Holmes HCF0611A Tight Grip Personal Fan Owner’s Manual

: June 17, 2024
: Holmes

Table of Contents

Holmes HCF0611A Tight Grip Personal Fan
Product Information
Product Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
CLEANING/MAINTENANCE INSTRUCTIONS
WARRANTY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Holmes HCF0611A Tight Grip Personal Fan

Product Information

Specifications

Model: HCF0611A
Type: Personal Fan
Manufacturer: Sunbeam Products, Inc.
Location: Boca Raton, Florida 33431, USA
Power Source: Standard 120-volt AC outlet
Usage: Household use only

Product Usage Instructions

Assembly Instructions

Your Fan comes with the following components:

Fan head
Pole with clip
Tilt adjustment knob screw/nut
Optional removable base

Follow these steps to assemble the fan:

Unpack the fan.
Insert the fan head into the pole.
Secure the fan head with the provided tilt adjustment knob/screw and nut.
If desired, attach the fan to the provided base to convert it into a desk fan.

Adjustment Instructions

To change the tilting angle of the fan head, loosen the tilt adjustment knob.
Move the fan head to the desired angle.
Firmly tighten the knob to lock the fan head in place.
WARNING: Make sure to support the fan head assembly when loosening the tilt adjustment knob to prevent the pole from collapsing due to the weight of the fan head.

Horizontal Adjustment

Turn the fan head in the desired direction.

FAQ

Q: Can I use this fan outdoors?
A: No, this fan is not designed for outdoor use. It is intended for household use only.
Q: Can I use this fan in a commercial or industrial setting?
A: No, this fan is intended for household use only and should not be used in commercial or industrial applications.
Q: What should I do if the plug does not fit fully in the outlet?
A: If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not attempt to modify the plug or defeat its safety feature in any way.

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

Read all instructions before using this appliance.
Use fan only for purposes described in the instruction manual.
To protect against electrical shock do not immerse the unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
Close supervision is necessary when any appliance is used by or near children.
Unplug from the outlet when not in use, when moving the fan from one location to another, before putting on or taking off parts and before cleaning.
Avoid contact with moving parts.
Do not operate in the presence of explosive and/or flammable fumes.
To avoid fire hazards, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard the fan or return it to an authorized service facility for examination and/or repair.
Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high-traffic areas.
Do not use outdoors.
To disconnect, grip the plug and pull from the wall outlet. Never yank on the cord.
Always use on a dry, level surface.
Do not operate the fan until fully assembled with all parts properly in place.
This product is intended for household use ONLY and not for commercial or industrial applications.
WARNING: To reduce the risk of electrical shock and injury to persons, do not use the window.
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

ASSEMBLY INSTRUCTIONS

Your Fan comes with the assembled fan head, a pole with a clip, a Tilt adjustment knob screw/nut and an optional removable base. Carefully unpack your fan, insert the fan head into the pole and secure it with the provided tilt adjustment knob/screw and nut (see Figure 1).

CONVERTING TO A DESK FAN
To convert to a desk fan, simply clip the fan onto the provided base (see Figure 1), and use the fan on a dry and level surface.

A. Fan Head
B. Carry Handle
C. Motor Housing
D. Speed Control Knob
E. Securing Nut
F. Tilt Adjustment Knob/Screw
G. Pole
H. Clip
I. Base (Optional -Desk Fan only)
J. Rubber Grips

Holmes-HCF0611A-Tight-Grip-Personal-Fan-FIG-2

OPERATING INSTRUCTIONS

Clip fan onto a dry, solid surface.
Plug the cord into any standard 120-volt AC outlet.
Please make sure the speed control is in the OFF (0) position.
The speed control knob is located at the back of the Fan Motor Housing. The speed is adjusted by turning the control knob to the desired setting, Off-Low-High (0-1-2).

WARNING: Do not clip this fan to any delicate surface as this may leave a permanent mark. Also, to reduce the risk of the fan tipping over, avoid clipping to surfaces that cannot be firmly and fully gripped. It is recommended to clip the fan on a flat surface with 5-25 mm thickness.

ADJUSTMENT INSTRUCTIONS
Vertical Angle Adjustment

To change the tilting angle of the fan head, simply loosen the tilt adjustment knob.
Move the fan head to the desired angle, then firmly tighten the knob to lock the fan head in place.

WARNING: MAKE SURE TO SUPPORT THE FAN HEAD ASSEMBLY WHEN LOOSENING THE TILT ADJUSTMENT KNOB, AS THE WEIGHT OF THE FAN HEAD MAY CAUSE THE POLE TO COLLAPSE.
Horizontal Adjustment
Turn the fan head in the desired direction.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your fan. Please remember:

REPLACEABLE FUSE
If your (5 Amp, 125 Volt) replaceable fuse blows, please order a new fuse at 1-800-546-5637. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

Unplug your fan. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Open the fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.
NOTE: Ensure that the fuse cover is completely open before attempting to remove the fuse.
Remove the fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse. (see Figure 2)
Place plug on a solid, flat
surface. Insert a new 5 Amp, 125 Volt fuse into the fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.
CAUTION: Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
The slide fuse cover closed completely. If the fuse cover is difficult to close, make sure the fuse is secured in place completely by pressing down on the metal ends of the fuse.
Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed.
Discard the product if the attachment plug is damaged.

FAN CLEANING

Always unplug the fan before cleaning or disassembling.
Do not allow water to drip on or enter into fan housing.
Be sure to use a soft cloth moistened with a mild soap solution.
Do not use any of the following as a cleaner: gasoline, thinner, or benzene.

Clean the fan grill, housing and base with a soft, damp cloth. DO NOT ATTEMPT TO REMOVE THE FAN BLADE. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE
When storing your fan in the off-season, it is important to keep it in a safe dry location. It is important to protect the fan head from dust. We strongly recommend using the original box from purchase.

If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com.

WARRANTY INFORMATION

1-YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, a replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of the initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centres, or retail stores selling JCS products do not have the right to alter, modify or in any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service centre. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against the purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.
If you have any questions regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637 and a convenient service center address will be provided to you. In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. If you have any other problem or claim in connection with this product, please write to our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR THE PLACE OF PURCHASE.

© 2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Floride 33431.