cossiga LSCM2 Linear Series Ceramic Heated Glass Owner’s Manual
- September 17, 2024
- cossiga
Table of Contents
LSCM LINEAR SERIES CERAMIC HEATED GLASS
CM
LSCM2, LSCM3, LSCM4, LSCM5, LSCM6
LSCM2 Linear Series Ceramic Heated Glass
- Ceramic Heated Glass
- Overhead Halogen Lamps with adjustable dimmer
- Digital thermostatic controller
- Heat indicating LED lights
CABINET DIMENSIONS & SPECIFICATIONS
MODEL| CABINET| WEIGHT| BENCH TOP CUT OUT HOLE SIZE| TEMP RANGE| DISPLAY AREA|
FREQUENCY| OPERATING CURRENT WITH LAMPS| OPERATING CURRENT NO LAMPS| POWER
WITH LAMPS| CONNECTION ELECTRICAL POWER CORD 3000MM| VOLTAGE| PACKED FOR
SHIPPING
---|---|---|---|---|---|---|---|---|---|---|---|---
| LENGTH [MM]| DEPTH [MM]| HEIGHT [MM]| KG| | DEG C| M2| | AMPS| AMPS| KW230V|
NZ/AUS/UK| | LENGTH [MM]| DEPTH [MM]| HEIGHT [MM]| WEIGHT [KG]
LSCM2| 805| 690| 555| 65| 775×672| 75-95| 0.33| 50/60 HZ| 7.9| 5.2| 1.9| 10
AMP 3 PIN PLUG (UK 13 AMP)| 220-240V| 910| 770| 410| 76
LSCM3| 1145| 690| 555| 65| 1115×672| 75-95| 0.51| 50/60 HZ| 11.7| 7.61| 2.691|
15 AMP LEAD ONLY| 220-240V| 1250| 770| 410| 88
LSCM4| 1485| 690| 555| 85| 1455×672| 75-95| 0.68| 50/60 HZ| 15.7| 10.25|
3.611| 20 AMP LEAD ONLY| 220-240V| 1590| 770| 410| 107
LSCM5| 1825| 690| 555| 97| 1795×672| 75-95| 0.86| 50/60 HZ| 19.6| 12.78|
4.508| 20 AMP LEAD ONLY| 220-240V| 1930| 770| 410| 128
LSCM6| 2165| 690| 555| 109| 2135×672| 75-95| 1.04| 50/60 HZ| 23.5| 15.32|
5.405| 30 AMP LEAD ONLY| 220-240V| 2270| 770| 410| 140
LSSC1| 570| 365| 1.5| 18| 545 x 338| 75-95| | 50/60 HZ| | 2.52| 0.579| 10 AMP
3 PIN PLUG| 220-240V| 680| 420| 165| 20
CM LSSC1
- Single ceramic heated glass
- Digital thermostatic controller
- Heat indicating LED lights on panel
- Flush mount drop in module
ELECTRICAL POWER
Electrical power cord 3000mm 1 phase connection required.
Unit can be hard wired to isolation switch or fitted with suitable heavy duty
plug such as PDL 56 series or Commando style plug.
PANEL CONTROLLERS
MODEL
| NUMBER OF PANELS| NUMBER OF CONTROLLERS|
GROUP OF PANELS CONTROLLED
---|---|---|---
LSCM2| 2| 1| CONTROLLER 1 – 2
LSCM3| 3| 1| CONTROLLER 1 – 3
LSCM4| 4| 2| CONTROLLER 1 – 2
CONTROLLER 2 – 2
LSCM5| 5| 2| CONTROLLER 1 – 2
CONTROLLER 2 – 3
LSCM6| 6| 2| CONTROLLER 1 – 3
CONTROLLER 2 – 3
ASSEMBLY REQUIRED
GLASS CANOPY OPTIONS GLFT Flat Top
GLFS Full Square Glass
FLUSH BENCH TOP DETAIL
Counter top joinery must be of sufficient structural capacity to take the weight of the LS unit when the flange detail has been made. Drop into base
LS HEATED CERAMIC RISER
| MODEL | CODE |
|---|---|
| LSCM3 RISER | F93-197 |
| LSCM4 RISER | F93-198 |
| LSCM5 RISER | F93-199 |
| LSCM6 RISER | F93-200 |
Stainless Steel Construction Fits all LSCM units Intergrated Digital Controller Adjustable feet
SILICONE ELEMENT REPLACEMENT
The element is accessible through the base of the unit.
Ensure to leave space to allow access for service on the under side of the
unit. If no access is achievable the unit will need to be lifted out.
Locations to avoid
- Drafts from doorways
- Airflow from air-conditioning ducts
- Hot air from motors i.e. refrigerators
- Direct sunlight
Disrupted air flow Heat from other equipment and natural conditions, such
as direct sunlight straight on units, can cause cooling to fail and overload
compressor
Mechanical air flows, such as diffusers and fans can disturb the air curtain
on units causing failure
Date Modified: 17/07/24 Check website for latest version
Download C.A.D models or contact us onCOSSIGA.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>