SOUNDMAX SM-CCR3056F USB MicroSD Media Player Instruction Manual
- June 4, 2024
- SOUNDMAX
Table of Contents
SM-CCR3056F USB MicroSD Media Player
Instruction Manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended
to read this manual carefully before connecting, operating, and/or adjusting
the product and keep the manual for reference in the future.
This device is intended for installation in a vehicle with an onboard voltage
of 12 V. Designed to receive radio FM and play MP3 from media USB and microSD
(TF).
Important safeguards
- Read carefully through this manual to familiarize yourself with this high-quality sound system.
- The beginning of operation is the moment of the unit installation. Before using the device in winter it is recommended to heat up the passenger compartment for 20 seconds or to the operating temperature.
- Using the unit with a temperature that goes beyond the operating temperature greatly decreases the operation resource of the screen and other components of the device and can result in an outage.
- Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.
- When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.
- Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.
- Do not use the unit in places where it can be exposed to water, moisture, and dust.
- Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
- Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.
- Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
- The unit is designed for the negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before installation.
- Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise, it may overload or burn out the power amplifier.
| 1. Receiver | 1 pc |
|---|---|
| 2. Mounting parts: Release key | 2 pcs |
| 3. Mounting collar | 1 pc |
| 4. Instruction manual | 1 pc |
Installation/Connection
General notes
- Choose the mounting location where the unit will not interfere with the normal driving function of the
- Before finally installing the unit, connect the wiring and make sure that the unit works properly.
- Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the
- Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or from hot air, the heater, or where it would be subject to dust, dirt or excessive vibration.
- Install the sleeve into the dashboard; ensure it is installed on the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation.
- After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.
- Make the necessary wire connections. Ensure the connections are
- Install the unit into the sleeve until the side locks are fixed.
- Dashboard
- Sleeve tab to bend
Dismantling the unit
-
Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s negative (-) terminal.
-
Remove the metal strap attached to the back of the unit (if attached).
-
Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard, for this you need to break the plastic plugs.
Connection diagram
Notes:
- In spite of having any kind of speaker system, must use 4 ohms impedance of the speaker to reduce the distortion during high volume levels.
- It is prohibited to make the conductors of auto antenna and ground touch with each other. 0
- The negative electrode of the speaker mustn’t be grounded, or else it may burn the player!
Attention, connection ISO needs to be carefully matched with the description on the RL, the connection of any wrong cables (WHITE-BLACK/ GREEN- BLACK/ PURPLE-BLACK/ GRAY- BLACK) with Black cable (Ground) can be the reason for the defect in the built-in amplifier.
Control elements
Front panel
- Power/Mute/Pause
- MOD/CLK button
- VOLUME knob/S E L button
- button
- LCD
- IR receiver
- USB port
- AUX input
- Micro SD (TF) card slot
- Reset button (hole)
- button
- BND/AMS button
General operations
Turning the unit on/off
Press the V button to turn the unit on. Press the button again to turn the
unit off. In the radio state, short press this key into the mute state.
In the USB/SD/TF state, short press this key into the pause state.
Reset the unit
When first using the device or after replacing the car battery, you must
reset the unit. Press the RESET button (hole) with a pointed object (such as a
ballpoint pen) to set the unit to its initial state.
When some errors occur, you can also press the RESET button to return to
factory settings, but note that it will erase the clock setting and some
memorized functions.
Mode selection
Press the MOD/CLK button repeatedly to select between Radio, AUX, USB, and
SD modes. Operation modes are indicated on the display. USB and SD mode is not
available unless a memory card or a USB device is connected.
Volume control
Adjust the volume by rotating the VOLUME knob.
In the player state, press and this key to enter BAUEQ/INT/RPT/RDM function,
and use the volume knob to select the respective function.
Clock
Press and hold the MOD/CLK to show the time for 5 seconds. When the time is
shown, press and hold the button until the clock starts to blink, then rotate
the volume knob to set the current hour. Then press the button again to adjust
minutes (the minutes on display will blink), and rotate the volume knob to set
the current minutes. Press the button again to confirm the clock setting.
Audio parameter setting
In player/radio mode, short press the volume knob to enter ST/MONO and
dH/LOC/CH/STEP (i.e. Radio stereo/Mono channel, Short/long-range receiver,
Manual search, and Frequency step) function, and turn the VOL knob to select
the relevant function.
In the player state, press this key to enter BAL and EQ functions, and use the
volume knob to select the respective function.
In the player state, press and hold this key to select files, press and hold
it again to select and play the next folder, and so on.
AUX input
AUX-in jack is intended for connecting external audio equipment to amplify
the sound. If the connection is made correctly, the audio signal from the
external source will be transmitted through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example,
you can connect an MP3- player to listen to tracks using the car acoustic
system.
Radio operations
Band select
In Radio mode press the BND/AMS button to select a radio band: FM1 => FM2
=> FM3.
Manual/automatic tuning
- In radio mode, short press the VOL knob three times into “CH” mode and turn the VOL knob into the “STEP” mode, short press to select radio stations. Once the operation stops for more than 5 s, the system will return to “CH” mode.
- In “STEP” mode, after manually selecting the right radio station, long press 141 or a button to store it. The display will blink three times to confirm this storage and the previous station will be
- Press and hold **** or button, the unit will start the automatic search of a next or previous station with a strong signal in this band.
Storing and recalling stations
- Press and hold the BND/AMS button for several seconds to automatically find and store the 6 strongest stations in the current band. Each band can have 6 stations, for a total of 18 stations.
- Press shortly or The radio will select the previous or next stored station.
USB/TF operations
TF card slot
Carefully insert the TF card into the card slot on the front panel. The
unit starts playback automatically. To disconnect the memory card, press it
until a click, and then carefully pull it out from the slot.
USB port
Carefully connect a USB drive to the USB jack on the front panel. The unit
starts playback automatically.
USB/SD notes
USB format supports 2.0. Capacity: up to 32 GB. MicroSD/TF cards capacity:
up to 32 GB. Supported file systems are FAT/FAT32.
Note: Because of the great variety of products with SD-card slots and
their sometimes quite manufacturer-specific functions the producer can neither
guarantee that all devices will be recognized nor that all operating options
that are possible in theory will actually work. Before disconnecting storage,
switch the unit to another mode.
Next/ Previous track
Press or buttons to choose the next or previous track. Press and hold this
button to choose forward playback or backward playback; release the button to
return to normal playback.
Troubleshooting guide
Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If the below measures do not help, turn to a service center or to the nearest dealer.
| Symptom | Cause | Solution |
|---|---|---|
| No power | The wiring is connected incorrectly. | Make the correct wiring |
connection.
The car ignition is not on.| If the power supply is properly connected to the
car accessory, switch the ignition on.
The fuse is blown.| Replace the fuse.
No sound| Volume is in a minimum.| Adjust volume to the desired level.
The wiring is not properly connected.| Check the wiring connection.
The radio does not work| The antenna cable is not connected.| Insert the
antenna cable properly.
The radio station’s automatic tuning does not work| The signals are too weak.|
Select stations manually.
Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very dampened (not dropping wet) the
cloth with a weak solution of soapy water, and then wipe it clean.
Specification
General
Maximum power output| 4 x 40 W
Required speaker impedance| 4 Ohm
Fuse| 5 A
Unit dimensions| 178 x 50 x 38 mm
Net weight| 0.36 kg
Working temperature range| from -20 degree to +60 degree
FM stereo radio
Frequency range| 87.5 – 108.0 MHz
Frequency step| 0,1 MHz
Preset stations| 18
Stereo separation| >25 dB
Player
Supported storages| USB/microSD/TF
Support formats| Playback MP3 files from USB/TF (microSD) carriers
Line out| Stereo RCA output (2 V)
Line-in (AUX)| Mini Jack 3.5mm
Power supply
Supply voltage| DC 12V
Specifications are subject to change without notice. Dimensions are approximate.
Documents / Resources
|
SOUNDMAX SM-CCR3056F USB MicroSD Media
Player
[pdf] Instruction Manual
SM-CCR3056F USB MicroSD Media Player, SM-CCR3056F, USB MicroSD Media Player
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>