SEALEY 201 Standard Goggles Indirect Vent Instruction Manual

SEALEY 201 Standard Goggles Indirect Vent

Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• This product is designed for face and eye protection against high speed particles of low energy impact. The visor is designed to be lightweight and comfortable to wear.
• The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating a hazard to the wearer.
• Avoid liquids as small particles can splash into the eyes.
• Inspect the goggles frequently as a pitted or scratched face shield reduces vision and should be replaced immediately.
• DO NOT use if any part of the goggles is cracked or broken.
• DO NOT place this product on a hot surface.
• DO NOT use these goggles for protection against short circuit electric spark, fine dust, gas, ultra violet or infra red radiation, ionising radiation, liquids under pressure or other severe hazards.
• DO NOT use these against heavy impact hazards.
• DO NOT use these goggles for welding.

INTRODUCTION

Clear polycarbonate safety lens with indirect ventilation in the frame. Conforms to BS EN 166/1B.

SPECIFICATION

• Model No: ……………………………………………………………… 201
• Lens Type: …………………………………………………………… clear

ASSEMBLY

NOTE: It is imperative that the goggles fit well and comfortably for the user or else slippage and discomfort may arise.
Adjust the headband by pulling/loosening the headband through the buckle.

CLEANING & DISINFECTION

• DO NOT USE abrasive materials.
• Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
• Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals. The contact areas should be disinfected regularly.

MAINTENANCE

• The googles should be periodically inspected and cleaned to keep it clear. In case damage or damage to the goggles, please replace.

STORAGE
Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment. Use original bag for transportation if possible.

SHELF LIFE/EXPIRY DATE
Product shelf life/expiry date is 5 years from date of manufacture.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534
[email protected]
www.sealey.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>