SIGNATURE HARDWARE 440646 3-Light 23.9-Inch Black Bronze Outdoor Wall Light Owner’s Manual
- June 10, 2024
- Signature Hardware
Table of Contents
440646 3-Light 23.9-Inch Black Bronze Outdoor Wall Light
CARDIGAN
SKU: 440646
Product Information
The CARDIGAN is an electric fixture that requires professional installation. Signature Hardware recommends consulting a professional if you are unfamiliar with installing electric fixtures. The product comes with mounting hardware, wire connector, cage, tube, top cover, and screws for installation. The fixture has black and white wires for connection and a ground wire for grounding (if your outlet has a ground wire). It is important to observe all local plumbing and building codes during installation. The product has a warranty, and customers can contact Signature Hardware’s Customer Relations team for any inquiries.
Product Usage Instructions
- Before starting the installation process, unpack and inspect the product for any shipping damage. If there is any damage, contact Signature Hardware’s Customer Relations team through live chat or by emailing support@signaturehardware.com.
- Gather all the required materials needed for installation, including the wire connector, mounting hardware, cage, tube, top cover, and screws.
- Assemble the top cover (A) to the cage (F) using screws (B).
- Connect the black wire from the fixture to the supplied wire. Connect the white wire from the fixture to the white (neutral) house wire. Ensure that all wire nuts are secured, and wrap the connections with electrical tape if needed. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box.
- Attach the cage (F) to the tube (E), and secure it with screws (D).
If you still have any questions, you can check out Signature Hardware’s Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
electric fixtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, counter top, or for personal injury during
installation.
Observe all local plumbing and building codes. Unpack and inspect the product
for shipping damage. If any damage is found, contact our Customer Relations
team via live chat at www.signaturehard-ware.com or by emailing support@siganturehard-ware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
FOR YOUR SAFETY
WARNING: Be sure the electricity to the wires you are working on is shut off, either the fuse is removed or the circuit breaker is shut off. You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully, if you are unclear as to how to proceed, consult a qualified electrician.
TOOLS AND MATERIALS
INSTALLATION
-
Shut off the power at the circuit breaker and remove old fixture,
-
Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
-
Assemble the Top Cover (A) to the Cage (F) with screws (B).
-
CONNECTING THE WIRES
Connect the black wire from the fixture to the supplied wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box. -
Attach the Cage (F) to the Tube (E), and secure with Screws (D).
1.855.715.1800
signaturehardware.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>