AUKTECH AK01 Bluetooth Speaker User Guide

AUKTECH AK01 Bluetooth Speaker

Accessory

Safety Instructions

1. Please avoid any water while charging.
2. Avoid dropping or any extreme temperatures.
3. Please do not use any fast charger, PD charger, GaN charger or quick charger exceeds 5V output.

At a Glance

1. Indicator Light
2. Power Button
3. Bluetooth Button
4. Volume+ / Next Track
5. Multi-function Button
6. Volume- / Previous Track
7. USB-C Charging Port
8. 3.5mm Audio Input Port

Specifications

• Bluetooth Version: V5.0
• Driver Size: 45mm
• Distortion: ≤1.0%
• Audio Output:   24 Watts
• Power Input   Type-C 5V/2A
• Battery Capacity: 7.4V/2000mAh
• Frequency Response:   115Hz~15kHZ
• Bluetooth Range:  ≤30m/99ft (Open Field)
• Charging Time:  Approximately 4 hours Playing Time:  ≥24hours @65dB SPL(varies

Buttons Control

LED Indicator

1.  Flashing Blue: Bluetooth Pairing Mode or True Wireless Stereo Group Mode
2. Solid Blue: Connected to a device
3. Slow Flashing Red: Low battery
4. Solid Red: Charging
5. Solid Green: AUX-in Mode

Dynamic RGB Light

Short press the power button to enjoy 5 different lighting effects.

Bluetooth Pairing

1. Go to bluetooth settings on your mobile device, then search and select “AUKTECH AK01” from bluetooth list for the first time use.
2. When turned on, AUKTECH AK01 will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode.
3. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.

AUX Mode

1.  The speaker will automatically switch to AUX mode after you plug in an 3.5mm audio cable .
2. When using AUX mode, control audio playback via the connected device.

Standby Mode

If there is without any operation on the AUKTECH AK01 speaker after turned on, it will go into standby mode in 20 minutes. You can press the power button to turn on again to use.

True Wireless Stereo Mode

With True Wireless Stereo technology, you can pair two AUKTECH AK01 speakers to explore the best sound effects with left and right sound channels separated on both speakers.

1. Turn on two AK01 speakers, choose one of them as the primary speaker, press the “Bluetooth” button and hold for 3 seconds to enter into true wireless stereo pairing mode. There will be a tone after paired successfully.
2. Enable the Bluetooth on your device and connect to “AK01” .
3.  Only the primary speaker keeps the hands-free function during the call.

Charging

1. Use the included USB-C cable to charge and make sure it is fully charged before first use.
2. Do not charge your speaker for extended periods.
3. Place your speaker in a cool place when not in use.

Customer Service

1. 24-month limited warranty.
2. We promise to provide you with happy experience.
3. Please leave your ODER NUMBER and issue description while contact us.
4. For FAQ and more information, please visit our SUPPORT EMAIL: auktech_support_ue@163.com

FCC Statement

Changes or modification are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired  operation.  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

DOC
Learn more about the EU Declaration of Conformity, please click below link to download.
Link:
https://auktechaudio.com/upload/admin/20211221/AK01-DOC-EN.pdf
Link:
https://auktechaudio.com/upload/admin/20211221/AK01-DOC-DE.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>