SOUNDMAX SM-LED24M11S HD Ready 32 Inch TV Instruction Manual

SOUNDMAX SM-LED24M11S HD Ready 32 Inch TV

Specifications

• Model: SM-LED24M11S
• VESA Wall Mount: 100*100 mm
• Connections: HDMI, Coaxial output, RJ45 input, Mini AV input, Earphone output, CI slot

Stand Installation
Refer to the wall mounting instructions for securing the unit on the wall. Ensure the weight of the unit is supported by wall or ceiling mounting implements.

Outdoor Antenna Connection
Use a 75 Ohm cable plug or 300-75 Ohm impedance converter to connect the antenna input terminal on the rear of the cabinet.

Other Connections

• Mini AV Input: Connect video and audio sources using an RCA cable (not included).
• Coaxial Output: Transmit multichannel sound using a coaxial ncable (not included).
• HDMI Input: Connect video sources with an HDMI cable (not included).
• CI Slot: Use for CI modules from your digital TV provider.
• Earphone Output: Connect earphones to mute built-in speakers.
• RJ45 Input: Connect to the internet using an Ethernet cable (not included).

Remote Controller Exploitation
Ensure correct installation of batteries to avoid any explosions. The remote controller allows you to control sound settings, volume adjustments, audio descriptions, and more.

Common Setting

• Sound Mode
• Bass & Treble Adjustment
• Balance Control
• Auto-volume Control (AVC)
• Hearing Impaired & Audio Description Options

SMART TV General Information
Access available input channels, main menu, switch channels, adjust the volume, and power on/off the TV using the remote controller buttons.

FAQ

1. Q: How do I connect my TV to the internet?
   A: Use the RJ45 Ethernet port to connect the TV to the internetusing an Ethernet cable (not included).

2. Q: What should I use for wall mounting?
   A: Use a 100*100 mm VESA wall-mount bracket (not included) and M4 threads for wall mounting. Ensure proper installation to avoiddamage.

Instruction manual

Dear customer! this manual for pur hafore on proding, or aires at/s trousing compended to keep the manual for reference in the future.
The terms HDMI and HDMI High-Definition Multimedialnterface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

• Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

• This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.

• Always disconnect the power cord and antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periodsof time.

• When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord.

• Please contact the service center immediately if you found that the core is showed in the air or has been broken.

• Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even whenii was pushed in, otherwise, any accidents of shocks and fires would happen.

• Never touch the antenna lie or power plug if it stars to thunder.

• Do not touch the power plug with wet hands.

• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.

• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

• Over-press the panel may destroy the product.

• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table.
  The product may fall, causing serious accidents as well as the damage to the product.

• Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.

• Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

Before you start

• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.
• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.
• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.
• Please place all the signal cords behind of rear panel.
• Do not overexert or touch the panel when you convey the product. Do not transfer the LED TV up or down display direction.
• Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.
• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.
• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

Installation

Stand installation
Cover a flat stable surface with a soft cloth. Place the TV unit face-down on the cloth. Insert double support legs and fix them with supplied screws as shown below. Place the supplied protective caps on the edges of the legs.

Wall mounting
For wall mounting the back panel of this unit is equipped with a VESA slot. A 100*100 mm VESA wall-mount bracket (not included) and M4 threads should be used for wall mounting. Manufacturer is not responsible for improper mounting resulting in a damage to the unit.

WARNING

• In order to avoid damage, make sure to secure the unit on the wall according to the wall mounting instruction.
• Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.
• If you do not have sufficient skill and a set of tools to carry out installation work of a technically complex product, we recommend you to hire a third-party qualified contractor to avoid damage to the product or injury.
• All the images provided herein are schematic drawings and may differ from real objects.

Connection

Outdoor antenna connection
Use 75 Ohm cable plug or 300-75 Ohm impedance converter to plug in antenna input terminal on the rear of the cabinet.

Other connections

Operation

Control elements
Back panel

1. Ethernet port
2. Earphone socket
3. Coaxial audio output
4. HDMI 1 (ARC) input
5. HDMI 2 input
6. Antenna input
7. USB ports
8. Composite mini AV input
9. PCMCIA (CI) slot

Remote controller (RC)

Changing the battery

1. Remove the battery compartment cover on the back of the RC.
2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.
3. Install the cover back.

General operations Remote controller exploitation

• Take the battery out of the RC if it is not used for a long time
• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC
• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.
• Replace used batteries with the batteries of the same or comparable type.

CAUTION! !! Incorrect installation of the batteries may lead to an explosion.

• Press button on the unit or on the RC to switch on the power. Press POWER button again to switch the unit off and go the the stand-by mode. To completely power off the unit unplug the power cable from the outlet.

Signal sources
Press SOURCE button, then press DOWN/ UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from available source list. Press ENTER button on the RC to confirm.

TELETEXT operations (option)

• Select the TV source mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of Teletext.
• Press CH-/CH+ buttons to select the previous page or the next page.
• Teletext button functions are as follows: TEXT: Press this button to enter into Teletext mode. Follow the guides on screen and use the color buttons to navigate the Teletext. Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen. REVEAL: press this button to display and reveal hidden information. MIX: press to display a TV signal together with Teletext or only Teletext. HOLD: press this button to stop the move to the next page. Press this button again to cancel operation. INDEX: press this button to go to the index page. SIZE: press to adjust the size of Teletext.

OSD operation

1. Press MENU button to enter the setti menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the RC to select setting page.
3. Press OK button on the RC to go to the parameter list.
4. Press UP/DOWN cursor buttons on the RC to select a parameter to adjust.
5. Press LEFT/RIGHT cursor buttons on the RC to adjust the selected parameter.
6. Press MENU button to return to t previous menu page. Press EXIT button on the RC to quit the menu.

Some menu items may be in gray color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Picture

• Picture Mode: Select the favorite picture mode. Only when the picture mode is User can you select to customize settings.
• Backlight: Adjust the brightness of the screen.
• Noise Reduction: Dynamic noise reduction effect for reducing the video noise level.
• Aspect Ratio: Set the aspect ratio of the screen.
• Color Temp: Change the overall color cast of the picture.
• More Settings DLC: Enable or disable the Dynamic Lightness Control feature.

Sound

• Sound Mode: Select the favorite sound mode. Only when the sound mode is User can you select to customize Bass and Treble settings.
• Sound Out: Choose the sound output. Internal TV Speaker/SPDIF/Headphone.
• Balance: Select the proportion between the left and right speakers.
• AVC: toggle auto-volume control on/off. Volume automatically remains on the same level on different programs.
• Hearing Impaired : enable/disable audio description for persons with impaired hearing.
• Audio Description: switch the Audio Description feature on and off and adjust the volume level of the description.
• More Settings: Each broadcasting station has its own signal conditions, and volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
  SPDIF: OFF/RAW/PCM. Adjust digital sound settings via coaxial cable.
  SPDIF Delay: adjust the SPDIF delay.
  Surround: enable or disable the surround sound effect.
  Audio Only: in this mode the picture is off, only sound is played.

Operation

Channel

The appearance of the Channel menu varies depending on the selected signal source. Here it is shown for DVB-T2. Press DOWN to go to the TV options menu.

• Antenna Type: Select Air/Cable/Satellite.
• Scan Auto Scan: Automatic search can search for effective program channel automatically. Select Start Scan, then press OK button to start auto search. Press MENU button to quit. Digital Manual Scan: Press LEFT/RIGHT cursor buttons to select channel number. Select Start Scan, then press OK button to start searching. If the selected channel number is available, the channel will be saved under the selected number. Press MENU button to quit. Analog Manual Scan: Search for analog channels the same way as for digital.
• Signal Information: View the status of the current signal.
• Channel List: Go to TV channel list menu to edit the channel.
• Cl Card (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a Cl card into the PCMCIA slot according to the arrow on the Cl card. The function can only be gotten when Cl slot is available.
• It is possible for you to change Cl (Common Interface) menu screen and service by consulting your dealer.
• Please do not insert or pull out the Cl card when power on. During initialization of the Cl card, please don’t operate the TV.
• Do not insert or pull out the Cl card frequently so as to avoid any damages of the TV and the Cl card.

Lock

• Change Password: You can set your private password. Press the number buttons on the remote control to set the new password. When the new password has been put in twice, the setting is finished successfully. The TV will go back to previous menu.
• System Lock: The feature can prevent unauthorized operation of the TV set unless entering a 4-digit password. When Lock System is on and the system is locked, you must input the system password to access some settings. Press the right number buttons for the password. The default password is 0000. & After a password correction has been confirmed, please remember it for entering into the Parental Guidance menu, all functions can not be activated until the correct password is entered.
• Parental Guidance: set the access to age-sensitive content.
• Keyboard Lock: lock and unlock the buttons on the TV set.

Common

• PVR Setting: access the video recording settings.

• Timer Settings:

• OSD Timer: set the OSD display time. Autostandby Timer: select the time to automatic switch to standby mode if no action is provided.
  Sleep Timer: select the period until automaticswitch-off of the TV.

• Blue Screen: toggle showing blue screen when there is no signal.

• Teletext: select the language of the Teletext.

• Audio Languages: select the language of audio for some DTV programs that have multilanguage support.

• HDMI CEC: switch the HDMI Consumer Electronic Control feature on or off and adjust its settings.

• Hotel Mode: when the Hotel Mode is on, you can block and restrict some settings such as signal source, max volume level, ect.

• Menu Reset: reset the parameters to their default values.

USB operation General playback information

• Insert a USB drive into the USB port. There will be a Multimedia playback menu on the Home screen, in which you can select Music, Photo and Movie contents to play by pressing cursor buttons and OK button.
• USB file systems supported: FAT16, FAT32, NTFS. 2.0 USB version is supported; maximum capacity 2 TB (NTFS). For correct and satisfactory operation, licensed USB devices of well-known brands should be used. Avoid using USB devices of unknown brands. Playback of some file formats cannot be supported.
• This unit supports playback of video files with ASF, AVI, MKV, MPG extensions, with video codecs H263, MPEG-4, MPEGII, XVID and audio codecs MP3, DD(AC3). The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs should be read by this unit.
• Some AVI files cannot be played due to their parameters and recording conditions. Video files with AVI extension exceeding 2 GB in size may be played partially. According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power fo connected USB drives with power consumptior exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warranty cases. Warning: usage of external USB drives containing BIN and PKG files in the root directory may cause malfunction of the unit or damage to the software.

Operations of file playback

• Insert a USB into the USB port. The screen will show a USB playback window, in which you can select Music, Photo and Movie contents to play by pressing cursor buttons and OK button.
• In the content menu, press cursor buttons to select folder, press OK button to enter it, then press cursor buttons to select the file you want to watch or to listen to. Press OK to play the selected file.
• While playback, press OK button; the bottom of the screen will show playback menu in which you can select an operation by LEFT/ RIGHT cursor buttons or perform this operation by pressing OK button.
• While playback, press button to pause or resume playback. Press button to stop plavback.
• When playing music files you can press 1 buttons to fast reverse or forward. You can press I buttons to select the desired files manually in normal condition.
• When playing photo files, you can press 41> buttons to page up or page down the file. Press LEFT/RIGHT cursor buttons to rotate the image.
• Press EXIT button to stop playback and return to the previous menu screen.

Electronic programme guide (EPG)
If you know the airing time of the current programme you can access the EPG menu by pressing the EPG button on the RC. The menu displays the list of the current available channels on the left, and the name of each programme starting in scheduled time periods on the right. Select the channel by pressing UP/DOWN and the programme by pressing LEFT/RIGHT. Follow the on- screen instructions and use color buttons to navigate this menu.

PVR/Timeshift function Insert a USB drive, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until button is pressed or the memory is full. PVR/Timeshift is a feature enabling you to pause the current air program and resume watching from the same spot. Press button to activate Time Shift while recording. You can operate referring to PVR/Timeshift menu on the screen.

Cl information (only in DTV mode):

This function enables you to watch some encrypted services (pay services). Please insert a Cl card into the PCMCIA slot according to the arrow on the Cl card. The function can only be available when Cl card is present.

• It is possible for you to change Cl (Common Interface) menu screen and service by consulting your dealer.
• Please do not insert or pull out the Cl card when power on. During initialization of the Cl card, please don’t operate the TV.
• Do not insert or pull out the Cl card frequently so as to avoid any damages of the TV and the Cl card.
• If there is no picture and/or sound with the CI+ CAM module inserted, please contact the customer support of the service provider.

SMART TV

General Information

• This unit supports the SMART TV feature. For a detailed information about its operation please refer to a separate leaflet included in the documentation package.

User has direct access to less storage than that, as the opearting system and pre-installed applications already occupy some of that memory.

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.
• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor’s surgery or hospital.
• SNOW: Weak TV signals from long distant stations result in an instead picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed.
• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning.
• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.

Accessories

1. LED TV 1 pc
2. Remote control 1 pc
3. Battery 2 pos
4.  Stand 2 pcs
5. Screw 2 pcs
6. Instruction manual2 pcs

Specifications

The LED panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LED TV.
The actual glow of the power indicator in operating/standby mode may differ from the description in the User Manual.
Warning: Specifications may be subject to change without notice for improvement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>