babysense V.HDSee.05_UG_09.23 1080P Wifi Camera Instruction Manual

June 16, 2024
Babysense

babysense V.HDSee.05_UG_09.23 1080P Wifi Camera

Warnings and Safety Instructions

Follow these safety precautions to prevent fire, injury or damage to the product.
Read and keep instructions: It is very important that you read all the safety and operating instructions before the Babysense See+ Camera is operated.
Please retain your purchase receipt as you will need to produce it if warranty service is required.

IMPORTANT:

  • STRANGULATION HAZARD: Children can become entangled in cords.
    Make sure the Camera power adaptor cable is kept out of reach of your baby and other young children at all times.

  • CHOKING HAZARD: This product contains small parts which may cause choking. Exercise care when unpacking and assembling the product and keep the small parts away from children.

  • RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children.

  • DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Never place the Camera inside your baby’s crib, bed or playpen.
    DO NOT HANDLE ROUGHLY, DROP OR THROW: Babysense See+ Camera is a high- quality electronic device which must be handled with care.
    This product is designed for INDOOR USE ONLY.

  • WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or place the product in or near moisture or water.

  • THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your Babysense See+ Camera is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child.

  • POWER SOURCE: This product should only be used with the AC power adapter supplied by the manufacturer, as included in this package.

  • VENTILATION: This product should not be used on a bed, sofa, rug or similar surface that may block the ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Never cover the product with clothes, towels, blankets or any other item.

  • THIS PRODUCT IS NOT A TOY: It should be kept out of children’s reach.

  • KEEP AWAY FROM SOURCES OF HEAT : This unit should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. The unit should not be left in direct sunlight.

  • DAMAGE REQUIRING SERVICE: This product should be serviced by qualified personnel only.

  • DO NOT TRY TO OPEN AND REPAIR THE PRODUCT: If you have any problems with the product, please contact the authorized distributor.

  • In case of unusual noises or smells originating from the device, immediately disconnect the product from the power outlet and contact authorized distributor.

  • If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care to not allow water into any openings.

IMPORTANT: This product is not a medical device and should not be used as a substitute for responsible adult supervision. It is important that you regularly check on your baby personally.

Safety Instructions for AC Power Adapter

  • The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
  • During continual use, the power adapters may become warm to the touch. This is normal and should not be a cause of concern.
  • Examine intactness of the power cord and its plug.
  • The adapter must be handled with care: Do not handle roughly, drop or throw.
  • When removing the power adapter from the wall outlet, hold and pull from the receptacle.
  • Do not pull on the cable itself or bend the cable as that will put additional stress on the cable and could lead to damages.
  • Do not touch the power adapter with wet hands or allow liquids to spill on it.
  • Make sure the mains adaptor cables are kept out of reach of your baby and other young children at all times. To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib.
  • Do not replace the plugs or cable on your power adapter. This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package.
  • Never cut, damage or bend the power cord.
  • Do not put any objects on top of the power cord, which could cause overheating, damage, combustion and electrocution.
  • Do not leave the power adapter connected to the wall outlet when it is not plugged into the Camera.

WARNING:

Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution.
Do not place the AC adaptor cable in a high wear and tear location. Never use a frayed or compromised cord.

Information on disposal of product

Always dispose of your product (with the non removable pre-installed battery) at the end of their life in an environmentally responsible way and in accordance with your local waste disposal requirements.
All cardboard and paper packaging materials should be recycled in accordance with your local council waste regulations.

Thank you for choosing Babysense See+ from Hisense Ltd.

Overview

Pack Contents

  • Camera x1

  • USB cable x1

  • AC adaptor x1

  • Wall mounting set x1

  • Position paper x1

  • User manual x1

  • Micro SD

Camera Overview

Getting Started

Powering the Camera

  • Connect the USB Cable to the AC Adapter and insert into electrical outlet.
  • Connect the USB Cable into the camera.
  • Ensure the camera has power.

Downloading The App

  • Scan QR Code

  • Install Babysense Smart Nursery app.

  • Follow app steps to complete the camera connection

Set Up

  • Place the Camera in a place where the air can circulate freely and avoid blocking the ventilation and speaker openings.
  • Aim the Camera to best optimize the viewing area: Select a location for the Camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
  • For installation on the wall (optional), remove the positioning paper and paste it to the selected location.
  • Use supplied mounting screws to secure camera to the wall.

Maintenance

  • All of the following maintenance procedures should only be performed when the Camera is unplugged and off.
  • Clean the surface of the Camera with a soft, fluff-free cloth. Never use cleaning agents or solvents.
  • If the Camera gets dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into any openings.

Specifications

Product Model IP206
Frequency 2.4GHz WiFi
Input Voltage 5V, 1.0 A
Power Adapter Input : 100-240VAC 50 / 60Hz, 200mA Max;

Output : 5V, 1.0A;
Operation Environment| Indoor use only; Temperature: 32-104°F / 0-40°C Humidity: 5% to 90% rh. (relative humidity

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statements

This device complies with Industry Canada license-exempt RSS standard(s):
Operation is subject to the following Two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Term

We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our customer service: support@babysensemonitors.com

Customer Support

If you have any further questions about using the product, please contact us via:

Email – support@babysensemonitors.com
US Toll-Free number833-568-2229 (USA ONLY)
Website – www.babysensemonitors.com

IMPORTANT: Please retain your purchase receipt and attach to the back page of this user manual as you will need to produce this if warranty service is required.

Image for illustration purposes only

For any product related question please contact us at: support@babysensemonitors.com www.babysensemonitors.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals