RAB RDLED2S8-40N-TB 8 Watt LED 2 Inch Remodeler Square Downlight Owner’s Manual

: June 3, 2024
: RAB

RAB RDLED2S8-40N-TB 8 Watt LED 2 Inch Remodeler Square Downlight

Color: Black trim
Weight: 1.3 lbs

Project: ………………………………….
Type: ………………………………………….
Prepared By: ……………………………………..
Date: …………………………………………

Driver Info

Type Constant Current
120V 0.08A
208V N/A
240V N/A
277V N/A
Input Watts 8.3WC

LED Info

Watts: 8W
Color Temp: 4000K (Neutral)
Color Accuracy: 83 CRI
L70 Lifespan: 50,000 Hours
Lumens: 722
Efficacy: 87 lm/W

Technical Specifications

Compliance

UL Listed: Suitable for wet locations in a covered ceiling

IESNA LM79 & LM-80 Testing: RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.

Construction

IC Rated: Suitable for direct contact with insulation
Trim Component: This component can be ordered with New Construction housing in order to make a complete fixture.
- See here for New Construction Housing
Maximum Ambient Temperature: Suitable for use in up to 40°C (104°F)
Cold Weather Starting: Minimum starting temperature is -40°C (-40°F)
Lens: Nanostructure lens eliminates “hot spots”, and helps provide smooth, uniform light and higher efficiency
Junction Box: Integral junction box with wiring capacity for Min 60°C supply conductors End of Run
Housing: Specification-grade, die-cast aluminum construction

Installation

Torsion springs easily install into ceiling collar (remodeler) or rough-in (new construction)

Trim Ring: Black powder coated die cast 1/2″ trim ring
Green Technology: Mercury and UV free. RoHS-compliant components.
Finish: Our environmentally friendly polyester powder coatings are formulated for high-durability and longlasting color

Performance

Lifespan: 50,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations

LED Characteristics

LED: High-output, long-life LED with 2-step binning and integrated driver technology
Color Consistency: 2-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Color Stability: LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period

Electrical

Driver: Constant Current, Class 2, 120VAC Only, 50/60Hz, 200mA, 0.07A
Dimming Driver: TRIAC and ELV (at 120V only).

See dimmer compatibility guide here.

Optical

Optics: 40° beam spread with specular thermoplastic optics

Spacing Criteria

0-180° (along): 0.68
90-270° (across): 0.68
diagonal: 0.74

Other

Equivalency: Equivalent to 50W MR16

Warranty

RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.

Buy American Act Compliance: RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.