babysense Prisma 5 HD Split Screen Video Baby Monitor User Manual

: July 31, 2024
: Babysense

Table of Contents

babysense Prisma 5 HD Split Screen Video Baby Monitor
Specifications
Product Overview
Warnings and Safety Instructions
Overview
Operating the Monitor
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

babysense Prisma 5 HD Split Screen Video Baby Monitor

Specifications

Product Name: Prisma 5 HD Split Screen Video Baby Monitor
Models: Prisma – 1 Camera, Prisma – 2 Cameras
Manufacturer: Hisense Ltd.
Website: www.babysensemonitors.com

Product Overview

Pack Contents

The package includes a Parent Unit and a Baby Unit (Camera) with
various features and components as listed below.

Parent Unit Overview

```
1. Power ON/OFF/SLEEP Button
```
Charging LED
Power LED

Baby Unit Overview

```
1. Infrared LEDs
```
Lens

Getting Started

Powering the Baby Unit (Camera)
Use the provided AC power adapter to power the Baby Unit.
Powering the Parent Unit
Charge and power on the Parent Unit using the provided charging port.
Charging the Parent Unit
Connect the Parent Unit to a power source using the charging port to charge the device.
Set Up
Follow the user manual instructions to set up the Baby Monitor for first- time use.

Operating the Monitor

Menu Icon Overview
The menu icons on the Parent Unit allow you to access various settings and features such as lullabies, temperature monitoring, and customer support.
Lullaby & White Noise Setting
Soothe your baby with pre-programmed lullabies and white noise available on the monitor. Follow these steps to use the lullaby feature:

```
1. Access the menu on the Parent Unit
```
Select a lullaby to play

Note: Ensure to follow safety instructions and precautions mentioned in the user manual for safe operation of the Baby Monitor.

Warnings and Safety Instructions

Follow these safety precautions to prevent fire, injury or damage to the product.
Read and keep instructions: It is very important that you read all the safety and operating instructions before the FirstWatch Video Monitor is operated.
Please retain your purchase receipt as you will need to produce it if warranty service is required.

WARNINGS

STRANGULATION HAZARD: Children can become entangled in cords. Make sure the Baby Unit, Parent Unit and mains adaptor cables are kept out of reach of your baby and other young children at all times, at least 6 feet away.
CHOKING HAZARD: This product contains small parts which may cause chocking. Exercise care when unpacking and assembling the product and keep the small parts away from children.
RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children.
DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Never place the Baby unit or Parent unit inside your baby’s crib, bed or playpen.
DO NOT HANDLE ROUGHLY, DROP OR THROW: FirstWatch video monitor is a high-quality electronic device which must be handled with care.
This product is designed for INDOOR USE ONLY.
WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or place the product in or near moisture or water.
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your video monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child.
POWER SOURCE: This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package.
VENTILATION: This product should not be used on a bed, sofa, rug or similar surface that may block the ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Never cover the product with clothes, towels, blankets or any other item.
THIS PRODUCT IS NOT A TOY: It should be kept out of children’s reach.
KEEP AWAY FROM SOURCES OF HEAT: This unit should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. The unit should not be left in direct sunlight.
BATTERY: Before you use the product, we recommend you fully charge the battery of the Parent Unit, so that it continues to work if you disconnect it from the power supply to carry it to another location.
INSTALLATION LOCATION: The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi−Fi routers, otherwise they could cause interference. If this occurs, move the baby and parent units to another location.
RANGE: Range of all baby monitors is always measured in an open space. The actual range may be shortened due to environmental obstacles (such as concrete walls).
DAMAGE REQUIRING SERVICE: This product should be serviced by qualified personnel only.
DO NOT TRY TO OPEN AND REPAIR THE PRODUCT: If you have any problems with the product, please contact the authorized distributor.
In case of unusual noises or smells originating from the device, immediately disconnect the product from the power outlet and contact authorized distributor.
If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care to not allow water into any openings.

IMPORTANT: FirstWatch Video Monitor is designed only for hearing the baby’s voice and seeing the images of the baby. This product is not a medical device and should not be used as a substitute for responsible adult supervision. It is important that you regularly check on your baby personally.

Safety Instructions for AC Power Adapter

The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
During continual use, the power adapters may become warm to the touch. This is normal and should not be a cause of concern.
Examine intactness of the power cord and its plug.
The adapter must be handled with care: do not handle roughly, drop or throw.
When removing the power adapter from the wall outlet, hold and pull from the receptacle.
Do not pull on the cable itself or bend the cable as that will put additional stress on the cable and could lead to damages.
Do not touch the power adapter with wet hands or allow liquids to spill on it.
Make sure the mains adaptor cables are kept out of reach of your baby and other young children at all times. To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib.
Do not replace the plugs or cable on your power adapter. This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package.
Never cut, damage or bend the power cord.
Do not put any objects on top of the power cord, which could cause overheating, damage, combustion and electrocution.
Do not leave the power adapter connected to the wall outlet when it is not plugged into the Baby or Parent Unit.

WARNING

Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution.
Do not place the AC adaptor cable in a high wear and tear location. Never use a frayed or compromised cord.
Intended for indoor use only.

Safety Instructions for Li-ion battery (Non removable pre-installed battery)

Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit.
Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, and seek medical assistance.
The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.
Use only the battery pack supplied with the product or the same type, sold by the manufacturer or its authorized distributors. Improper use or use of unapproved batteries may present a risk of fire, explosion, or other hazards, and may invalidate the warranty.
If you believe the battery is damaged, remove the product from the charger and stop using the product.
Never use a damaged battery.

Information on disposal of product
Always dispose of your product (with the non removable pre-installed battery) at the end of their life in an environmentally responsible way and in
accordance with your local waste disposal requirements.
All cardboard and paper packaging materials should be recycled in accordance with your local council waste regulations.
Thank you for choosing Babysense Video Monitor from Hisense Ltd.

Overview

Pack Contents

Parent Unit x 1
Baby Unit (Camera) x 1 (x2 in 2 camera model)
AC Power Adapter x 2 (x3 in 2 camera model)
Wall mounting screw set x 1 (x2 in 2 camera model)
User Manual x 1

Parent Unit Overview

Power ON/OFF/SLEEP Button
Charging LED
Power LED
Volume Level LEDs
Volume Up/Down Buttons
MENU/EXIT Button
Night Light
Menu Navigation Keys; Pan & Tilt Navigation Keys
OK/ZOOM Button
Camera Switch Button
Split Screen Button
Talk Back Button
Microphone
Speaker
Antenna
Stand
Charging Port
Baby Unit Overview
Infrared LEDs
Lens
Light Sensor (Night Vision)
Power LED
Microphone
Speaker
Night Light
Temperature Sensor
ON/OFF Switch
Charging Port
PAIR Button (On the Bottom)

Powering the Baby Unit (Camera)

Connect the Camera Power Adapter to the Charging Port (27) on the back bottom of the Baby Unit.
Plug the AC power adapter into the wall outlet.
Ensure the ON/OFF switch (26) is in the ON position.
The unit will power on automatically and the green power LED (21) will light up.
Use the ON/OFF switch (26) to turn the Baby Unit off.
NOTE: Only use the AC power adapter included in this package.

Powering the Parent Unit

The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
Connect the Parent Unit Power Adapter to the Charging Port (17) on the left side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Press and hold the Power button (1) on the top left side of the Parent Unit for 5 seconds to turn the unit on.
Once the Parent Unit is turned on, the green power LED (3) will light up and “FirstWatch” logo will display on the LCD.
Press and hold the Power button (1) on the top left side of the Parent Unit for 5 seconds to turn the unit off.
NOTE: Only use the AC power adapter included in this package.
NOTE: The Parent Unit is supplied with a built-in rechargeable Li-ion battery (3.7V, 4000 mAh).
We recommend whenever possible, keep the Parent Unit plugged in to keep the battery charged.

Charging the Parent Unit

Connect the power adapter to the Charging Port (17) on the left side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Charging LED (2) on the Parent Unit will light up in RED to indicate charging.
When the unit is turned on, the battery charging icon will appear at the top right corner of the LCD screen.
Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating the battery is fully charged. The charging LED (2) will turn red while the battery is charging. The charging LED (2) will turn green once the battery is fully charged.
NOTE: Before the first use or after a long product storage, it is recommended to fully charge the Parent Unit prior to operating the monitor. It takes approximately 8 hours to fully charge the battery.
NOTE: The monitor can be operated normally during the charging process.
NOTE: Low Battery Warning – The battery icon turns red on the LCD screen to indicate that the battery is low. The warning is accompanied with an acoustic beep sound, indicating that the battery needs to be recharged.
Alert Volume can be adjusted in the Parent Unit menu, see details in the section Warning Alert Volume Setting”.

Set Up

Once both the Baby and Parent Units are switched on, the display on the Parent Unit will show the video captured by the Baby Unit(s).
Baby Unit(s) are paired to the Parent Unit when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the
Parent Unit. To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure described in “Section: Pairing the Baby Unit (Camera) with the Parent Unit”.
The Baby Unit should be placed at least 6 feet away from the baby’s crib on a flat surface. Alternatively, it can be wall mounted.
Never place the Baby Unit inside the crib, bed or playpen.
Make sure the unit and cords are out of reach of the baby and other young children.
To avoid a strangulation hazard, the power cords should be secured and never hung on the crib or near the baby.
Place the baby monitor in a place where the air can circulate freely and avoid blocking the ventilation and speaker openings.
Aim the camera (s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.
To use your Parent Unit and Baby Unit together, you must be able to establish a radio link between them; the range may be affected by environmental conditions/obstacles (See more details in Troubleshooting Section – “Interference or poor reception”)