URL: www.misura.shop/advisor/manualy-ke-stazeni-office-monitor-24-75-hz- flatp23gw24dfi01b
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>