HYUNDAI PR 650 BTDAB Bluetooth 5.0 Radio Receiver Instruction Manual

June 3, 2024
HYUNDAI

HYUNDAI PR 650 BTDAB Bluetooth 5.0 Radio Receiver Instruction Manual

Thank you for buying our product.Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.

SAFETY INSTRUCTIONS

  • Heed all warnings on the product and in the instruction manual.

  • For your safety, read and follow this manual carefully to ensure proper use of the product and avoid any danger or physical damage.

  • CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER.
    NO USER-SERVICEABLE PARTS INSIDE REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • Heed all warnings – on the product and in the user guide

  • Do not use this apparatus near water or moisture

  • Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture is present.

  • Only use attachments/accessories specified by the manufacturer.

  • Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to this product.

  • Refer all servicing to qualified service personnel

  • To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords or integral convenience receptacles.

  • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

  • No naked flame sources, such as lighted candles, should be placed on the apparatus

  • Keep the appliance away from rain and any moisture. Do not place the unit in moist and humid conditions, which could lead to malfunction.

  • When the unit is suddenly moved from a cold environment to a warm one, if moisture forms inside it, it may not operate properly. To correct this problem, wait about one hour for the moisture to evaporate.

  • Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damaging the unit.

  • The apparatus should be used in moderate climate.

  • Ensure a minimum distance of 0.1 meters around the apparatus for sufficient ventilations.

  • The apparatus shall not be exposed to dripping or splashing, no objects filled with liquids, such as vases, shall be placed on the apparatus.

  • Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage. Refer all servicing to qualified service personnel.

  • Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    A) If liquid has been spilled, or objects have fallen into the product; if the product has been exposed to rain or water.
    B) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment may result in damage and will often require extensive work by a qualified  technician to restore the product to its normal operation.

  • Use suitable power sources- Plug the product into a suitable power source, as described in the operating instructions or as marked on the product.

CHARGING YOUR DAB

Connect the micro-USB cable to the micro-USB port on. Connect the other end of the micro-USB cable to a power outlet, using a USB power adapter. You can also charge the battery by connecting your Move to a computer‘s USB port. The icon on the display shows the battery charging.

PRODUCT OVERVIEW AND CONTROL BUTTONS

PRODUCT OVERVIEW

1. Volume -/+ 8. LCD Display
2. MENU / INFO Button 9. Speaker
3. POWER Button 10. SELECT / ENTER / SNOOZE Button

VOLUME -/+
4. PRESET Button|
5. TU+ Button| 11. Phones out Jack
6. SOURCE Button| 12. AUX input
7. TU- Button| 13. Micro USB 5V/1A DC input

UNDERSTANDING THE CONTROL FUNCTIONS – QUICK SETUP

  1. Turn radio on by pressing the POWER button .
  2. The first time the radio is switched on, it will start up in DAB mode. It will automatically scan for the available radio stations.
  3. In DAB mode, the TU+/- button allows you to navigate between different stations.
    Push SELECT/ENTER to choose the one you want to listen to.

FEATURES – DISPLAY SOURCE MENU

Press the SOURCE button to display the ‘Source’ menu.

DAB Radio Listen to a digital radio station.
FM Radio Listen to an FM radio station.
BT Listening to a Bluetooth device
AUX Listen to content from a device connected to your Aux in connection.

CHANGING THE INFORMATION SHOWN ON SCREEN

When listening to a digital or FM radio station, you can change the information that is displayed on the screen.

Digital radio
When listening to digital radio, press the INFO dial to toggle the information displayed on screen between Scrolling text, Programme type, Ensemble, Channel / frequency, Signal strength / error, Bitrate or Date.

FM radio
When listening to FM radio, press the INFO dial to toggle the information displayed on the screen between ‘Scrolling text’, ‘Programme type’, ‘Frequency’ and ‘Date’.

POWER button
Press POWER Button Turn on the DAB Digital Radio. The first time the DAB Digital Radio is switched, it will start up DAB mode. It will automatically scan for the available radio stations.

LISTENING TO DIGITAL OR FM RADIO

Changing digital DAB stations

  • Press the SOURCE button to select “DAB“. The first time you select DAB radio, DAB will perform an autotune to find all available stations and will tune into one when finished.

  • Press the TU+/- button to display the station list.

  • Press the TU+/- button or turn the SELECT dial to choose the station.

  • Press the SELECT/ENTER button to confirm.

Changing FM stations

Seek tuning

  • Press the SOURCE button to select “FM“.
  • Press the and hold TU+/- button to tune next/previous FM radio station that has a strong signal.
  • Press the and hold SELECT/ENTER to launch auto scanning FM radio stations.

USING RADIO PRESETS

You can store up to 30 digital radio and 30 FM radio stations for quick access.

To store a station to the preset list:

Tune to the digital or FM radio station you want to store. Hold the PRESET button to view the numerical list of stored presets, then turn and press the SELECT dial to choose any Preset number between 1 and 30. You can overwrite existing presets

To recall a preset when listening to digital radio or FM radio

Press the PRESET button, turn the Select dial right or left to scroll through the list of presets, then push and release the SELECT dial to tune to the selected preset.

DAB SETTINGS

Note: You can only see the DAB settings when you have selected ‘DAB’ as the radio source.

Full scan
You can use the ‘Full Scan’ (auto tune) function to automatically scan for new digital radio stations and remove inactive ones. To carry out an auto tune:
Press the hold SELECT/ENTER button. The number of stations found will be displayed during the auto tune. When the auto tune has finished, the last station that you were listening to. If the last station  you were listening to is no longer available, will tune into the first station in the alphabetical list.

Manual tuning
To manually check the signal strength of a known channel:

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to choose ‘Manual tune’.
  • Turn and press the SELECT dial to choose the chann

DRC- Dynamic range control

Dynamic Range Control (DRC) is used to make quieter sounds in a digital radio broadcast easier to hear at low volume or in a noisy environment. Check with the broadcasters to find out if they use DRC.
To change the DRC settings:
Press and hold the MENU button to view the main menu. Turn and press the SELECT dial to choose ‘DRC’. Turn and press the SELECT dial to choose between one of the following options:

  • DRC high: Applies maximum compression to the DRC level.
  • DRC low: Applies reduced compression to the DRC level.
  • DRC off: Removes DRC compression.

FM RADIO SETTINGS

Note: You can only see the FM radio settings when you have selected ‘FM’ as the radio source.

FM scan
You can choose whether automatically stops at the next available FM station or the next available FM station with a strong signal when scanning for an FM station. To change the FM scan setting:

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to choose ‘Scan Setting’.
  • Select between ‘Strong Stations Only’ or ‘All Stations’

USING THE AUX INPUT

You can use the aux input play any music from your phone or tablet. Connect the line out or headphone socket of your auxiliary device to the Aux In socket using a suitable cable.
Selecting the Aux input: Press the SOURCE button to select “AUX“. On your auxiliary device, start to play the content that you selected on your auxiliary device.

USING THE BLUETOOTH

You can use Bluetooth to wirelessly connect to a device, such as a mobile phone or tablet. You can then stream music from your mobile phone or tablet through. The first time you connect a Bluetooth device, you need to pair them. After you‘ve paired a device , remembers it for the next time.

Listening to a Bluetooth device

  • Press the SOURCE button to select “BT“ (Bluetooth).
  • On your Bluetooth device switch Bluetooth on, find PR 650 BTDAB and connect.
  • Select your favorite song, tap the PLAY Button on your Bluetooth device or the ENTER button on the device to play or pause the song from your Bluetooth device.
  • Press the or Button to select the Next or Previous track.
  • If you want to pair (link) the device with another Bluetooth device, press and hold the SOURCE Button a few seconds. The device will go into Pairing/Discoverable mode.
    Note: For more information, see your Bluetooth device‘s user manual. If you are asked to enter a passcode, enter 0000.

Disconnecting a Bluetooth device

To disconnect a Bluetooth device, do one of the following:
Press SOURCE to switch to digital radio or FM radio. Switch off Bluetooth on the connected device.

SETTING ALARMS AND TIMERS

Setting an alarm

  • Press and hold the MENU button to view the main menu.

  • Turn and press the SELECT dial to select ‘System’ > ‘Alarm’.

  • From the ‘Alarm’ menu, turn and press the SELECT dial to select either ‘Alarm 1’ or ‘Alarm 2’.

  • Select ‘ON time’ by turning and pressing the SELECT dial, turn the dial to adjust the hours and

  • minutes, pressing SELECT to confirm each section.

  • Turn and press the SELECT dial to select ‘Duration’. Turn and press the SELECT to set the duration that the alarm will sound in minutes.

  • Turn and press the SELECT dial to select ‘Source’. Turn and press the SELECT dial to choose between ‘Buzzer’, ‘DAB’ or ‘FM’, then press the SELECT dial to confirm.

  • If you’ve chosen ‘DAB’ or ‘FM’ radio, turn and press the SELECT dial to select ‘Preset’. To play the station you last listened to, turn and press the SELECT dial to select ‘Last listened’ or turn and press the SELECT dial to choose a radio station from the preset list.
    Note: Skip this step if you are setting a Tone alarm.

  • Turn and press the SELECT dial to select ‘Cycle’. Turn and press the SELECT dial to choose between ‘Once’, ‘Daily’, ‘Weekends’ or ‘Weekdays’, then press the SELECT dial to confirm.

  • Turn and press the SELECT dial to select ‘Volume’. Turn and press the SELECT the dial to set the volume of the alarm.

  • Press SELECT to turn ‘Alarm’ to ‘On’.

Snoozing a sounding alarm

To snooze a sounding alarm, press the SELECT dial. The display will show a countdown timer to show and the alarm will re-start again after 9 minutes on each press. To cancel a snoozing alarm press the POWER button.

Setting the sleep timer

Press and hold the MENU button and turn and press the SELECT dial to select ‘System’. Turn and press the SELECT dial to select ‘Sleep’. Turn and press the SELECT dial to adjust the length of the sleep timer.

Cancelling a sounding alarm

Press POWER button to cancel any sounding alarm or press SOURCE to cancel and leave the radio on.

Time and date settings

The clock will automatically set itself using your digital or FM radio signal. If the time or date does not update automatically, you can manually set it using this option.

Note: Any time or date updates received by a digital broadcast will override manual settings.

Setting the time and date manually:

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to select ‘System’ > ‘Time’.
  • Turn and press the SELECT dial to choose ‘Set Time/Date’.
  • Turn and press the SELECT dial to set the hour. Repeat to adjust the minutes.
  • Turn and press the SELECT dial to set the day of the month. Repeat to set the month and year.

Note: If you set the 12-hour time format, make sure that you select the ‘AM’ or ‘PM’ version of the hour before pressing the Select dial.

Time and date synchronization options

You can synchronize the time and date on the FM or digital radio signal.

To specify the clock synchronization options:

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECTdial to select ‘System’ > ‘Time’.
  • Turn and press the SELECT dial to choose ‘Auto update’.
  • Turn and press the SELECTdial to choose between the ‘update from Any’, ‘update from DAB’, ‘update from FM’ and ‘No Update’ clock synchronization options.

Changing the time format

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to select ‘System’ > ‘Time.
  • Turn and press the SELECT dial to choose ‘Set 12/24 hour’.
  • Turn and press the SELECT dial to choose between ‘12’ or ‘24’ hours.

Changing the date format

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to select ‘System’ > ‘Time’.
  • Turn and press the SELECT dial to choose ‘Set date format’.
  • Turn and press the SELECT dial to choose between ‘DD-MM YYYY’ and ‘MM-DD-YYYY’

SYSTEM SETTINGS

Changing your preferred language

You can select the language for menus and options.

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to choose ‘System’ > ‘Language’.
  • Turn and press the SELECT dial to select a menu language.

Backlight

You can adjust the duration that the screen is illuminated for and the brightness of the screen.

Timeout
To adjust the duration of the screen backlight before dimming:

  • Press and hold the MENU button to view the main menu
  • Turn and press the SELECT dial to choose ‘System’ > ‘Backlight’.
  • Turn and press the SELECT dial to choose ‘Timeout’.
  • Turn and press the SELECT dial to choose a timeout setting. To specify that the backlight should
  • always remain on, choose ‘On’.

On level

  • Press and hold the MENU button to view the main menu
  • Turn and press the SELECT dial to choose ‘System’ > ‘Backlight’.
  • Turn and press the SELECT dial to choose ‘On Level’.
  • Turn and press the SELECT dial to choose between ‘High’, ‘Medium’ or ‘Low’.

Dim level

  • Press and hold the MENU button to view the main menu.
  • Turn and press the SELECT dial to choose ‘System’ > ‘Backlight’.
  • Turn and press the SELECT dial to choose ‘Dim Level’.
  • Turn and press the SELECT dial to choose between ‘High’, ‘Medium’, ‘Low’.

Carrying out a factory reset

Resetting removes all presets, stored stations, alarms and resets all other options to default settings.

  • Press and hold the MENU button to view the main menu…
  • Turn and press the SELECT dial to choose ‘System’ > ‘Factory Reset’.
  • Turn and press the SELECT dial to select ‘Yes’ to reset factory settings. Select ‘No’ if you do not want to reset to factory settings.

SPECIFICATIONS

Tuner Range: DAB/Band III 174 – 240 MHz, FM: 87,5 – 108 MHz
Bluetooth Frequency range: 2402 – 2480 MHz, maximum power: 3,33 dBm (EIRP)
Power supply: Micro-USB power socket 5V DC (1A)
Battery: 3,7 V / 2000 mAh
Battery Charging Time: 4 hours
Battery Playback Time: 14 hours (60 % Volume)
Number of preset radio stations 30 DAB presets, 30 FM presets
Amplifier Rated Output Power: 1,2 W (RMS)
Dimensions: 165 x 95 x 49 mm
Weight: 350 g

We reserve the right to change technical specifications.

WARRANTY

Our product is warranted for 2 full year from the date of purchase. The warranty is provided on all material defects and workmanship. Guarantee of 24 months does not apply to decrease in the accumulator’s effective capacity caused by its use or age. Effective capacity gradually decreases depending on the method of use of the accumulator.

WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER.
ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.

TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

Disposal of old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Hereby, ETA a.s. declares that the radio equipment type PR 650 BTDAB is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www .hyundai-electronics.cz/declaration_of_conformity

Licensed by Hyundai Corporation Holdings, Korea
Imported by ETA a. s., náměstí Práce 2523, 760 01 Zlín, CZ

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals