PANDUIT CVPDUB 4-Post Rack PDU Mounting Bracket Installation Guide
- June 17, 2024
- PANDUIT
Table of Contents
4-POST RACK PDU MOUNTING BRACKET
Part Number(s): CVPDUB, CVPDUBWH
© Panduit Corp. 2023
INSTALLATION INSTRUCTIONS
V00028DT_04
CVPDUB 4-Post Rack PDU Mounting Bracket
Power Distribution Unit (PDU) Mounting Bracket Locations for Typical Tool- less Mounting Button Spacing
Power Distribution Unit (PDU) Mounting Bracket Locations
Note location of #12-24 positioning screw in each spacing scenario. Install
the positioning screw first to help locate the bracket in the correct location
and orientation relative to the cabinet frame. See page 3 for bracket and
screw installation instructions.
Power Distribution Unit (PDU) Mounting Bracket Installation
Use two (2) #12-24 trilobular screws to mount each CVPDUB bracket to rack.
Tighten screws to 45 in-lb (+/- 5 in-lb). Refer to Pages 1 and 2 for hole and
slot orientation. Install buttons of Power Distribution Unit (PDU) into CVPDUB
bracket as shown.
Power Distribution Unit (PDU) Mounting Bracket Installation (non-typical
button spacing)
If PDU does not employ typical button spacing, mount top bracket first to
locate PDU. Mount lower bracket in appropriate position utilizing bonus holes.
For Instructions in Local Languages
and Technical Support:
www.panduit.com
www.panduit.com
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>