babysense 7 Original Non Contact Baby Breathing Monitor User Manual

September 4, 2024
Babysense

7 Original Non Contact Baby Breathing Monitor

Product Information

Specifications

  • Product Name: Babysense 7
  • Type: Non-contact baby breathing monitor
  • Warranty: 2-year limited warranty

Product Usage Instructions

Installation

  1. Ensure the monitor is placed in a suitable location within the
    baby’s room.

  2. Do not use the Babysense with co-sleepers attached to the
    parent’s or caregiver’s bed.

  3. Make sure the monitor is positioned correctly and
    securely.

Maintenance

Regularly check the monitor for any signs of damage or
malfunction. Do not attempt to repair the monitor yourself; contact
customer support for assistance.

Warranty Information

The Babysense 7 comes with a 2-year limited warranty. For
warranty claims, contact Hisense Ltd. customer support at
support@babysensemonitors.com

FAQ

Q: Can the Babysense 7 be used with co-sleepers attached to the

parent’s bed?

A: No, the Babysense 7 cannot be used with co-sleepers that are
attached to the parent’s/caregiver’s bed.

Q: What should I do if the monitor needs to be moved or the

crib/bed position changed?

A: When moving the monitor or changing the bedding/crib
position, ensure that the monitor is repositioned correctly and
securely.

Q: What is covered under the limited warranty?

A: The limited warranty covers defects in material and
workmanship for a period of 2 years from the date of purchase.
Hisense Ltd. will repair or replace any defective product within
this period.

Babysense 7
The original non-contact baby breathing monitor
User Manual

ENG
Babysense 7
The original non-contact baby breathing monitor
Babysense cannot be used with co-sleepers that are aached to the parent’s/caregiver’s bed.

ENG

ENG
Due to the high sensivity of Babysense Connect, fans, wind (open windows), air condioning, any cause of airflow and other similar environmental devices and/or acvies can influence it. Such environmental effects could be picked up by the sensors on a similar level to that of breathing movements, thus prevenng or delaying alarm acvaon. If the Babysense / Babysense Connect is used with other devices simultaneously, it is required to conduct the daily performance test (See Daily Performance Test Secon) while all used devices are “ON”. Please mimic the environment exactly as per the baby’s sleeping arrangements with the baby out the crib; if room sharing please test with the sibling in their bed, if using a non-aached co-sleeper please ask a caregiver to lie on the bed etc. Under such condions, it is required to verify that the acousc and visual alarms of Babysense are acvated.
Do not conduct performance test by picking the baby up out of the crib/bed and waing for the alarm to sound. Please ensure the test is conducted in the same condions and environment as baby’s sleeping arrangements (see above Environmentally Caused Malfuncon) · The performance test should be conducted while the baby is
not in bed. · Turn device on and take two steps away from the bed. · Ensure the alarm goes off within 20-seconds (due to absence
of breathing movements). · The alarm may sound with or without preliminary cking. · Check that the alarm can be heard in all locaons throughout
the home or place of care. · In case the alarm does not sound, within 20-seconds, refer to
Troubleshoong secon. · Performance test must be conducted daily and every me you
move the monitor, change the bedding or relocate crib/bed posion.

No. Symbol 1. 2. 3. 4. 5. 6.

Description

ENG

No.

Symbol

Description

14 7.

8. 9. 10.

ENG

ENG
LIMITED WARRANTY
THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. This product will be free from defects in material and workmanship for a period of 2-years from the date of purchase following the original retail purchase, (the “Warranty Period”).
If the Product fails to conform to this Limited Warranty during the Warranty Period, Hisense Ltd. will at its sole discretion, either (a) repair or replace any defective product at no cost, or (b) accept the return of the product and refund the money actually paid by the original purchaser for the product. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the remaining Warranty Period.
This Limited Warranty does not apply to product that has been damaged as a result of improper maintenance or other misuse.
product.
WARRANTY CLAIMS
If you wish to make a claim under this warranty, please contact Hisense Ltd. customer support at: support@babysensemonitors.com
DISCLAIMER OF WARRANTIES
EXCEPT AS STATED ABOVE, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HISENSE DISCLAIMS ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES AND CONDITIONS WITH RESPECT TO THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HISENSE ALSO LIMITS THE DURATION OF ANY APPLICABLE IMPLIED WARRANTIES OR CONDITIONS TO THE DURATION OF THIS LIMITED WARRANTY.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals