ROWLINSON SS341A Marberry Obelisk Planter Instruction Manual
- June 12, 2024
- ROWLINSON
Table of Contents
ROWLINSON SS341A Marberry Obelisk Planter
Product Information
Marberry Obelisk Planter
The Marberry Obelisk Planter is a garden product manufactured by Rowlinson Garden Products Limited. It is designed to add a decorative element to your garden while providing a space for planting flowers or other greenery. The planter features an obelisk structure with legs and frames for stability and a cap and finial for added visual appeal. The product is made of wood and is treated with copper hydroxide carbonate/II/ and boric acid, which protect the wood against fungal decay/rot and insect attack.
Recommended Tools for Assembly:
- No. 8 L-bracket
- 16mm screws (8 pieces)
- 40mm screws (12 pieces)
- 50mm screws (16 pieces)
Components
| No. | Components | Qty. |
|---|---|---|
| 1 | Planter base | 1 |
| 2 | Obelisk legs | 4 |
| 3 | Obelisk frame (220mm) | 4 |
| 4 | Obelisk frame (160mm) | 4 |
| 5 | Obelisk frame (100mm) | 4 |
| 6 | Cap | 1 |
| 7 | Finial | 1 |
| 8 | L-bracket | 4 |
| 9 | 50mm screws | 16 |
| 10 | 40mm screws | 12 |
| 11 | 16mm screws | 8 |
| 12 | Planter liner material | 1 |
Product Usage Instructions
Assembly Instructions:
- Obelisk legs and frame:
Secure two legs together using one of each length frame. Use 2 x 50mm screws to secure the longer-length frame at the bottom through the pre-drilled holes. Secure the middle and top frames using 2 x 40mm screws for each frame. Repeat this step to create a second structure.
- Join the two-leg sections:
Join the two leg sections by securing them together. Use 2 x 50mm screws per frame to secure the longer-length frames at the bottom through the pre-drilled holes. Secure the middle and top frames using 2 x 40mm screws for each frame.
- Secure obelisk to planter base:
- Position the obelisk onto the planter base. Place an L-bracket under each of the legs and carefully remove the obelisk. Secure each bracket to the base using a 1 x 16mm screw per bracket. Replace the obelisk and secure the brackets to the obelisk using 1 x 16mm screw per bracket.
- Note: It is recommended to assemble the Marberry Obelisk Planter with the help of two people. Avoid attempting to erect the assembly in high winds and avoid breathing dust when handling the product.
- Please refer to the provided instruction sheet for a step-by-step guide to assembly. Keep in mind that certain items may not be shown to scale, and the components may differ from those shown in the instruction sheet due to ongoing product improvements.
- If you have any further questions or need assistance, please contact the Rowlinson Garden Products Limited Help Line during normal office hours at 01829 261 121.
Assembly Instructions
Before assembly
- We recommend that time is taken to read the instructions before starting assembly, then follow the easy step-by-step guide.
- The instruction sheet is only a guide to the assembly. Certain items may not be shown to scale.
- Check all components prior to assembly
- This product should be assembled by no less than two people.
- Never attempt to erect the assembly in high winds.
- It may be necessary to drill pilot holes for each screw.
- Biocidal Products Regulation EU 528/2012 Wolmanit® CX treated wood is a treated article that incorporates biocidal products: copper hydroxide carbonate/II/ and boric acid. They protect wood against fungal decay /rot/ and insect attack.
- Keep away from food, drink, and animal feeding stuff. Avoid breathing dust when cutting treated wood.
Recommended tools for assembly
- Power screwdriver
- Cross-head screwdriver bit
| No. | Components | Qty. |
|---|---|---|
| 1 | Planter base | 1 |
| 2 | Obelisk legs | 4 |
| 3 | Obelisk frame (220mm) | 4 |
| 4 | Obelisk frame (160mm) | 4 |
| 5 | Obelisk frame (100mm) | 4 |
| 6 | Cap | 1 |
| 7 | Finial | 1 |
| No. | Components | Qty. |
| --- | --- | --- |
| 8 | L-bracket | 4 |
| 9 | 50mm screws | 16 |
| 10 | 40mm screws | 12 |
| 11 | 16mm screws | 8 |
| 12 | Planter liner material | 1 |
Obelisk legs and frame
- Secure two legs together using one of each length frame as shown below. Secure the longer length frame at the bottom through the pre-drilled holes using 2 x 50mm screws. The middle and top frames are secured through the pre-drilled holes using 2 x 40mm for each frame. Create a second structure in the same way.
Join the two-leg sections
- Join the two-leg sections as shown below. Secure the longer-length frames at the bottom through the pre-drilled holes using 2 x 50mm screws per frame. The middle and top frames are secured through the pre-drilled holes using 2 x 40mm for each frame.
Cap and finial
Screw the cap to the top of the legs through the pre-drilled holes using 4 x 40mm screws. Align the dowel on the ball finial with the hole in the centre of the cap and push in firmly into place.
Secure obelisk to planter base
Position the obelisk onto the planter base, position an L-bracket under each
of the legs and carefully remove the obelisk. Secure each bracket to the base
using 1 x 16mm screw per bracket. Replace the obelisk and secure the brackets
to the obelisk using 1 x 16mm screw per bracket.
- We constantly improve the quality of our products, occasionally the components may differ from the components shown and are only correct at the time of printing.
- We reserve the right to change the specification of our products without prior notice.
- 2022 © Rowlinson Garden Products Ltd
- ROWLINSON GARDEN PRODUCTS LIMITED Green Lane
- Wardle, Nr. Nantwich
- Cheshire
- CW5 6BN
- Help Line (Normal Office Hours) 01829 261 121