Fontastic Eris6 Power Bank User Manual
- June 5, 2024
- fontastic
Table of Contents
Eris6 Power Bank
User Manual
Please read these instructions carefully before using the device.
Package contents:
- Fantastic® power bank Eris
- Micro-USB cable
- User manual
Overview
- Micro USB input
- Battery level indicator
- On/Off button
- USB outputs
- LED light
Start-up procedure
Charge power bank
The Fontastic ® Powerbank Eris is equipped with a rechargeable battery.
Connect the powerbank via the micro USB cable which is included. The cable can
be connected to any charger with USB output or a computer. The battery level
indicator (2) flashes during charging. When fully charged, the indicator is at
100%. The charging process is completed. Disconnect the power bank from the
charger.
Note: Fully charge the power bank before using it for the first time.
The usual charging time is approx. 3 hours, but this may vary depending on the
used USB charger.
Check the battery level of the power bank
To check the battery level, press the On/Off button (3). The LED indicator
lights up for a few seconds and shows the battery level of the powerbank in
25% steps. 100% means that your powerbank is fully charged, and 25% means that
it is almost empty.
Charge devices using the power bank
To charge devices using the power bank, simply connect the charging cable to
one of the two USB ports (4) of the power bank. The charging process will
start. Remove the cable from the power bank after use.
Note: When using both USB ports at the same time, the available current
will be shared. Consult the device manual to determine the power consumption
required.
Note: If there is a short circuit while charging a device, the power bank
will turn off. Plug the micro-USB cable into the power bank Micro-USB input,
and connect the USB plug on the cable to a USB charger or computer. A short
charge pulse is sufficient to reactivate the power bank.
LED Light
To turn on the power bank LED light, press the power button(3) twice.
To turn off the power bank LED light, press the On/Off button(3) twice.
In case you need technical support, please contact our support team by e-mail
at service@fontastic.eu.
Technical data:
- Input: 5V DC 2A
- Output: 5V DC 2A
- Capacity: 6.000 mAh Li-Polymer
- 2 x USB-A port
- Micro USB input
- LED charge level indicator
- LED light
- Dimensions: 138 x 63 x 22 mm
- Weight: 231g
Safety advice:
- Do not open the device
- Do not hold the device underwater
- Keep it safe from humidity
- Do not connect the power output to the power input or vice versa
- Do not connect the adapter to the device by using force
- Keep the device away from children
- Disconnect electronic devices from the power when not using them for a longer time.
- Do not use the device when it has visible defects.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>