Babysense BPIZ1 HD Baby Monitor Installation Guide

June 4, 2024
Babysense

Hub Model: BPIZ1
Quick Installation Guide

BPIZ1 HD Baby Monitor

Install Babysense Connect device as per User Manual Instructions
Supplied rechargeable batteries need to be fully charged before the first use!

Plug the Hub into an electrical outlet
Ensure that it is in the same room as the Babysense Control Unit and is within working range of your home WiFi network.

Babysense BPIZ1 HD Baby Monitor - caboulThe Hub connects to your home WIFI Network and supports the connection to the Babysense. Whilst connected it provides you with remote access from outside the house.
Download Babysense Connect App
From your mobile devices application store or by scanning the QR Code below

Babysense BPIZ1 HD Baby Monitor - QR code

https://download.babysensemonitors.com/babysense/jer

Follow the pairing instructions as prompted by the app
Once you have the application installed, it will establish the required WiFi connection from the Hub to your WiFi router, and a safe Bluetooth connection from the Hub to the Babysense Control Unit.

Babysense BPIZ1 HD Baby Monitor - app1 Connection Established
Now that you have successfully implemented the above steps- your installation is complete and you can start using the device!

Babysense BPIZ1 HD Baby Monitor - established

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.

FCC ID: 2AZL5-BPIZ1

Documents / Resources

| Babysense BPIZ1 HD Baby Monitor [pdf] Installation Guide
BPIZ1, 2AZL5-BPIZ1, 2AZL5BPIZ1, BPIZ1 HD Baby Monitor, HD Baby Monitor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals