JAYBIRD VISTA 2 Noise Cancelling True Wireless Earbuds User Manual

JAYBIRD VISTA 2 Noise Cancelling True Wireless Earbuds

IN THE BOX

PRODUCT OVERVIEW

FIT

For an assisted fit set up, please download the Jaybird App or visit www.jaybirdsport.com/support/vista2

Your Vista 2 earbuds are fitted with size 2 (medium) eargels out of the box. They are marked ‘L’ and ‘R’ for the left and right ear.

Place the earbuds firmly within your ears as shown in the illustration.

If your earbuds are not comfortable, feel loose, or too tight try alternative sized eargels (size 1 or size 3).
Be patient, it may take some time to get the perfect fit.

It is quite common to use different sized eargels in each ear.

CHARGING

EARBUDS

Jaybird Vista 2 offers you up to 8 hours of playback when fully charged. The charging case gives you two additional recharge cycles or 16 hours additional playback.

Your earbuds will start charging as soon as you place them into the charging case and close the lid. The charging case LEDs will indicate the charging status:
Left / Right LED is pulsing white = Earbud is charging
Left / Right LED is solid white = Earbud is fully charged
A 5 minute charge gives you up to 1 hour of playback.
A full charge of the earbuds can take up to 2 hours if charging them from a discharged state.

CASE

It takes about 3 hours from a fully discharged state to charge your case.

With the case closed, connect the USB-C charging cable to the front of the charging case. The case LED will indicate the charging status:
Central LED is pulsing white = The case is charging
Central LED is solid white = The case is fully charged

WIRELESS CHARGING

CASE

It takes about 4 hours from a fully discharged state to charge your case.

With the case closed, place the case on the wireless charger mat with the LED light on the front of the case pointing towards you.
The case LED will indicate the charging status:
Central LED is pulsing white = The case is charging
Central LED is solid white = The case is fully charged

• Wireless charging pad is not included in the box. Use any wireless charger that functions as a Qi wireless charger.

PAIRING

To pair to a Bluetooth audio device follow the steps below

1. Place both earbuds into the charging case and close the lid.
2. Open the charging case and press and hold the case button until the case LED starts blinking white.
3. On your Bluetooth audio device, go to Bluetooth settings and select ‘Jaybird Vista 2’. Once connected, the charging case LED will turn off.

CONTROLS

ON/OFF

AUTO POWER OFF
Placing your earbuds into the charging case will automatically turn them off.

AUTO POWER ON
Removing your earbuds from the charging case will automatically turn them on.

AUTO POWER OFF
Placing your earbuds into the charging case will automatically turn them off.

AUTO POWER ON
Removing your earbuds from the charging case will automatically turn them on.

USING CONTROLS
In the Jaybird app, you can customize the functionality of the multi-function buttons to power your earbuds ON and OFF.

MUSIC/CALLS

AUTO PAUSE MUSIC

To pause the music, remove one of the earbuds from your ear.
To resume listening to music, place the earbud back into your ear.

THE JAYBIRD APP CASE

THE JAYBIRD APP

OVERVIEW

The Jaybird App lets you do the following:

• Customize the sound profile of your Vista 2 earbuds.
• Change the language for your earbuds’ voice prompts.
• Customize the buttons functionality of your Vista 2 earbuds.
• Select SurroundSense and ANC.
• Set up the ‘Find Your Buds’ feature to track the location of your earbuds.
• Use the ‘Find Your Fit’ feature to find the right fit for your earbuds and charging case.
• Update your earbuds and charging case when new features and improvements are available.

Your new sound settings are saved on your earbuds, so you can take your custom sound with you no matter where you go with any device you use.

DASHBOARD

EQ CUSTOMIZATION

SMARTWATCHES

With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair Vista 2 to your smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.

CONNECTION TIPS

Both right & left earbuds can connect to your audio device. The earbuds will automatically switch to get the best connection to the audio device.
For best Bluetooth performance, try to reduce the distance between your earbuds and your audio device. Try to have your audio device in an arm band, or in a belt pocket.

TROUBLESHOOTING

Soft reset: If your earbuds are not responding, place your Vista 2 in the charging case, close the lid and plug the case into charge.
This will turn your earbuds off and perform a soft reset.

Factory reset: If that does not resolve your problem we recommend resetting your earbuds to their original factory settings.
Before starting this process please FORGET or REMOVE your Vista 2 device from the Bluetooth menu on all your connected audio devices.

1. Place both earbuds into the charging case and close the lid.
2. Open the charging case and press & hold the case button until the case LED starts blinking white.
3. While the charging case LED is blinking white, press the button on the case twice.
4. The LED will blink pink. Once it stops close the case.
   Your earbuds are reset and ready to pair. Go to your audio device Bluetooth menu and select “Jaybird Vista 2” to pair again.

Hard reset: If the battery has enough charge but the device does not turn on and you don’t hear any tones, press and hold the earbud button for 20 seconds and then release. Put the earbud back in the case, wait for 5 seconds, then take the earbud out of the case.

SPECIFICATIONS

• Bluetooth Version 5.0
• Codec SBC, AAC
• Profile Handsfree, A2DP, AVCRP, SPP
• Effective Range 10 meters (30 feet)
• Play Time 8 Hrs*
• Power Bluetooth headset: 5.0V , 1A
• Charging Time 2 Hrs
• Quick Charge 5 Min = 1 Hr play time
• Dimensions 20.3 (W) x 15.3 (D) x 17.9(H) mm earbud size / 74 (W) x 36.4 (D) x 24.5(H) mm case size
• Weight Earbuds: Approx 4.8 g (without eargels). Case: approx. 32g (without earbuds)

Playtime and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the Jaybird app or using SurroundSense or ANC will reduce play time

WARRANTY, WARNINGS & SAFETY

Full warranty, care & maintenance details at: jaybirdsport.com/warranty

WARNING: Due to the isolating characteristics of these earbuds do not use while driving, riding a bike or where vehicular traffic is present,
or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these earbuds at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk. Do not wear the device while it is connected to a power source driven from main 110V or 220V lines.

WATERPROOF
Your Jaybird Vista 2 earbuds feature an IP68 dust and waterproof rating. Vista 2 earbuds are designed to handle rain, mud and outdoor adventures.
Jaybird earbuds are not designed for swimming, showering or exposure to pool or ocean water. In case of exposure to salted or chlorinated water, rinse the earbuds gently with fresh water and air dry before use. The Vista 2 charging case features an IP54 rating, it is designed to handle rain and splashing but not submersion into water. Please ensure your earbuds are completely dry before charging.

EARGEL CLEANING
Keeping your Jaybird earbuds eargels clean is essential for safe, hygienic use.

IMPORTANT: DO NOT attempt to clean the eartips without first removing them from the earbuds.

1. Firmly grip the eargel with one hand and the earbud with the other. Carefully remove the eargel from the earbud.
2. Use warm water and mild soap on a damp cloth to remove dirt and earwax from the eargel. Do NOT use harsh cleaning agents.
3. Rinse and completely dry your eargel before placing them back on your earbuds.
4. Carefully push the eargel back onto the earbuds.

LISTEN RESPONSIBLY

Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability.
Do not use around road traffic.

CARE AND MAINTENANCE

Clean eargels regularly of dirt and wax buildup. To clean, remove eargels from earbuds, then gently wipe away dust and oil with a dry cloth, and/or use warm water and mild soap to remove buildup. Rinse and completely dry before reattaching.
Before charging, ensure earbuds and charge case contact are completely dry of sweat and water.
Video instructions at jaybirdsport.com/support/vista2
Copyright 2021 Logitech. Logitech, Jaybird and the Jaybird logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the US and other countries. Apple, the Apple logo, iPhone, and iPad are trademarks of Apple, Inc., registered in the U.S. and other countries and regions. Amazon, Alexa, and all related logos are trademarks of amazon.com, inc., or its affiliates. Other trademarks and trade names are those of their respective owners. Any use of such marks by Logitech is under license or with permission.

Warning! Exposure to noise above 85 decibels for long periods may cause hearing damage.
Protect your hearing by establishing safe volumes.

Establish safe Ustenlng volumes.

• Start your audio playing device with the volume control at its lowest setting.
• Slowly increase the volume until you can hear it comfortabfy and without distortion.
• Avoid using the earphones in noisy environments where you may want to turn up the volume.
• Turn down the volume if you cannot hear people speaking near you.

Listen safely.

To use these earphones safely, avoid listening at high sound levels. Follow the guidelines established by the US. Occupational Safety Health Administration on maximum time exposure to sound pressure levels before hearing damage occurs:

Sound pressure level dB(A)| Petmiss ible n <Hse ex po su re dura tion per day
---|---
90| 8 hours
95| 4 hours
100| 2 hours
105| 1 hour
110| 30 minutes
115| Hearing damage will occur.

Protect your hearing during use.

• If using earphones with an unfamiliar or unstable sound system (airplane, public access ports, etc.) keep volume low to account for possible “break-in” bursts of loud sounds.
• Remove earphones if they cause any ear discomfort or you have difficulty inserting the ear cushtons.
• If sharing earphones, remove ear cushions and clean them with antiseptic wipes before and after use.

Hearing damage can be gradual and cumulative.

Your ears may adapt over time to a higher volume of sound, which could result in damage to your hearing. Sometimes. no obvious warning signs present for hearing damage. However ringing or buzzing In the ears. difficulty understanding speech, a sensation of pressure or fullness in your ears, or muffling of sounds can indicate hearing damage. tf you experience any of these symptoms, STOP using these earphones.

BATTERY WARNING! Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure battMies are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials. moisture, liquid, or heat above 54• C (130• F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or ln any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal rechargeab4e battery that is not replaceable. Battery life varies with usage. Non·operational batteries should
be discarded according to local laws. tf no laws or regulations govern. dispose of your device in a waste bin for ekK:tronics. Keep batteries away from children.
Perchlorate material special handing may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Do not Ingest battery, Chemical Bum Hazard. This product contains a coin/button cell battery. If the coin/ button cell battery Is swallowed, it can cause severe internal burns In just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

This product is intended to be supplied by a Listed/Certified power supply, rated 5.0 Vdc, 0.6 A minimum, Tma (maximum ambient temperature) 45 degree C and altitude 2000 m. If needed, p’8ase contact the Manufacturer for further Information.

UH Guklelines: Safe & Proper UH of Your Product

• WARNING: The product contains small, detachable parts, which may cause choking, personal injury,
  or death, especially in children. Please exercise care in the use and handling of small parts, and keep them away from children under 4 years of age.

• Do not use your earphones in any environment where a failure to hear surrounding sounds may be dangerous.

• Do not use your earphones while driving or operating machinery.

• Do not modify the product. Do not disassemble or attempt to service this product.

• Use this product only with listed ITE computers and accessories.

• Connect power supply to a properly wired and grounded electrical outlet.

• This is not a Children’s Product and is not intended for use by children under 14 years old.

• This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call Jaybird support. Product must be returned to Jaybird for any service or repair.

• Keep magnet away from devices and objects that could be damaged or impacted by strong magnetic fields. Magnet may interfere with certain medical devices.

• Refer to product Quick Start Gulde for use Instructions.
  See the product support page on the Logitech website www.logitech.com/support for additional information.

Logitech Compliance. The product complies with all applicable requirements for Restriction of Hazardous Substances (RoHS) and Waste Electronlc and Electrical Equipment (WEEE). For Product Safety, EMC, RF, Energy, RoHS and WEEE information, go to www.logitech.com/Compliance. Maintenance Is not required for product compliance.

Batteries. electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate coUection point to enable recycling and avoid potential Impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit
www.logitech.com/recycilng.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operatton is subtect to the following two conditions:

1. this device may not cause harmful interference, and 2) this device must accept any Interference received, including interference that may cause undesired operation.
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This equipment generates, uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or retocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to use or operate your product by the FCC.

IC statement CAN ICEs-3 (B) / NMB-3 <Bl
This device contains llcence·exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSSCs). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undeslred operation of the device.

Radiation Exposure Statement
This wireless product complies with FCC and IC radiation exposure limits for portable devices. This transmitter must not be co·located or operating In conjunction with any othM antenna or transmitter.

FCC II > JNZB00038 IC”‘418A·B00038

Logitech Limited Hardware Product Warranty – A summary

Logitech warrants that Its hardware product shall be free from defects in materials and workmanship for the length of time Identified on your product package beginning from the date of the original retail purchase. See support. logitech.com for specif IC warranty information about your product and procedures to act on a warranty claim. Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, to repair or replace a functional equivalent of the product. or to refund the price paid, if the hardware ls returned to the point of purchase or such other place as Logitec:h may direct along with a receipt. Warranty protections are in addition to rights provided under local consumer laws and may vary among countries. See full warranty information to know your consumer rights and the additional protections provided by this product warranty.

Logitech Address: Logitech, Inc 7700 Gateway Blvd. Newark, California 94560.
Full Warranty Information: support.logitech.com
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Appte product(s) identified In the badge and has been certified by the developer to meet Apple performance standards. Apple Is not responsible for the operation of this device or Its compliance with safety and regulatory standards.

References

• . Spend less. Smile more.
• dtsc.ca.gov/hazardouswaste/perchlorate/
• Jaybird Warranty & Returns
• Logitech Australia
• Logitech Support + Download
• dtsc.ca.gov/hazardouswaste/perchlorate/
• Product Compliance Certification Search | Logitech
• Global Recycling Program for Ewaste and Batteries - Logitech
• Logitech Customer Support & Business Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>