COMVISION Visiotech VC-1 PRO Badge Camera User Manual
- June 12, 2024
- COMVISION
Table of Contents
Visiot VC-1 PRO
Quick Start Guide
Comvision Pty 08-2023
Visiotech VC-1 PRO Badge Camera
Product Design
Button Settings
On/Off
Press and hold the power button for 3 seconds to turn the device on. Press and
hold the power button for 3 seconds to turn the device off.
Start/Stop Recording
Press the Video Record button to start the video recording, press it again to
stop.
The VC-1-Pro will beep to confirm the button presses.
Red Video Record LED:
- Red LED On: Indicates the device is not recording.
- Red LED Flashing: Indicates the device is recording.
If the device is connected to the Wi-Fi App, recording can be controlled via
an Android smartphone.
If the VC1-Pro is programmed to record on startup, the camera will beep once
powered and then start recording automatically. To stop recording, press the
Video Record button.
Photo Snapshot
Press the Photo button to take a picture when the device is powered on. The
VC-1-Pro will beep twice to confirm the button press and the photo capture.
If the device is connected to the Wi-Fi App, Photos can be controlled via an
Android smartphone.
Extra Modes
Record on Start-up: When enabled, the VC-1-PRO will automatically start
recording after the camera powers up.
DashCam Mode: When enabled, the VC-1-PRO turns on and starts recording
automatically when power is connected to the camera via the USB port.
The camera will also automatically turn off when power is removed. In DashCam
Mode, the camera should power on and off with your car when plugged into the
correct car socket
Retrieving Footage
Windows Application
Download the Visiotech VC-1-PRO CamManager from the Comvision Website and
install it.
Plug the camera into the Windows PC using the USB-C cable provided. Start the
VC-1-PRO CamManager Software Enter your password to unlock the camera (Default
password is: 000000)
Videos & Photos
Once the software has unlocked the camera it will automatically load the
cameras video files into the video tab and the cameras photos into the images
tab. Click on the respective tabs to move between Videos and
Images.
Double-click on the file you want to view. Media
controllers are at the bottom of the window to control video files.
To save footage from the camera to your PC, select the files in the playlist
and then Click the Save button, you will then be prompted to select the save
location.
To delete files from the camera, select the files in the playlist and right-
click to delete. You will then be prompted to confirm the delete.
Button functions
| Item | Operation | Function |
|---|---|---|
| Power button | Holding (long press) | Power On/Off |
| Quick (Short press) | Take Photo | |
| Recording button | Holding (long press) | Turn ON/Off WiFi |
| Quick (short press) | Start/Stop Recording | |
| Reset | Short press with pin | Reboots camera |
Audio Sounds
| Power On | Long beep |
|---|---|
| Key tone | Short beep |
| Power off | Long beep |
| Low Battery | Short beep |
Light and Sound Indicator
Functions| WIFI Indicator (Blue)| Status Indicator (Red)|
Charging Indicator (Red)
---|---|---|---
Light position| Video button| Video button| Power button
Charging when device powered off| | On
Device will power on with a long beep| On
Device will power on with a long beep
Charging when device powered on| | On
With long beep| On
With long beep
Charging Finished| | On| Off
Standby| | On
With long beep| Off
Photo taking| | Flash Twice
With two beeps| Off
Video recording| | Flashing slowly
With short beep| Off
WiFi on, disconnected| On
With 3 short beeps| |
WiFi Connected| On| |
Android Wi-Fi APP
APP Download
Download and install the Android App by scanning the QR code below:
https://www.comvision.net.au/wp-
content/uploads/Visiotech_VC-1-PRO.zip
Turning the Wi-Fi Camera hotspot On
& Off
Pressing the Video Record button for 3 seconds will turn the cameras Wi-Fi hot
spot On or Off while the device is in standby mode.
The Video Record button LED will turn Blue to indicate Wi-Fi is turned on.
Connecting the APP to VC-1-PRO Camera
-
Press the Video Record button for 3 seconds.
-
The Video Record button LED will turn Blue to indicate Wi-Fi is on.
-
Start the “VC-1” Android App on your Android phone.
-
Click “Connect Your Device”
-
This loads the phones Wi-Fi network options including the VC-1 Pro
-
Select the VC-1 Pro which will be named “wifi_camera_c1j_xxxxxxxx”
• Default Wi-Fi password is 1 23 4 5 6 7 8 9 0 -
Press the back button to return to the VC-1 Pro App
-
The VC-1 Pro App will connect to the cameras and start live streaming.
-
VC-1-PRO App users can then:
• Stream live video
• Display recorded files and download the files to the phones Gallery
• Start and stop recording from the App
• Take a photo from the App
• The time and date on the camera is automatically updated from the App on connection.
• Camera settings can be changed from the settings page.
For more details refer to the Visiotech VC-1 Pro User Manual.
Warranty and Returns
- Camera has 12-month warranty from date of purchase.
- This warranty does not extend to product subjected to misuse, neglect, accident, water, and moisture.
- For product return contact your reseller.
Unit 6, 15-17 Chaplin Drive, Lane Cove West, NSW 2065
PO Box 1005, Crows Nest NSW 1585, AUSTRALIA
Sydney: (02) 9906 4455
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>