TORO 79345 TimeCutter HD Mower E-Z Vac Twin Bagger Accessory User Manual
- June 3, 2024
- Toro
Table of Contents
TORO 79345 TimeCutter HD Mower E-Z Vac Twin Bagger Accessory
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference
number for a part also appears in the parts list, along with other information
about the part.
This catalog uses two special reference number formats, one to indicate parts
in a service assembly and another to indicate the quantity of a given part in
an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The a
represents the reference number of the entire service assembly and the b
represents a sequential number unique to each part within the service
assembly.
For example, a wheel assembly might be identified by reference number 6, the
tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the
assembly identified by reference number 6, you receive all parts identified by
reference numbers 6:1,6:2, and 6:3. However, you may also order any part
individually. Reference numbers of this type appear in illustration and in
parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the
reference number has the form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of
the parts identified by reference number 37 are indicated.
Bagger and Weight Assembly
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 136-4231-03| 1| Frame-Pivot| | 17| 32144-70| 4| Screw-HWHTF
2| 140-2086-03| 1| Support-Upper| | 18| 139-2630| 2| Bolt-CARR
3| 140-0444| 2| Rod-Support| | 19| 119-4041| 8| Nut-HF
4| 131-4189| 1| Rod-Hood, Down| | 20| 139-2596| 2| Screw-HHF
5| 112-3994| 2| Bag ASM| | 21| 139-2611| 2| Washer-Flat
6| 140-5016| 2| Bracket-Hopper Pivot| | 22| 139-2562| 3| Pin-Hair
7| 140-5031| 1| Bagger Hood ASM| | 23| 120-7127| 1| Pin-Cotter, Circular
9| 136-7461-03| 1| Bracket-Weight, RH| | 24| 112-3993| 1| Screen-Bagger
10| 136-7462-03| 1| Bracket-Weight, LH| | 25| 116-4992| 1| Latch-Rubber
11| 120-5491-03| 1| Channel-Weight, Bagger| | 26| 137-3073| 2| Washer-Plain
12| 109-9742-05| 1| Weight-35 Pound| | 27| 137-9137| 2| Screw-PPH
13| 109-9759| 1| Pin-Weight| | 29| 116-4126| 1| Seal
14| 119-4042| 4| Nut-HF, NI| | 30| 116-4127-03| 1| Plate-Backing
15| 137-3064| 2| Bolt-CARR| | 31| 139-1702| 4| Bolt-Carriage
16| 119-4061| 2| Screw-HHF| | 32| 137-3083| 2| Pin-Hair
Bag Assembly No 112-3994
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 114972-03| 1| Frame-Bag| | 4| 3230-1| 2| Bolt-CARR
2| 114973-03| 1| Hanger-Bag| | 5| 3296-29| 2| Nut-Lock, NI
3| 114974-03| 1| Clamp| | 6| 110-6674| 1| Bag
Bagger Hood Assembly No. 140-5031
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
2| 99-4693| 1| Decal| | 6| 137-3073| 4| Washer-Plain
3| 114439| 12| Rivet-Blind| | 7| 116-4478| 1| Gasket
4| 109-6809| 1| Decal-Caution, Bagger| | 8| 112-4000-03| 1| Ring-Retainer
5| 116-5071-03| 1| Stiffener-Bagger, Top| | | | |
Blower and Tube Assembly
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 136-4152| 1| Pivot-Blower| | 9| 136-4151| 1| Cover-Belt, RH
2| 110-9380| 2| Screw-HWH| | 10| 133-7022-03| 1| Baffle-Outer
3| 125-0085| 1| Pulley-Bagger| | 11| 133-7021-03| 1| Baffle-Inner
4| 125-0086| 1| Pulley-Bagger| | 12| 119-4041| 4| Nut-HF
5| 140-5032| 1| Blower ASM – Powered| | 13| 137-3061| 4| Bolt-CARR
| | | Bagger| | 14| 136-4172| 1| Cover-Bagger, Powered
6| 127-0074| 1| Belt-V| | 15| 140-5030| 1| Tube ASM-Lower
7| 127-0075| 1| Belt-V| | 16| 140-5029| 1| Tube ASM-Upper
8| 127-0076| 1| Belt-V| | | | |
Blower Assembly No. 140-5032
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 133-9287-03| 1| Frame-Blower| | 17| 140-5020| 1| Bolt Shoulder
2| 121-0751| 1| Spindle ASM| | 18| 137-7040| 1| Spring-Return, Pedal
2:2| 120-7935| 2| Spacer| | 19| 139-1719| 1| Screw-HH
2:3| 136-5441| 2| Bearing-Ball| | 20| 137-5004| 1| Blower Chute ASM
3| 32144-70| 4| Screw-HWHTF| | 20:1| 136-7514| 1| Chute-Blower
4| 137-7009| 1| Shaft-Spindle| | 21| 120-7950| 10| Screw-Torx
5| 133-4492| 1| Pulley-Blower| | 23| 137-5003| 1| Blower Cover ASM
6| 133-4336| 1| Fan-Blower| | 23:2| 136-4164| 1| Decal-Danger
7| 3290-465| 1| Washer-Belleville| | 24| 3258-166| 5| Screw-PRH
8| 108-8823| 1| Screw-HH| | 25| 139-2560| 1| Bolt-Shoulder
9| 3219-16| 1| Nut-Hex| | 26| 133-7058| 1| Latch-Blower
10| 140-5015| 1| Spacer-Idler Arm| | 27| 119-4042| 1| Nut-HF, NI
11| 140-5019| 1| Idler Arm, Blower| | 28| 133-7048| 1| Spring-Torsion
12| 138-7597| 1| Pulley-Idler, Flat| | 30| 98-8332| 1| Knob
13| 5-4460| 1| Washer-Pivot| | 31| 103-4080| 2| Latch-Rubber
14| 119-4041| 3| Nut-HF| | 32| 137-3073| 4| Washer-Plain
15| 139-1723| 1| Washer-Flat| | 33| 3274-39| 4| Screw-HSBH
16| 120-2779| 1| Screw-HH| | 34| 136-9213-03| 1| Guard-Blower