MAYTAG PDBTT49AWW Built-In Dishwasher Instruction Manual

June 16, 2024
Maytag

MAYTAG PDBTT49AWW Built-In Dishwasher Instruction Manual

Installation Instructions

Instructions installation

ELECTRICAL REQUIREMENTS

This dishwasher is designed for operation on an individual 120 VAC, 60 Hz grounded electrical circuit. Use required fuse (15 amp) or comparable circuit breaker. Two wire with ground service to the dishwasher is recommended for connection at the terminal box for grounding

WARNINGWARNING

To prevent accidental contact with electrical connections, built-in dishwasher models must not be connected to a power source unless the dishwasher is completely enclosed, with front panels in place. If the back or either side of the dishwasher is exposed, a panel must be used to complete this enclosure. Failure to follow this warning could result in death or serious injury

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

WARNINGWARNING

To prevent the possibility of electrical shock, this dishwasher, as other electrical appliances, must be adequately grounded. It is the responsibility of the installer at the point of installation, taking into consideration local conditions and requirements. Failure to follow this warning could result in death or serious injury.

PLUMBING REQUIREMENTS

CHECK LOCAL PLUMBING CODES FOR APPROVED PLUMBING PROCEDURES AND ACCESSORIES. ALL PLUMBING SHOULD BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL CODES.

WARNINGWARNING

Disconnect electrical power to dishwasher before you start! Failure to follow this warning could result in death or serious injury

Installation Instructions
Installation Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions

Installation Instructions Installation
Instructions
Installation Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions
Attach waterline to hot water supply
Installation Instructions
Refer to local code
Installation Instructions Installation
InstructionsInstallation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions
Never route cord or hoses under motor

Installation Instructions
Installation Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
InstructionsInstallation
Instructions

Installation Instructions Installation
Instructions

Installation Instructions
If not level adjust feet
Installation Instructions      Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions Installation
Instructions
Turn on water, power and machine.
Installation Instructions
*Check for leaks, turn off machine
Installation Instructions Installation
Instructions
*Note: Maytag not responsible for water leaks at water and drainline connections.
Installation Instructions

Installation Instructions Installation
Instructions Installation
Instructions Instructions
installation Instructions
installation

Instructions installation

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals