SHARP 2T-C42FG1X LED Backlight TV User Guide

SHARP 2T-C42FG1X LED Backlight TV

Product Information

Specifications

• Model: 2T-C42FG1X
• Part Number: TINS-H702WJZZ
• Type: LED Backlight TV

Supplied Accessories

• Remote control unit (1)
• AAA size battery (2)
• Initial setup guide
• Stand base
• Screws (4)

Product Usage Instructions

Inserting the Batteries

To insert the batteries into the remote control unit:

1. Open the battery compartment on the remote control unit.
2. Insert two AAA size batteries into the compartment, making sure to match the positive and negative terminals correctly.
3. Close the battery compartment.

Attaching the Stand

Before attaching the stand, make sure to work on a stable and flat surface. Follow these steps:

1. Place a soft cushion on a stable and wide table.
2. Assemble the stand base by attaching the left (L) and right (R) parts together.
3. Carefully lift the TV with two or more people, avoiding grabbing the corners.
4. Place the TV on the soft cushion.
5. Insert the stand assembly into the openings on the bottom of the TV.
6. Tighten the screws into the holes on the bottom of the TV to secure the stand.

Important Safety Precautions

Before using the product, please read and follow these important safety precautions:

• Do not use liquid cleaners, aerosol cleaners, or chemical cloth to clean the product as they may damage it.
• Avoid using the product near water, such as in a bathroom, near a swimming pool, or in a wet basement.
• Do not place any objects filled with liquids, such as vases or cups, on the product to prevent spills that may cause electrical shock.
• Ensure proper ventilation by not blocking the product’s vents and openings. Avoid placing the product on surfaces like beds, sofas, or rugs that can block ventilation.
• Only use a cart, stand, tripod, bracket, or table recommended by the manufacturer for mounting or placing the product.
• If mounting the product on a wall, carefully follow the manufacturer’s instructions and use the recommended mounting hardware.
• Avoid placing the product on an uneven surface that can cause it to fall from the cart.
• Do not place the product in an enclosed place like a bookcase or rack unless proper ventilation is provided or following the manufacturer’s instructions.

Frequently Asked Questions (FAQ)

Q: Can I use any type of batteries for the remote control unit?
A: No, you need to use two AAA size batteries for the remote control unit.

Q: Can I clean the TV with a liquid cleaner?
A: No, it is not recommended to use liquid cleaners as they may damage the product. Use a soft cloth instead.

Q: Can I mount the TV on any type of wall?
A: No, you should follow the manufacturer’s instructions and use the recommended mounting hardware for wall mounting.

Initial setup guide

• Please read “Important safety precautions” before setting up the TV.

A. Supplied accessories

B. Inserting the batteries

Remote control unit

CAUTION

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

C. Attaching the stand

1. Assemble on a soft cushion on a stable, flat and wide table.

2. Work with two or more people.
   Do not grab the corners of the TV when lifting.

3. Do not remove the protective pad until the installation is completed.

Step 1 Insert the stand assembly into the openings on the bottom of the TV.

Step 2 Insert and tighten the screws into the holes on the bottom of the TV.

CAUTION

• Do not remove protective pad until TV is assembled. Otherwise, the screen can be damaged from direct pressure.

Dear SHARP customer
To you for of Your product, los a c pora roy to a ions aty balone in this route.

Important Safety Precautions

• Stand base must be attached to prevent the TV set from falling down and cause injuries.

• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
  • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

• Do not place vases or any other water-filled containers on this product.
  The water may spill onto the product causing fire or electric shock.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.

• Heat sources – Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.

• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.

• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets.

• The LCD panel is made with extremely high precision technology, and has 99.99% or more effective pixels.
  The 0.01% or less missing pixels or those that are always lit is not a malfunction.

Precautions when transnortina the TV

When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands – one hand on each side of the TV.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT terminal on the rear of the product.

• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.
  Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

• Do not install the TV in a location in which it will be subject to water drops such as underneath an air conditioning unit or in the vicinity of a humidifier.

• Water drops falling onto the TV and water entering inside it may result in fire, electric shock, or malfunctions.

• We recommend that you install the TV at least 1m away from the outlet of an air conditioner.

Initial installation

Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection.

1. Connect an antenna cable to the antenna terminal.

2. Plug the AC cord into the AC outlet.

   • Place the TV close to the AC outlet, and keep the power plug within reach.
   • Product shape varies in some countries.

3. Press (JOG-KEY) on the TV.

4. Run the initial installation.

   • Follow the guide on the TV screen to set the settings.
     For Two tuners model only
     Receiving satellite digital broadcast

5. Run the initial installation.

   • Follow the guide on the TV screen to set the settings.

NOTE

• During run the satellite initial installation, you need to select correct region.

Terminal diagram

TV (rear)

Viewing E-Manual

Viewing the Built-in Operation Manual

1. Press (HOME) to display the HOME screen, press / to select “Manual”, and then press ENTER.
   This displays the built-in operation manual screen.

2. When you select contents, its page will be displayed.

Appendix

Troubleshooting

The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced.

•   Is the AC cord disconnected?

•   Has the power been turned on?

•  Remote control unit does not operate.| •   Are batteries inserted with polarity (+, –) aligned?
•   No picture.| •   Is connection to other components correct?
•   No sound.| •   Is connection to other components correct?

Clearing the password

If you forget the password, clear the password using the following procedure.

1. From the Dashboard screen, select “Settings” > “System” > “About” > “Reset” > “Factory reset”, and then press ENTER.
2. When you perform a reset, the TV will be returned to the factory preset values, and you need to set the password again.

NOTE

• The default PIN is “1234”.
• As a precautionary measure, make a note of your password, and keep it in a safe place.

Symbols placed on equipment

• This mark indicates the product operates on AC Voltage
• This mark indicates a class II or double insulated electrical appliance wherein the product does not require a safety connection to electrical earth (ground).

Specifications

standard

| Analogue| PAL: B/G, D/K, I  SECAM: B/G, D/K, K/K1  NTSC: M
Digital| DTV
Receiving channel| VHF/UHF| 44.25—863.25 MHz
Satellite| 950—2150 MHz (Two tuners model only)
TV-tuning system| Auto Preset
STEREO/BILINGUAL| NICAM: B/G, I, D/K A2 stereo: B/G MTS:M
Audio amplifier| 7.5 W x 2
Terminals| ANT (Antenna input)| 75 q DIN type / Satellite 75 q F type (Two tuners model only)
HDMI 1 (ARC)| HDMI (HDMI input), ARC
HDMI 2| HDMI (HDMI input)
HDMI 3| HDMI (HDMI input)
AV IN| AUDIO in, VIDEO in
USB 1| USB (DC5V 1.5A output)
USB 2| USB (DC5V 1.5A output)
LAN (10/100 BASE-T)| Network connector
Headphone| 3.5 mm stereo
SERVICE ONLY| 3.5 mm jack
WIFI Protocole| IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band
WIFI Security| WFA/WPA/WPA2
Bluetooth| V2.1/3.0/4.2/5.1
OSD language| English/Simplified Chinese/Traditional Chinese/Arabic/French/Portuguese/Russian/ Thai/Vietnamese/Indonesia/Malay
English – For Philippines
English/Simplified Chinese/Traditional Chinese (Hong Kong) – For Hong Kong
Power requirement| AC 110 — 240 V, 50/60 Hz
Power consumption (Standby)| 86 W (0.6W)
Dimensions| without stand

W x H x D (mm)

| 950 x 544 x 80
with stand

W x H x D (mm)

| 950 x 599 x 244
Weight without stand (with stand)| 7.1 kg (7.4 kg)
Operating temperature| 0  to +40

• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of
• Specification may dier depending on de silent ed co these values in individual units.

CAUTION

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
• Do not install / mount the TV with tilting condition.

Trademarks

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP Corporation is under license. Other trademarks and trade names are those of their respective owners.
ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO,WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400 E,Greenwood Village, Colorado 80111 U.S.A.

THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (VC-1 VIDEO”) AND/OR (i) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE hsttp://WWW.MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (*AVC VIDEO” AND/OR (i) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE hsttp://WWW.MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE hsttp://WWW.MPEGLA.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>