JONARD TOOLS AHC-10 Adjustable Hole Cutter Instruction Manual

June 1, 2024
JONARD TOOLS

JONARD TOOLS AHC-10 Adjustable Hole Cutter

JONARD TOOLS AHC-10 Adjustable Hole Cutter

IMPORTANT INFORMATION

The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects. This adjustable hole cutter features the following:

  • Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2.7 cm) thick
  • Cutting depth is adjustable via hex locknut and compression spring
  • Cuts hole sizes from 2.2” (55 mm) to 10” (254 mm)
  • Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting
  • Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris
  • Compression spring absorbs vibrations while cutting
  • Can be used with any variable-speed drill
  • Includes rugged carry case
  • Power drill not included with hole cutter
  • Lifetime Warranty

SPECIFICATIONS

CUT TYPE Round Hole
WORKS ON Plywood, Sheetrock, Plasterboard, Acrylic Sheet
CUTTING DIAMETER RANGE 2.2”-10” (56 mm-256 mm)
MAXIMUM CUTTING DEPTH 1.1” (27 mm)
BIT DIAMETER 0.236” (6.0 mm)
BIT LENGTH 1.70” (43.27 mm)
BIT MATERIAL Steel
HEX CHUCK SIZE/ARBOR SIZE 3/8” (9.53 mm)
DIMENSIONS 13.5” x 4.6” x 14.1” (342 mm x 118 mm x 360 mm)
PRODUCT MATERIAL Steel
WEIGHT 2.53 lb(1148.62 g)
UPC # 811490017764

Customer Support

Tel 914.793.0700 | Fax 914.793.4527 |jonard.com

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

JONARD TOOLS User Manuals

Related Manuals