SOUNDMAX SM-1596 Radio with Alarm Instruction Manual

: June 11, 2024
: SOUNDMAX

Table of Contents

Description
- Stand assembly
Important safeguards
Power supply
- Battery operation
- DС operation
General operations
Maintenance and care
Package set
Specifications
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SOUNDMAX SM-1596 Radio with Alarm

Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.

Description

Stand assembly

Important safeguards

The instruction manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. Keep the manual for future use.
Do not hit or drop the unit.
Do not expose the unit to vibration, direct sunlight, too high or low temperatures or humidity.
Do not disassemble the unit yourselves. Refer servicing to qualified service personnel.
All the illustrations in this manual are schematic images, which may differ from actual objects.

Power supply

Battery operation

Insert 1 CR2032 battery (included) to the terminals inside the battery compartment according to the polarity marks (+ and -). Your set will have a limited operation from the battery supply, but there is now the advantage that, in case of a mains current failure or power outage, your clock will continue to work. The clock display will not light up, the clock time and alarm setting will be held in the clock memory by the battery back-up system.
This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used for short-term power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy.
When the battery is exhausted, it should be removed from the set to prevent leakage. If you do not wish to take advantage of the battery back-up system, your set will work normally without batteries. However, if disconnected from the mains, the clock figures will flash when the mains are reconnected and you must re-set the clock.

DС operation

The appliance is for household use only.
Before the first connecting of the appliance
check that the voltage indicated on the rating label corresponds to the mains voltage in your location.
Plug the supplied AC/DC power adaptor into the DC adaptor input on the back of the unit. Connect the power cord to the AC household main outlet. Make sure the voltage is compatible.
Always remember to disconnect the power cord from the main supply before disconnecting it from the unit.

General operations

Placement

Place the device close to you, approximately 40-50 cm from your head, for example, on a bedside table.

Setting time

You have to set the clock time when you plug in the appliance for the first time and when there has been a power failure.
When the time starts to blink touch to adjust it. Touch to confirm. Setting will be canceled if no button is pressed in 10 seconds.
Change current time by pressing and holding for 3 seconds until the time starts to blink. Touch to adjust it. Touch to confirm. Setting will be canceled if no button is pressed in 10 seconds.
Choose between a 12-hour and 24-hour modes by pressing . When the 12-hour format is selected, AM or PM will be displayed.
Press to adjust the brightness of time display: Low – High – Off.
When low brightness is selected, it will automatically change to high brightness when you change any settings, and then revert back to low intensity after 5 seconds.

Light

Press once to switch on white light and use it as a bedside lamp. You can adjust the light intensity by touching , there are 10 levels in total.
Press again to enter into an automatic color changing mode and use it as a mood light. Touch to select color from green, red, blue, purple, orange or indigo.
• Touch for a third time to swit the light off.

Setting the alarm

Press to switch the alarm on or off. The alarm symbol appears on the display when you switch on the alarm, and disappears when you switch it off.
Press and hold to set the alarm, the time indication will start to blink and you can adjust the alarm time by pressing . Press to confirm the alarm time. Setting will be canceled if no button is pressed within 5 seconds.
• Press then press to choose between 1 and 7 as a wake-up sound (1-6 are pre-set nature sounds, 7 is FM radio). If you choose from 1 to 6 as the alarm sound, a sample of that sound will play for 60 seconds, if you choose 7, your last listened FM radio station will be set as the alarm signal. Press to confirm. Setting will be canceled if no button is pressed within 60 seconds.
You can choose the wake-up sound volume level between 00 and 15 (the default is 3) by pressing ) up to 15, then back from 15 to 00.

Sunrise simulation wake-up light

30 minutes before the alarm time, the sunrise simulation white light will be on from 10°/o to 100°/o intensity at alarm time to prepare our body for waking up and getting alert.
When the alarm time comes, the wakeup sound will play for 5 minutes. During this time you can touch to enter the snooze mode, the wake-up sound will play again after 5 minutes and last for 5 minutes. Touch or press any button except to stop the sound and wake-up light. During the wake-up light period, you can switch off the wake-up light by touching and holding

• If the radio is playing when the alarm time comes, the default alarm sound will play and the radio will stop. The radio will resume after the alarm sound is stopped

Sunset simulation and sleep time

Press to switch the sunset simulation. 111511 will be displayed. Press repeatedly to select 15 /30 / 60 / OFF. The numbers represent the time in minutes that the light will take to dim. When the desired number is displayed, don’t press any buttons for 5 seconds. This will set the sunset time.
During sunset simulation the button will flash. Press it to cancel the simulation and keep the current brightness. Press and hold the :o: button to switch off the Ii ht.
If the radio is playing during the sunset simulation, it will switch off together with the light.

Radio

Press the FM button to turn the radio on and off.
In FM radio mode touch and hold FM to automatically scan and save available radio stations. Touch to switch between stations.
Adjust the volume from 00 to 15 by pressing .
To get a good radio signal, fully unwind the antenna and move it around until you get the best reception.

Maintenance and care

Switch off the unit, unplug from the power supply. The outside of the appliance can be cleaned with a slightly damp cloth.

Package set

Radio with alarm	1 pc
AC/DC Adaptor	1 pc
USB cable	1 pc
CR2032 battery	1 pc
Instruction manual	1 pc

Specifications

AC/DC adaptor	Input: ~ 100-240 V; 50/60 Hz Output: 5 V, 1 A
Nominal power consumption	4 W
Backup	3 V (CR2032*1)
Display	0.8″ (2 cm) LED
Frequency range	FM: 87.5 – 108 MHz
Unit dimensions	170 x 83 x 183 mm
Net weight	~ 0.425 kg