ICI FMX 400 SERIES Infrared Cameras User Guide

: June 3, 2024
: ICI

Table of Contents

ICI FMX 400 SERIES Infrared Cameras
Package Includes
Set Up
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ICI FMX 400 SERIES Infrared Cameras

ICI-FMX-400-SERIES-Infrared-Cameras-PRODACT-IMG

THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE SPECIFICATIONS OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE MANUFACTURER ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT ANY PRELIMINARY OPINION THE TECHNICAL SPECIFICATIONS OF THE PRODUCT. THIS MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE PROVIDED “AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI REPRESENTATIVE FOR A COPY. IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Package Includes

ICI-FMX-400-SERIES-Infrared-Cameras-
FIG-1

ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE PRESENT BEFORE BEGINNING INSTALLATION

Set Up

Mount the FMX Series device to a tripod using the ¼-20 mount.

MAKE SURE TRIPODS DO NOT BLOCK THE DIRECT PATH OF PERSON(S) TO BE IMAGED TO ENSURE THE EQUIPMENT WILL NOT BE MOVED OR KNOCKED DOWN. USING A DIVIDING BARRIER WILL HELP KEEP TRIPODS SEPARATE FROM THE PATH. ENSURE THE CAMERA LENS AND TEMPERATURE REFERENCE SOURCE ARE FACING EACH OTHER ON PARALLEL PLANES. MAKE SURE CAMERA TARGET AREA IS FACING A NON-REFLECTIVE BACKGROUND.

Plug Ethernet cable into the Ethernet port of the FMX Series device.
Plug the other end of the Ethernet cable into the Ethernet port of the computer.
Attach coaxial cable to back of the FMX Series device.
Plug jack end of power adapter into barrel end of coaxial cable.
Plug power adapter into a 110/120V electrical outlet.
Power on Devices.

ALLOW AT LEAST 10 MINUTES FOR THE DEVICE TO ACCLIMATE. THIS WILL PROVIDE THE MOST ACCURATE TEMPERATURE MEASUREMENTS.

Software

Software arrives installed on computers and tablets purchased from ICI as complete systems and it will launch automatically on startup. A copy of the software is provided on the Software USB Drive. Documentation can be found online on the IR Flash Pro web page under the Downloads section or at this address:

https://infraredcameras.com/ir-flash-pro-manual/

Recommended System Requirements

Processor: i5 Quad Core or above
RAM: 4 GB or above
OS: Windows 8/8.1/10
Hard Drive: 256 GB or above
Resolution: 1920 x 1080

Use the following steps if installing IR Flash Pro on a user computer

Install IR Flash software using the software USB drive. Refer to the IR Flash User Manual for instructions.
Once installed, launch IR Flash software by double-clicking the associated desktop icon.

ABOUT ICI / CONTACT

Infrared Cameras, Inc. 2105 W. Cardinal Dr. Beaumont, TX 77705 Phone: 409-861-0788 | Toll Free: 866-861-0788 | International: 409-861-0788 General Inquiry: support@infraredcameras.com Website: www.infraredcameras.com

You may reach a representative by phone or email Mon – Fri 8:00AM – 5:00PM CST. ICI manufactures complete systems and software. We can provide complete engineering, software, and OEM solutions. Our Fortune 500 clients rely on us for infrared equipment and thermography training (which we offer through the Infrared Training Institute). In addition to providing custom germanium, silica, and sapphire optics, we also build windows for enclosures, as well as custom pan and tilt units. We can even provide customizable explosion-proof systems. Our knowledge and experience stems from years of using infrared imaging and temperature measurement instruments to provide solutions to: managers, engineers, scientists, inspectors and operators in space, power companies, medical, pulp and paper, food industry, research and development, and various process industries. You can see our products and services used in industrial, commercial, and government applications worldwide. Originally named Texas Infrared (still DBA), Infrared Cameras, Inc. has been in business since March, 1995. Thank you for your dedicated and continued support.