Fontastic 260841 Fitness Tracker 165CH Calor Instruction Manual
- June 6, 2024
- fontastic
Table of Contents
Fontastic 260841 Fitness Tracker 165CH Calor
Thank you for purchasing the FontaFit 165CH Calor. Please read the operating instruction carefully and follow the instructions and notes to get the most out of your Fitness Tracker.
Package Content
- Fitness Tracker FontaFit 165CH Calor
- Bracelet
- This manual
Overview
- Lower wristband fixation
- Touch sensitive button
- 0.96″ TFT display
- Housing
- Upper wrist fixation
- USB charging connector
- Optical sensor
- Temperature sensor
Charging the battery
The FontaFil 165CH Calor is equipped with a rechargeable Lithium-Polymer battery. Fully charge the FontaFil 165CH Calor prior to putting the device into operation for the first time. Insert the USB charger plug of the tracker into a USB power source; a battery symbol appears in the display; the battery is charging. Charging lime is approximately 1-2 hours, depending on the battery charge level. When the unit is fully charged, the display changes. Once the tracker is fully charged, remove it from the power source.
Attaching the bracelet
Place both sides of the bracelet on the 165CH Calor fixings and slide them
towards the case until they stop.
Installing the app
Download and install the “FontaFit plus” app by scanning the QR code or follow
the link:
(URL: www.fontastic.eu/fontafit_plus)
Note: The Android app requires Android 4.4 or later.
The iOS app requires iOS 9 or later.
Connecting and using the app
Note: Your Fontastic® Fitness watch 165CH Calor must be connected to your mobile phone via the app (FontaFit Pro). Do not connect the fitness watch and your smartphone directly via the Bluetooth® function of the smartphone.
If the pairing has already been made directly via Bluetooth®, 165CH Calor must
first be deleted from the Bluetooth® directory of connected devices on the
smartphone.
Pairing must be carried out via the FontaFit Pro App as described below.
- Activate Bluetooth® on your smartphone.
- Switch on the Fitness tracker, start the FontaFit plus App and select ,,ADD” in the ,,Settings” section. Once the ,, 165CH Calor” is in the list, select it and wait until the connection is established.
- In the ,,Profile” section under ,,Profile settings” you can enter your data such as gender, height, weight etc.
Note: You can only connect one Fitness Tracker via the app. The use of
multiple Fitness Watches on one smartphone at the same time is not supported.
Note: The personal data is used to calculate the calorie consumption and
distance correctly.
Switching on/off
To switch on, press and hold the key for 6-8 seconds; FontaFit 165CH Calor
switches on.
To switch off, press the key repeatedly until the menu ,,MORE” appears. Press
and hold the key for about 3 seconds to open the menu and scroll through the
menu until the symbol @appears.
Now press and hold the key until the tracker switches off.
Display
FontaFit 165CH Calor has a colour display which shows the date, lime, connection to the smartphone, steps taken, pulse, blood pressure, blood oxygen, calories burned, body temperature and notifications.
Note: Date and time are only updated after connection to the smartphone. Manual setting is not possible.
- Connection
- Date
- Time
- Battery charge level
- Steps
There are 2 watch faces lo choose from. You can set these in the menu under ,,More”.
Activating the submenu
Press the key to scroll through the main menu.
Press and hold the key for about 3 seconds lo open the sub-menu for the main
menu item displayed (if available).
In a sub-menu, press and hold the key for approx. 3 seconds lo confirm your
selection or lo return to the main menu.
Menu navigation
Date/Time
Steps – calories, distance
BPM – pulse, blood pressure, oxygen
Body temperature
Sports – Running – time, calories / rope skipping – time, calories / sit-
ups – time, calories
Message
More – Camera, Find, Watch face, Reset, QR Code, Power off/MAC
Steps
Touching the menu item ,,STEPS” displays the number of steps. If you press and
hold the key for 3 seconds, the calories and distance are also shown.
Sleep
You can find sleep analysis data in the FontaFit plus App in the ,,SLEEP”
section.
Note: The sleep analysis is active from 20:00 to 10:00. It is not possible to record a sleep analysis during the day.
Pulse
By opening the menu item ,,BPM” the pulse measurement, measurement of blood
pressure and blood oxygen is started.
Temperature measurement
By opening the menu ,,Temp” and touch the sensitive button (2) the body
temperature measuring will start.
Please note: Wear the bracelet approx. 1 cm above your wrist bone and make sure it is close to your skin. Please note that other factors can lead to measurement inaccuracies:
- Low blood circulation
- Tattoos
- Uneven or jerky movements
- Sunscreen and other lotions
- Dirty sensor
Note: By using optoelectronic pulse measurement (photoplethysmography), in which your blood flow is detected by green LEDs and photo diodes, FontaFit also displays values when the bracelet is worn too loosely or not worn at all. For this reason, make sure that the wristband fits correctly when measuring your heart rate.
Note: This is not a medical device: Data from the Step, pulse, blood pressure, body temperature and oxygen saturation functions are not intended to be used for medical purposes.
Training
Some sports are pre-programmed in the ,,SPORTS” menu. Press and hold the key
for about 3 seconds to enter the sub-menu. There you can choose between
running, skipping and sit-ups. You can stop activities by tapping and holding
the key.
Notifications and incoming phone calls
Notifications or incoming calls are displayed directly.
You can display the latest notifications in the .. Message” menu.
Note: In the FontaFit plus app in the ,,Settings” section under ,,Notifications”, you must first approve the notification of the 165CH Calor in the respective message app.
Other menu items
If your 165CH Calor fitness watch is connected to your smartphone and within
reach, the following additional menu items are available:
• Smartphone camera Shutter
• Mobile phone finder
• Reset
• QR code to download the FontaFit plus app
• Power off/display MAC address
Safety advice:
- Do not open the device
- Do not use the device when it has visible defects.
- The device is water-resistant, not waterproof. Further information on water resistance can be found on our website www.fontastic.eu.
Technical Data
- Transmission: BT 4.2
- Display: 0.96 inch TFT
- Battery: Li- Polymer 90 mAh
- USB charger plug
- Operating time: 4-6 days
- Standby time: 15 days
- Splash water protection: IPX7
- Weight tracker: 23 g
- Material bracelet: TPU
FAQ
If you have any questions about the fitness watch or the app, please have a look at the FAQ section of our website www.fontastic.eu/faq?fontafit, or scan the adjoining QR Code.
If you need technical support, please contact our support team under support.fontastic.eu.
Registration and Safety
Certification/General Information
We hereby declare, that this device carries the CE mark in accordance with the regulations and standards. II conforms with the fundamental requirements of the (RED) 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following address: www.d-parts.de/konfo
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the
national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details of this are defined by the national law of
the respective country. This symbol on the product, the instruction manual or
the package indicates that a product is subject to these regulations. By
recycling, reusing the materials or other forms of utilising old devices, you
are making an important contribution to protecting our environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>