Fontastic 262142 Magnetic Wireless Charging Car Holder User Manual
- June 4, 2024
- fontastic
Table of Contents
Magnetic Wireless Charging
Car Holder WMag
User Manual
Dear Customer, Thank you for purchasing this magnetic car smartphone holder with a wireless charging function. This instruction manual is designed to familiarize you with the operation of this product.
Please read this instruction manual and follow the listed safety instructions and tips. Keep this manual so that you can access it at any time.
Package Contents:
- Smartphone mount
- Ventilation grille mount
- Magnetic metal plate
- USB charging cable
- Instruction manual
Overview:
- ventilation grille mount
- ball joint
- magnet
- charging area
- status LED
- USB Type-C connector
Status LED
- Standby: Red
- Charging: Green
- Fully charged: Blue
- Error: Flashing
NOTE: Errors such as overcurrent, overvoltage, Undervoltage, overtemperature, and non-QI capable devices are indicated by flashing LED.
Mounting
Unscrew the cap nut on the back of the smartphone mount. Place the cap nut
over the ball head of the ventilation grille mount (Fig.1). Insert the ball
head into the holder of the smartphone mount. The ball head must audibly
engage. Tighten the union nut clockwise (Fig.2).
Press the spring clamp of the ventilation grille holder to open its clamps.
Keeping the clamp pressed, insert the bracket to the slats of the ventilation
grille. Release the spring clamp (Fig.3).
Charging devices
The charger is suitable for wireless charging of Qi-enabled devices. To do so, connect the USB Type-C plug of the included USB cable to the charger, and the USB plug to a car charging adapter. The red LED on the charger lights up to indicate that the device is ready for charging. Place your MagSafe compatible smartphone with its back on the cradle (Fig.4). Once the smartphone is placed, charging will start.
NOTE: To charge non-MagSafe compatible smartphones, use the self-
adhesive, magnetic metal plate included in the scope of delivery to stick to
smartphones or their protective cases. Please note that thicker protective
covers can impair wireless charging. When attaching the metal plate, make sure
that it is not stuck to the position of the induction coil in the smartphone.
Charging via induction is then not possible!
NOTE: For fast charging up to 15 watts, you need a fast-charging USB
charger with 9 volts or 12 volts output voltage.
ATTENTION! Please note that the cradle heats up during the charging
process and can become hot. The temperature will rise if you have the device
in use while charging. If it overheats, the charging process stops
automatically. Do not use the cradle again until it has cooled down.
Safety instructions:
- Never open the device.
- Do not immerse the device in water and protect it from moisture.
- Never connect the device by force.
- Unplug electronic equipment when not in use for an extended period of time.
- Make sure that the product is powered by an automotive USB charger that is easily accessible so that you can quickly disconnect the device from the power source in case of an emergency.
- Do not place cards with magnetic strips, magnetic recording media, or metal objects on the charging surface. Charging will not occur and may result in overheating, as well as loss of data and unusability of the cards.
- Wearers of pacemakers should keep a sufficient distance between the charger and the pacemaker. In case of doubt, consult your physician.
- This product may impair the function of medical equipment. Therefore, do not use it in clinics and medical facilities.
- Never use the product if it shows visible damage.
- Technical changes and errors excepted
No liability will be accepted for damage in the event of incorrect operation!
Technical data
- Magnetic ventilation grille holder
- Material: ABS + PC
- Input: DC 5.0V/2.0A, 9.0V/1.67A, 12V/1.5A
- Output: DC 5.0V/1.0A, 9.0V/1.0A, 9.0V/1.5A
- Total power: Max. 15.0 watts
- Supports MagSafe technology
- Safety: Short circuit protection, overcharge and discharge protection, foreign object detection
- USB charging port
- Status LED
- Dimensions: 100 x 64.5 x 34mm
- Weight: 59g
If you need technical support, please contact our support team by email at service@fontastic.eu.
We hereby declare that this device bears the CE marking in accordance with the regulations and specifications. It, therefore, complies with the essential requirements of the EMC Directive 2014/30/EU, as well as the RoHS 2 2011/65/EU Directive. Please visit www.d-parts.de/Konfo for the complete Declaration of Conformity.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EC in the national
legal system, the following applies: Electrical and electronic devices may not
be disposed of with domestic waste. Consumers are obliged by law to return
electrical and electronic devices at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details of
this are defined by the national law of the respective country. This symbol on
the product, the instruction manual, or the package indicates that a product
is subject to these regulations. By recycling, re-using the materials, or
other forms of utilizing old devices, you are making an important contribution
to protecting our environment.
Improvements and changes to the technical specifications and other data could
be made without prior notice.
Registered trademarks are the property of their respective owners.
Fantastic, by D-Parts GmbH
Birkenweiher Str. 16 ● 63505 Langenselbold, Germany ●
www.d-parts.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>