SOUNDMAX SM-PS4202 Portable Mini Music System with Bluetooth Instruction Manual

SOUNDMAX SM-PS4202 Portable Mini Music System with Bluetooth

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.

Description

1.  EQ/REP button
2. LED button
3. MODE button
4. Charge indicator
5.  DC 5V microUSB charging port
6.  Power ON/OFF button
7. TF (microSD) card slot
8. USB port
9.  AUX input 3.5mm
10.  Microphone input 6.35mm
11. Volume knob
12. ⏮ (PREVIOUS) button
13. ⏭ (NEXT) button
14. ⏯ (PLAY/PAUSE)/TWS button

Remote control

1. POWER button
2.  MODE button
3. STOP button
4. MUTE button
5. VOL+ button
6. (PREV)/CH- button
7. (NEXT)/CH+ button
8. (PLAY/PAUSE) button
9. VOL- button
10. REPEAT button
11. EQ button
12. Numeric buttons

Connection diagram

Important safeguards

• The instruction manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not expose the unit to vibration, direct sunlight, too high or low temperatures or humidity.
• Do not disassemble the unit yourselves Refer servicing to qualified service personnel All the illustrations in this manual are schematic images, which may differ from actual objects.

Power supply

• The unit operates on an internal rechargeable Li-ion battery and 220V mains via DC adapter (not included).
• The battery can be recharged with the provided USB charging cable. Before first plugging the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
• Insert the charging cable into the DC 5V microUSB socket on the unit.
• Connect the charging cable to a power adapter. Plug the adapter to the power source.
• For best results, try to fully charge the battery before each use. If the battery is drained, please allow it to recharge for a few hours.
• Press the POWER button to switch the unit on. Press it again to switch off.

General operations

Bluetooth wireless playback

• This unit can wirelessly playback audio from any device with Bluetooth A2DP function.
• The wireless range is approximately within 10 meters in direct line of sight.
• Wireless audio streaming requires pairing of a Bluetooth device (e.g. smartphone).

HOW TO PAIR YOUR DEVICE TO THIS UNIT:

• Make sure the Bluetooth function is switched on in your device (e.g. smartphone, tablet).
• Switch on the unit and press the MODE button repeatedly to select the Bluetooth mode (selected by default).
• Once the Bluetooth mode is active, you will find the unit listed in the Bluetooth connections list of your device (as SM-PS4202).
• If asked for a passcode, enter “0000”.
• The initial setup is required only once per device. The unit will automatically pair to the last paired device.
• When playing files, you can press button to pause and resume playback.
• Press the or button to go to a previous or next track. Rotate the knob to adjust volume.

External device connection

• You can connect the audio output of an external device to this unit, to listen to the sound of that device through the speaker.
• To connect an external audio device, please use an AUX cable with 3.5mm-to-3.5 mm plugs to connect the headphone out or audio line-out of the external device to the AUX input of this unit. The cable is not included.
• Press MODE button to select the AUX mode.
• Turn on the external device. You can rotate the volume knob or press the volume buttons on the RC to adjust volume.

USB/MicroSD operation

Playback

• Turn on the device.
• Insert a microSD (TF) card into the slot. Or insert a USB drive into the USB port. Press the MODE button repeatedly to select the USB or MicroSD mode.
• When playing, you can press to play/pause the playback.
• During the playback you can press the and buttons to go to the previous and next track. Rotate the volume indicator to adjust volume. It may take up to 60 seconds to open and verify a large microSD card / USB drive with many files.
• Press the EQ/REP button to switch between various equalizer presets.
• Press and hold the EQ/REP button to switch between various repeat modes (one track – folder – random – all tracks – off).

General USB/MicroSD notes

• This unit is equipped with a microSD slot and USB port that can read and play MP3 files stored on standard microSD cards and USB drives up to 32 GB.
• FAT32 file system is supported by this unit. Never remove microSD cards and USB drives from the unit during playback, always stop playback, then press the MODE button to switch to another mode before removing the storage to prevent damage to your files and cards/drives themselves.
• Slight noise during playback pauses is not a construction defect, it is determined by the factory presets of the dynamic noise reduction system.

FM radio

• Turn on the device.
•  Press the MODE button repeatedly to select the FM mode.
• Press PLAY/PAUSE to automatically scan and save all available radio stations. The procedure will take several minutes and cannot be interrupted.
• Radio frequency can be set manually using the numeric buttons on the remote control.
• Once the search is finished, you can press the and buttons to go to a previous or next radio station.

Microphone

You can connect the microphone for karaoke or other purposes into this unit by connecting it to the 6.35mm microphone input jack. Please do not plug the microphone when the unit is charging.

Mood light

The speakers will light up during playback. Press the LED button to switch it on and off. Press and hold LED to switch lighting modes.

Maintenance and care

Switch off the unit, unplug from the power supply. The outside of the appliance can be cleaned with a slightly damp cloth.

TWS function

• If you have two units at your disposal, you can pair them to each other and enable the True Wireless (TWS) stereo sound.
• Turn the both units on and switch them into the Bluetooth mode. Press and hold the ⏯/TWS on any of the units. A beep will sound, indicating that the
• units are paired. It is now the auxillary device (left channel). The other one is the main device (right channel). Press and hold TWS on the main device to unpair them.TWS works only in Bluetooth mode.

Accessories.

• Music system: 1 pc
• USB cable: 1 pc
• Remote control: 1 pc
• Microphone: 1 pc
• Instruction manual: 1 pc

Specifications

Specifications and functions are subject to change without notice. It is connected with continual improvement of the device. MANUFACTURED AND DISTRIBUTED BY TECHNO ELECTRIC LIMITED,  Legal address: 801 Luk Yu Building, 24 – 26 Stanley Street, Central, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>