SmartAVI HDR-4X4 Plus V2 Matrix Switch User Guide
- June 14, 2024
- SmartAVI
Table of Contents
SmartAVI HDR-4X4 Plus V2 Matrix Switch
Technical Specification
- Video Amplifier Bandwidth: 1.65 Gbps
- Input Video Signal: 1.2 volts
- Input DDC Signal: 5 volts
- Max Resolution: 3840×2160 (4K)
- HDMI Connector: HDMI Type A 19 pin female
- Control: Direct IR
- DB9: 4 buttons and DIP switch
- Remote control: Female RS232 or RS422 @ 9600bps
- Power Requirements: 12V
- Power Connector: 2.1mm DC jack (center +ve)
- Dimensions: 7.1 W x 1.1 H x 2.8 D
- Weight: 4.05 lbs
What’s in the Box
| PART NO. | DESCRIPTION | Q-TY |
|---|---|---|
| HDR-4X4 Plus V2 | HDMI 4×4 Router | 1 |
| Remote Control | 1 | |
| 12V Power Adapter | 1 | |
| Quick Start Guide | 1 |
About
The HDR-4X4 Plus V2 is a 4 Port 4K 30Hz HDMI Matrix Switch that works with HD- DVD players, TiVo systems, PCs, and satellite set-top boxes that connect to an HDMI display. The main function of a matrix switcher is to allow any 4 inputs to be routed to any 4 outputs; or the same input to be routed to all outputs, or any combination.
Features
Switches multiple 4K HDMI video and digital audio signals from any four sources to four HD displays
Hardware Installation
- Turn off all input devices and displays.
- Connect male to male HDMI cables to the input devices or sources and the IN ports on the HDR-4X4 Plus V2. Connect the displays to the OUT ports on the HDR-4X4 Plus V2.
- Power on the input devices and the displays.
- Connect the power cord and power on the HDR-4X4 Plus V2.
Note : Each input and output can support up to 12V. Do not connect extenders that are powered by HDMI.
Frequently Asked Questions (FAQ)
-
Q: What is the maximum video resolution supported by the HDR-4X4 Plus V2?
A: The maximum resolution supported is 3840×2160 (4K). -
Q: How many inputs and outputs does the HDR-4X4 Plus V2 have?
A: The HDR-4X4 Plus V2 has 4 inputs and 4 outputs. -
Q: Can I connect the HDR-4X4 Plus V2 to a Blu-Ray player?
A: Yes, you can connect the HDR-4X4 Plus V2 to a Blu-Ray player using HDMI cables. -
Q: What power requirements does the HDR-4X4 Plus V2 have?
A: The HDR-4X4 Plus V2 requires a 12V power source. -
Q: Can I use extenders powered by HDMI with the HDR-4X4 Plus V2?
A: No, do not connect extenders that are powered by HDMI to the HDR-4X4 Plus V2.
WHAT’S IN THE BOX
| PART NO. | Q-TY | DESCRIPTION |
|---|---|---|
| HDR-4X4 Plus V2 | 1 | HDMI 4×4 Router |
| Remote Control | 1 | |
| 12V | 1 | Power Adapter |
| Quick Start Guide | 1 |
NOTICE
- The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose.
- SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
- No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.
TECHNICAL SPECIFICATION
VIDEO
Video Amplifier Bandwidth| 1.65 Gbps
Input Video Signal| 1.2 volts
Input DDC Signal| 5 volts
Max Resolution| 3840×2160 (4K)
HDMI Connector| HDMI Type A 19 pin female
CONTROL
Direct| 4 buttons and DIP switch
IR| Remote control
DB9| Female RS232 or RS422 @ 9600bps
OTHER
Power Requirements| 12V
Power Connector| 2.1mm DC jack (center +ve)
Dimensions| 7.1” W x 1.1” H x 2.8“ D
Weight| 4.05 lbs
ABOUT
The HDR-4X4 Plus V2 works with HD-DVD players, TiVo systems, PCs, and
satellite set top boxes that connect to an HDMI display. The main function of
a matrix switcher is to allow any 4 inputs to be routed to any 4 outputs; or
the same input to be routed to all outputs, or any combination.
FEATURES
- 4×4 non-blocking, single-link HDMI matrix switch
- Switch offer any inputs and any outputs for HDMI sources
- Distributes any of the four inputs to any or any combination of the four HDMI output displays
- Maintains high resolution video up to 3840×2160 (4K)
- Supports IR remote
- Serial RS-232 remote port
- Individual push button for switching HDMI source to each display
- Comes with easy to use SmartControl software
- HDMI 1.3 compatible
- HDCP compliant
HARDWARE INSTALLATION
- Turn off all input devices and displays.
- Connect male to male HDMI cables to the input devices or sources and the “IN” ports on the HDR-4X4 Plus V2.
- Connect the displays to the “OUT” ports on the HDR-4X4 Plus V2.
- Power on the input devices and the displays.
- Connect the power cord and power-on the HDR-4X4 Plus V2.
Note : Each input and output can support up to 12V. Do not connect
extenders that are powered by HDMI.
HDR-4X4 Plus V2 FRONT
HDR-4X4 V2 Plus BACK
SWITCHES MULTIPLE 4K HDMI VIDEO AND DIGITAL AUDIO SIGNALS FROM ANY FOUR
SOURCES TO FOUR HD DISPLAYS
800.AVI.2131, 702.800.0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV
89032
SmartAVI.com